@d-healey Enjoy my man! ;)

@Christoph-Hart the FIR works with IRs at 128 samples.
I have to figure out how much latency in ms a 128 sample long IR generates at different sample rates and I'm good to go with my massively CPU heavy frequency shifter :D

Is there a sample based delay in scriptnode?

Copy the script I posted above, then right click in your script and select Load Script From Clipboard. This will replace your script with mine and will place the code in the correct callbacks.

@Lindon That's said man, so License Manager for me too, thanks!

@arminh you want to be avoiding then next gen of OSX in any case - until we have notorization sorted out.

https://www.kvraudio.com/forum/viewtopic.php?f=33&t=531663

@ustk said in VU meter to simple gain?:

@d-healey For the first, I'm not sure honestly... But if maybe each channel can still be routed to its normal output, but send a copy to a dedicated "measuring" bus, which is not sent to any output, so it stays internally for measuring purpose only... I'm just trying to imagine...

Untitled.jpeg

Think you could make a working example of this? :)

@Christoph-Hart said in ScriptPanel, check clicked ellipse:

You know there's a floating tile that connects to the curve eq, right?

Yeah, I know about it and it works great! But I can't costumize it, or can I?
I want to limit the number of Bands and change how the numbered nodes of the bands look.

Don't tell me this would have been possible with the floating tile after all I've been through .... :D

@ulrik Thank you! I guess I was over complicating things.

@ustk said in Changing knob values with ScriptPanel position:

Because what you want to read instead of the event.x/y is the panel's global position

I understand. The result is almost the same with getGlobalPositionX and getGlobalPositionY of the panel, but values of the knobs remain fixed at 20 and 8.

HiseSnippet 1248.3ocuW07aaTDEeV6LkZCNzhPHAhCqxAjCJ0X6lVhDf5RbrasBIwsNjVfCgI6N1dT1clM6NNolnH93DG4ZukSbmibi+G3OA9GnG4F7lYW6csiyWVpc8EOuu1euOl26ssBD1zvPQ.xH21C7oHi2B2d.W1qVOBiiZtFxXd7FjPIMvLhzpC7IggTGjgQ1GpHXjaNj94kOXUhKgaSSHgP6HX1zuh4wjITaYsNy0sAwgtMyKkzKa0zVvqIbE8A7jEWF4Sr2mzktIQIVFLx3F0cXRQPaIQRCQFyspvYP6dhi3QxuCKjsmKUcnBpMXnHxMDtNJDqnhp0i45zZneGh.qzJIJjMJJ7t3MXNrQzShF2RyvLQizwCiLWD7pjFdku5vyHE7lKBd2F21Nf4KS3nv1ahaxgDUGBjBRCqHYQY9wr3ZBPBtrjGYeZi.3vHMJd+xkWx7dkKu3mUHeg7PhHTZdHIvbctXuJleg4PU6Rk0Dd9BNbn3BZtKnzYbMpdgZTcBMZQBfTrLfcP8GqdW5RPkd06zgZCJMl.mQYN087QXD6IzIN7cwZlVnEhBKQ+hHUJjJ2PzOjVi35tGToVrSetsjI3EoGBFXwiKj2L9Q+GVGyHNkbBHcUrSDP1iEVxgHIkdNfmMHf6GP3coEAH8PWwdD2VhPlx3Oy7SFC9JP+TlirWwEWxDRgUTH8rlcvkX1uYJl8QTV2dxoY2j+oK.TghcHt8oEqVFd93TdSZszo9DYW4NEWIknCVbRYqTxtmBsNEOqUR3nYbR9SFlgFlELE7MER5V7hKl+374xeRdyIY0oyT4oJGBDttzfoxV00J3hTrHuu2dzfkfRMvOGIHb8c79C3yu+P51W1QUmoDTvaxYxs7o7yqqAJtjF5ejIFUfnRc2i4i6dz1k4PCPLnIwaf0wajFvwcjO88+2+vBckUt5XJCOlVnut4ZPlU0CKFN.D8oARlx6MVidHLbHpiVN7Zzv8kBesrwWAASG8RKfSUZpemymlREzySdsen0fjCet0QpqFiH7xe1pmtndDkSO1Bt9JNZ3kX.Xe.tlKC92RlORbHL36iLWCtu1kw6BQgTfK2kFNSf0e8sof0oGMArN86mDVnlVdjD0+0+1xK8r1ks7IA.HRglIhHnqAPqlBn+TXJf9aSBTztWBPgrNrrfea1OLpL5Eu3Oev0AsENub9MwIYarw+.1df5OeG7mIPYyofxqQV1W322eK9STlPKjZJZOXJcyvwoosYRwgQlKyO8GdEsI3OuMdrwZv1N5STMyafaDPO.VV5LC+gUPDN8cIxw2KQsLVLCnYzXK.nFxyg17CRur1qjkUtpv813VLocuoi2LSAup9Xuhwa7peEvQKcj.14vMd1q487xOrqXs9AGRqefFGSVujFRa12qAyEpcTiULL.OaUB2o7v.3u+KumkhPkXBVuy5OUSn536uyct6jDVNgvsrZzX65bB3aQwgriGGxd0lmMkzvSD8kvUHXAk.l51M3NsguBvlBYANbyQ6UYTi0hNWVcVAo1TsWhM9O3IlYkgg.EyJCY9Z4c3QrCD6ZGMyTkTuolB32b82vjC9XJ3r4nIsXb4RkQdv2TrqsspT6NPswz0o5LnycmAcVdFz4dyfN2eFz4SmAcV4B0Q84beYeovKpMDPnUc8RKFFIU5YP+OvGqFwi

@ustk said in Changing knob values with ScriptPanel position:

I would have done it with paintRoutine in one unique panel instead.

@ulrik said in Changing knob values with ScriptPanel position:

you should set, with the paint routines, a dot or something, that will act as a visual reference for the dragging.

If I could do it with paint routines, I would. But I know only how to realise one single dot on a single panel. Any pointers?

@Lindon This is very much appreciated! Thank You

@d-healey A-ha, I knew it had to be something obvious! Thanks so much again!

@arminh said in Inverting knob:

but it's not affect to Convultion reverb Dry level.

I didn't know you wanted it to do this :p

Post a snippet

@d-healey yes, but when I tried to load files via RMB, it didn't work either

Ok so importing custom wavetables is no good then? I'm using WaveEdit and added the wavetable to the AudioFiles folder, and... nothing. Where should they go for the wavetable synth to pick them up?

@ustk thanks for this. I appreciate it.

@Christoph-Hart Haha 🤣

@d-healey LOL - yes of course and now I'm using git everyday - which reminds me I should commit todays efforts - but I'm not quite brave enough(yet) to do the whole git-based build...