@d-healey It’s a bit old but.. I just wanted to say that I was able to get the internet connection working in the exported plugin using your fork of HISE (Linux). Thank you :) Not sure why it doesn’t work in the main dev HISE.

@Proteus1 said in Arpeggiator Sliderpacks for GUI operation / Mono Legato:

Component Specific Properties

Another question
regarding Mono/Legato

Are there component-specific properties for Legato with retrigger that can be switched to Legato Glide ,Portamento,?

I got this answer from the AI, but once again I can't find where to find the voice settings.

Variant 1: In a Sampler or Synth (e.g. Simple Synth / Wave Generator)
Open your synth module (e.g. Wave Generator or Simple Synth).
Go to the Voice Settings.
Activate:
Polyphony = 1
Legato Mode = On (or enable Glide / Portamento, depending on the module)
If you have an Amplitude Envelope (AHDSR), set:
Retrigger = Off
→ This keeps the envelope in its current phase during legato playing instead of restarting it.

I hope I'm not annoying you with my questions.

But if you search for hours and can't find a solution,

Big Hug Mike

Bildschirmfoto 2025-10-21 um 21.22.28.png

@Orvillain said in What are you using to build UI for your plugin? What's your preferred way and why?:

Do you have any resources on how to best optimize this conversion process?

Nothing in particular, I just select elements in figma to get the dimensions and fill settings, etc. and try and match that with my laf. If there are shadows or labels I might need to make the components larger than the dimensions of the figma element.

Unless I'm working for a client, I'm not always trying to make it 100% identical to the Figma, so if I nudge things around or adjust gradients in HISE, that kind of thing, I don't mind. It's easier than trying to force HISE to do something it can't do well, or that would require clumsy scripting.

@Christoph-Hart said in Question about compiling nodes:

as the autogenerated example node does.

Okay sweet that was my starting point so that explains it, muchas gracias

@ustk I’m afraid I can‘t help here anymore - at some point I ended up writing a completely own JUCE wrapper inspired by Christophs work because I needed JUCE 8 especially for the graphics but also neural stuff - so i‘m working with c++ 20 and juce 8 for a bit now. But in general it is always possible to undefine something only in the c++ node and also you can look at what is throwing the error and look at breaking changes between the c++ standards and/or JUCE versions and revert the methods back.

@ustk Yeah you're right. That's fine for my purposes right now, as I'm just blasting out a quick prototype for my delay plugin to send to a mate.

Same here, using the latest commit.
Things like:

using mono_cable = cable::block<1>; [x] .../DspNetworks/Binaries/Source/network_delay.h:117:27: too few template arguments for class template 'block' wrap::fix<1, routing::receive<mono_cable>>, [x] .../DspNetworks/Binaries/Source/network_delay.h:121:72: use of undeclared identifier 'mono_cable' jdsp::jdelay_cubic<NV>, [x] .../DspNetworks/Binaries/Source/network_delay.h:122:64: expected ';' after alias declaration routing::send<mono_cable>>; [x] .../DspNetworks/Binaries/Source/network_delay.h:123:56: use of undeclared identifier 'mono_cable' routing::send<mono_cable>>; [x] .../DspNetworks/Binaries/Source/network_delay.h:123:67: expected unqualified-id using soft_bypass4_t = bypass::smoothed<20, soft_bypass4_t_<NV>>; [x] .../DspNetworks/Binaries/Source/network_delay.h:126:45: use of undeclared identifier 'soft_bypass4_t_' template <int NV> using soft_bypass5_t_ = soft_bypass4_t_<NV>; [x] .../DspNetworks/Binaries/Source/network_delay.h:128:43: no template named 'soft_bypass4_t_' using soft_bypass5_t = bypass::smoothed<20, soft_bypass5_t_<NV>>; [x] .../DspNetworks/Binaries/Source/network_delay.h:131:45: use of undeclared identifier 'soft_bypass5_t_' wrap::fix<1, soft_bypass4_t<NV>>, [x] .../DspNetworks/Binaries/Source/network_delay.h:135:48: use of undeclared identifier 'soft_bypass4_t' wrap::fix<1, soft_bypass5_t<NV>>>; [x] .../DspNetworks/Binaries/Source/network_delay.h:136:68: expected ';' after alias declaration wrap::fix<2, multi4_t<NV>>, [x] .../DspNetworks/Binaries/Source/network_delay.h:140:48: use of undeclared identifier 'multi4_t' math::mul<NV>>; [x] .../DspNetworks/Binaries/Source/network_delay.h:141:49: expected ';' after alias declaration template <int NV> using soft_bypass6_t_ = soft_bypass4_t_<NV>; [x] .../DspNetworks/Binaries/Source/network_delay.h:143:43: no template named 'soft_bypass4_t_' using soft_bypass6_t = bypass::smoothed<20, soft_bypass6_t_<NV>>; [x] .../DspNetworks/Binaries/Source/network_delay.h:146:45: use of undeclared identifier 'soft_bypass6_t_' routing::receive<mono_cable>, [x] .../DspNetworks/Binaries/Source/network_delay.h:151:59: use of undeclared identifier 'mono_cable' jdsp::jdelay_cubic<NV>, [x] .../DspNetworks/Binaries/Source/network_delay.h:152:64: expected ';' after alias declaration routing::send<mono_cable>>; [x] .../DspNetworks/Binaries/Source/network_delay.h:153:56: use of undeclared identifier 'mono_cable' routing::send<mono_cable>>; [x] .../DspNetworks/Binaries/Source/network_delay.h:153:67: expected unqualified-id using soft_bypass7_t = bypass::smoothed<20, soft_bypass7_t_<NV>>; [x] .../DspNetworks/Binaries/Source/network_delay.h:156:45: use of undeclared identifier 'soft_bypass7_t_'

@Orvillain I was gonna suggest to try that but like....nah that cant be it. haha.

@ClawFORGE-Studio said in From HISE to Cabbage Audio (CSound) to VCV Rack:

how do you export a Hise project into csound ?

It's not possible as far as I know

@Christoph-Hart Thanks!

@modularsamples said in Recreating Roland Alpha Juno PWM Saw oscillator - ideas?:

@griffinboy Good point!

What about this? it should be pretty close to how the AJ works (I think) as it's splitting the signal and "chopping" the output of the saw. The PWM still happens on the pulse..

HiseSnippet 2170.3oc6Z0CaibbEdVRM5+KN14rgSQ.HBRw4fCBj5uyBo3n90VHG0QHJqjq5xvcGRNf6tylcWJIlf.b.oIcIsFHEtxUAHAoKEA45R.xkBCi.jJiz3B2cEI.oy9Myrq3rjKEonH44CWj.DzNuY1468226MCYYetIMHf6iLV7j1dTjwx3JscCaraCByEc3dHir3yQ6z1iDDPsPFFYeOg.iElAI+442eGhMw0j1YHD5TNyj9.lCKrynkK9CY11GPrnmvbzl85EOzj6tK2l2xWrY4QdDylj5ziHhokAideRPCjw2Gug4VaZZUcqplVadupqs0FEJrV97qs9ZE1vZMR002vZqUWkr4VHiY22hEx8qDRBoAHiY1ga0tRC94tpM3TV.qpMU7PATEXmUCe.21RnhhQQ61fYaUN15DfPF3xcrUYU1paiKwrXWNdGa12TJHWmUna.MxjDdYS.uB5vKuF7RARFZPZFEjdcbESelWXGIB7rD9P2PpeMB3mzghZtHimh2kCSvMbEGRS5A9vCWtf6rY972MG7m24GTqkqYHi6li6dDOj9P267NK9yWbgE+EKlqaQ0pkpLw13ysso9oJVDZ3eUK7NtsbpR8uatyH1snWNQP8SZSw82lp6xMUZs1D4tG5xBenG0seABnHSE7eevg6QBIBGQzXv77n9gLADL1idFjFnbKKf2iFzLj6AIB83yfnEtUKaRXxPHQhVj.vFjvuIbNtArv15Ihis3pgEhuNtLKzrQ5XLSJXDrTSBLFkMdK790pQMC6.vYvG7imLod5a+BwauJaRReJ29uczHtbKZN4vz.V.0uP+3S+2+9+4ecX4S8FZ9z3j76huNITyNRITIiY0l+COi5eFiddGR1TYzlcRQxNyv4ou5Z.uDj6lnlvBwXrBywyltu6YTaffRhw2.XjpQZYGFOZxnxRbWtWCtKyTOP7XZnOqdcpuN1SUg1NLDJi2YjaW7XpMkDnEo98J9.lKk3C1I5HZKJbsqOlp+5swJ3lSjJk6l32lpgYWI+a1gh+cri2QmKdpZ5lGu+Eg9jBCph0KXObDLW8EELOl2Jj4VuDAR6u.JBbTKmJPcESJ.QWWpsnvfQFQOQpmyKdV.nJTWK4CeI7SjvBhmMhDVHVnV6TGQCOm62Tl4F8+fIPXGlCGPNe6Rnsss4muK2wiEEvCwQxwJysaGSWYjQMiXPtsCuE79iPZmrkcr4lMqv9YzXPCGz3DByV7FpzJ.ZAz5gtUf2irZrQ1So9Ax8bNb9UfegjoijTWye.wDL8sKSfB+PVonqRvCR8Ww7ROYrFnmAnNgSrDw6JtrsBOfZ3HrLhCAIbkkI9vJf1xEcWlI10AYRY056Tw5IdBhOxH15kwGFbpPpIwFcpnLuX4x8SL8rJkXNwT+F3ZhsX0GWUXaPIzq2VSuRLqdUotdMWslMtziHmwrhot.1qAAhgWMoJbKPE7oqnjkBtmOZYC.wFYzwIRys.4cW9Dbh5RL2Hb1gAtD4htF642uRH0SEHpMVSnYII3STqETtYgtKBonSnWDdBW9tfTHn8J4dtD9Cbsn0.ujE.r5pSPWoU02ym2xS9PO6dTe.8LN5pUk0K1ip7q9zhcoJezG9g+odUkh+Rm+w8UmK8.e5OsEjg0dLoOOoYwT0GX7AnOO+985ZxW754ZVVpO4NVvu7B2AMrwZ.gbeUn4vkaHZZaLoKHT55hf7uCKDvH5YCm0ouzpJwoRkJkLZDNoxjLGVwgO.J9zvhRx.nRtQTdFZ.cVb8dv4RJ9t5oivnUL5bcY0h+Vd3h+d2gif3o0+CuYwXtN.iS7vusaExc.V0nFrj6fzTc8ywJ9qGNc7m7s16SiHAq3v4gMfFslzJ55ChD7QOsWeFvObs7YKiOlFPi15wjB8nm1WhC8PRcVj4UIfElTotiq9VlUCyKhc3VoP3baMTe4L5E3ZKe5fcbBBHvO3kJAjTPZDPRACf.ZlDDPcZe+DhecZn5BYE2twEw2E6dLnJ.o8NsfSfptFfDiHzLH36h3CfruSUpEXMjKO9PI8kmq6bFYtvHyAn03PYpOiaIuKuwPNy+6Sd1uyJ8NgPOp3TnwgkvOfy8fSi5GNEZdXxqOSslt0xnvXOVWzWKfgpTMVwikR5jZ5id4bioQ6ji0pB8yLhJlzLFzMe5hJyXPprnp4+pjcDUbXriyg8njlERkgWHI0JopkbSo3ke.atTS0c9H6O+PKYDuCoiwWLTrkYRWTPuSCEL54lFje9JqHDkZtJL9HdNkg2.MmrE+BIMQQ8T2+ZbK8xQP6v0LO5pUrm+Wt4J1h3R.LXd1sm70G5qts7jwogwaaY80hye0IoKpcyZPytcSFIo0kBRqcSofwCw9W2yQNwe8u3K+6e1PFGkfkudumZ5E6EIj1My89WyFrGiWj.qVsLoTv7IYQnbE0ic6at5KGWjvS9jm8ruawWctHgjmkEpklJ4hTPpmkUH3+28culRYugWilFiVwDpmwHxpT6HZ5zyX78JaSI9IsKKqBwTRR8dojRdk5nIng6h+5+CZF8agc3t7UC.ITdRS+anBI0k2qCH45GY2fNj.WNyhk1MU9l524W7bRATK04ML09vFdMLOvjYaC+U9MGJAveKLwkX2Nfth9jR8iINwDtNferlpBu8gLXJQmJyMoRf1sA2KnShvi9a67V+wey+purs5DcWEumr62zOr7zPq9QLKH53xWy+8iu2e9KJ8Q2PsJka.PchEcUZ9Iyw9vhaauiB8a+r+yGeuuym2WEZvDhirJqc.TzNbdSGh7aQyn88SdZ7c9wgX5yebzUjHT04ki.4WtRlgEvkDOmq.5rtMiBxtGaZl7U0yBWcTW3Zi5BWeTW3Fi5B2bTW38F0E9tCdghuRtQm6QD1BTGk2WwxZruKopczo5+J38.PLC

This is a pretty good read once you get past the flame war:

https://www.kvraudio.com/forum/viewtopic.php?t=420194

Yeah, I read a lot of that thread. Pity about the flame war! 😂 🔥

The snippet sounds awesome! Great starting point for me to learn how all this stuff works.

Thanks! 🙏

@HISEnberg alright got it! Never worked with the autocomplete, but seems like a grea idea :D

@pcs800 can you screenshot your property editor for your analyzer?

@paper_lung Isn't that what you want?

@pcs800 the pitch shifter node is broken, you can roll your own using Rubberand (or signalsmith or any other license-compatible library)

https://forum.hise.audio/topic/13256/tutorial-real-time-pitch-shifting-with-rubberband?_=1760500331839

FFT-based pitch shifters will always introduce some latency, it's unavoidable

@Christoph-Hart Ah yes that fixed it thanks!

@pcs800 You can right-click any parameter in Scriptnode and change it's settings including the min-max values. There's also a bunch of control-nodes (checkout the control.minmax node) which allows you to map parameters that have different values.

@Christoph-Hart
Thanks for the tip! :-)
I did it manually and it works great. Next time I'll use this! Thanks to you.

@mosashatrain said in Hello. How can i fix this Xcode problem with compiling VST?:

could not compile hise

You need to be able to compile HISE before you can compile your projects.

Remove any preinstalled versions first.

I cover the process of compiling in my free course:

https://audiodevschool.com/courses/hise-bootcamp/