@d-healey Hum... That does seem possible as I still need to update those components...
I'll try with a general flag to see if it's not too dirty (well, it can't be worse anyway...☺ )

@Christoph-Hart said in SNEX For dummies 2:

Same with the Math class. There won't be a Synth class though and most probably no Engine class - I'll think about the latter, but SNEX has to be useable in multiple spots where the access to the "global engine" might not be available.

Thanks mate!
My goal is to build a synth capable to generate multiple sine waves using data frames like this one below . I'm in the right place (SNEX) for my future devs???

[#sine osc: freq, amplitude, phase] 1TRC 1 0 0.0249887 1TRC 0x0004 26 4 0 4720.89 0.000139671 -0.806801 1 4450.89 0.000184206 0.256434 2 3970.74 0.000126725 -0.242524 3 3735.95 0.000125689 1.58192 4 3510.61 0.000173862 0.272434 5 3342.09 0.000151657 0.521128 6 3000.99 0.000464915 -2.15388 7 518.579 0.0129921 0.942587 8 659.448 0.0225252 -0.377563 9 785.758 0.00866297 1.20015 10 926.962 0.0124319 -0.55132 11 1057.06 0.00364636 0.910611 12 1438.79 0.00743512 1.2696 13 1699.71 0.00493992 -2.72891 14 1834.94 0.00237093 -2.24004 15 1961.01 0.00362062 -0.517616 17 2223.36 0.00232627 1.38036 18 2362.46 0.00196192 0.670547 19 2483.28 0.00127425 -2.12119 20 2623.2 0.00156323 3.03368 21 2742.53 0.00078575 0.680789 22 2883.19 0.00119679 -0.48985 23 3144.71 0.000859497 1.47357 24 269.348 0.021707 1.14387 25 130.604 0.00496798 2.30956 26 390.77 0.0226341 -0.0619304 1TRC 1 0 0.0499773 1TRC 0x0004 27 4 0 4719.22 0.00041282 -0.68785 1 4451.15 0.000578673 1.61273 2 3977.44 0.000254083 0.174588 3 3738.57 0.000309721 -2.88493

@d-healey said in Module Parameter Index list? where to find?:

customise the interf

Got It!!
Thanks very much!

The only way to do that is with an array of values. Like this: https://forum.hise.audio/topic/1976/slider-value-display-customisation/5

And...... YOU WERE RIGHT!
It works now, thank you so much, David.

@musictop

In the button's callback put a loop that hides all of the panels if the button's value is 0 and show's them if the button's value is 1.

@d-healey said in controlling Sliderpack idx from a different OnControl??:

also used in the vol.getSliderValu

Aha, ok. Working!
Thanks so much for your patience and help!!

@Lindon ......?😬
I dont know what your problem is. Not sure why you getting all hi-and-mighty here.
For me, nothing is crashing so far. So if it works for me, its good enough for me. Time will tell.

@ustk I have a video about it on Patreon. :)

@Christoph-Hart @d-healey already diving into (yeah I'm that anxious) . I need to solve a DSP thingy some how... so I will adapt it later to the new SNEX I guess.

I'm sketching in Faust, and trying to reproduce that on SNEX....

@dustbro It's because the player was in a multi, which separates left and right channels... For parallel treatment, you need to use a split instead

Ok, that's where I applied for the past few months ;-) Hopefully Ed will get back to me. Thanks!

😬 👍 👍
Thanks!

@Christoph-Hart well you're going to have to excuse me I'm an old SmallTalk programmer - encapsulation is nearly everything...

That's it @d-healey ☺ ☺ ☺ 🖖
Wow, I'm blown away by the speed with which you work all this out!

True legend!

duuh! i knew that!😬
Thanks for answering!..a stupid question.

@d-healey said in Basic info:

@Lindon Only if it needs to be changed at run time

of course...

@Lindon said in Hise compile error:

@Steve-Mohican what do you mean by "When I save the project in JUCE" do you mean when you save the projucer project file? Post a snapshot..

Yeah I selected "IPP Enabled" and saved the projucer project. That message is coming just after attempting to saving.

@ustk said in Hise compile error:

@Steve-Mohican "Hise-scriptnode_codegen_rewrite" is not a working branch

"Hise-scriptnode" might not work (although I'm not sure). What I'm sure is that it does work until January 20th commit

Currently and until the release of V3, it seems that the most advanced version is @d-healey's fork:
https://github.com/davidhealey/HISE/tree/develop
It's a working scriptnode version with some ameliorations in the waiting for @Christoph-Hart's approval/merge...

Ok now I understand, the scriptnode branch is not compiling too.
Thank you so much for the suggestion, I will try @d-healey's fork.
And also we will wait for v3 :)