Topics created by problema

@problema said in Modula:

Thanks for answer!
Sorry, I forgot to indicate that I talk about sine wave cycle of LFO

if you want a value to go from zero to one for each cycle you are not talking about a sine wave...

@problema If you're using the settings class then I think it affects all samplers equally so you won't need to do the looping thing I mentioned.

@Christoph-Hart
Ok, thank you!
What can I do with lags in DAW when the Scale Factor is more than 100%, except not use it)?

I’m running a sample based Synth with 44.1kHz/16 bit (internally obersampling 4x) and I don’t hear aliasing though when I look at the waveform I can see it is distorted a little. So, what’s your experience? Where does it become audible to you?

I have to add that I use to not transpose a sample by more than +/-2 semitones with this synth so I can’t tell how it sounds with more than that

Found the solution in one of the forum topics.
I added ENABLE_ALL_PEAK_METERS=1 in Extra Definitions for Windows/OSX of the project settings and now LFO modules work as it should!
`

@d-healey also working here... Weird
@problema your browser is too small so the pop-up area gets cut. IIRC you can change the font style with laf, but AFAIK centering the input field is not possible without getting into the source code. Either do that or expand your browser's horizontal size.

@d-healey Thank you as always!
The reason was that I renamed the scriptnode fx module before compiling, but the name didn't change in the xml file.

@problema do you have snippet showing the problem?
It doesn't happen here when I try

@ustk thank's a lot!

@d-healey okay, thank you!

@orange yes, I used valueNormalized.
In your snippet - if i change the style knob to "Horizontal" (in Property Editor) the mouseSensitivity will stop working.

That's was the issue when i tried to separate drawRotarySlider and drawLinearSlider with LAF.
Now I use only LAF drawRotarySlider and separating rotary knobs and horizontal sliders with other attribute

@orange this is exactly what I need. Thank you!

@problema Ooops, you're right. I've pushed a fix that shows the correct state of the button now.

@d-healey thank you David. I think i find a way to do this with Engine.isMpeEnabled()

@nouslou Are you calling the function inside a paint routine or LAF function?

@d-healey wow! It works and it's so simple and don't needs any scripting.
Thank you very much!