Preparing for HISE 2.0

Christoph Hart

Hi everybody,

I think it‘s time to get back on the master branch, which would also be the point of calling it HISE 2.0.

I‘ll be doing this step in a few days, so if you’re already working on the develop branch and have any unsorted major issues, let me know then I‘ll try to fix these before the merge.

d.healey

@christoph-hart Exciting times!

Major Issues

Adding the module browser to the interface causes an instant crash/close. This build is from the 28th of October. Previously, when I did have the module browser there right clicking on the modules brought up a blank parameter list.
There is still the issue with LFO when used as pitch modulators still changing the pitch even when the LFO's intensity is at 0.

HiseSnippet 874.3oc6W8zaSCCE2tsFsMfAHFRbrGfSHPqiw.Nsr00NMQ2V0R2.INLLIu1ZQhcHwYP+Tv2Ej360NyEvNoswQjMZGkg.QNTk2y9E+y+d+ssCENPTjHDgmuyf..guFwd.W1udeJii1YKDdQxtzHIDVMU0lCBnQQfKBiKusVAd9JnjmSWeSpGk6.YpPniDLGnEymIyz115ELOulTWnCy2X2qZsiifWW3IhU3oLYYT.04czdvdT81JQP3qzvkIEg1RpDhP3JaJbGX2W7Ad59OhEwdqGnEpgrUenT0MEdtZDqeGUuOyys8n6cDBgIsyXgxorvRjcYtrw5yXialrP0LKL4CboyCd0Lg2xEBuZE.OjA5pjhNEHDtwdTYdjocGCWfIx6o1gKAdDSNvzc8GEt2hzlIc5WLdKU.dUNpe23cny+5jFc6BNxLvVgz7UWtd5ESgxUI1LNjjQl.j6jHW8kzSfpaCbHTSpmUNok0W+7jlSFLw4j66HUmdmPJOJPDk6CaC9rNBtlPxTdXDzLDd+AZmro95BZXgKc55MU2wBswlJiCShV1vWDyk4hNJOwtDyZC4SZL1eAEJp7+BEIvs7jA2BXPrAFWXDFsY9AdPC9IfmPoIs5vVPWZrmbrVSPtqfKB5K3LGy.fC.YHqWOHLWKIVfviFdlWsMjRUOlLMKYc.3ATy356Y0REORCULFbAYkZSNqbddt6RRgaUcNZ0+MJ0W9WsT+TznG+iEXIjVM2OAk2P+V0wv+bw3aN7vuXDZURWrJF3NF2g4rzES2Ia9HqOYoKa2UD5mdzYdmVPO0QZpoC3GHTk8yEfa6KDx9Ldu7knWxpkPDzfSUDhq4GodbjT3O5PQ36SVY0Gk+4j8U+z8A5Wed8DYjsDB1hJoH7qIqkrei0e79yFYzrK4ozDFEd6D+6XOo1SOSyatfwgjTHu.otfGIopdZZvZH9SwnQItYFqhlJRcb3+LmT+6bNtCDwRUZ5tTUCoOpbw6E6aqlexATHgyAO0AQvkzy.kJurVNc.Jtahv2TOCWrlVFObwZiV7R4L7oNghiUy+ICEd5.24Rznt27j+Q17p+ZnRtZMzITu3grjuZrmicbzj8CUrSwVrxTawimZKVcps3ISsEqM0V7zo1hmcNVnmwbiXUU9z9pJEsajV7FOtg.tL56+NBGK.

The embedded impulse responses are still not working correctly in the exported plugin. It's very strange because some of the impulses are embedded correctly but others aren't. This is the project I'm building that requires the functionality - https://github.com/davidhealey/sordina - I'm not using IPP btw (could that be the problem).
Last time I tried switching back to my wav samples from the HLAC monolith by changing the flag in the sample map it didn't work. The sample map loaded but it when playing back the wrong samples were being triggered.

Minor Issues

In the sample editor it's not possible to change the displayed group until you select a sample and make some adjustment to it in (like change the start position).
Also in the sample editor the buttons above the waveform don't update their icons when they are clicked.
My HISE interface often resets. Every couple of days I'll open HISE and it will have reset the layout to the default. This has been happening for a while but it's a minor inconvenience so I haven't bothered mentioning it until now.

Christoph Hart

Thanks David, I lost track of all the things you were nagging about :)

hisefilo

@christoph-hart the only thing I face daily is IPP checkbox un Mac. It still including IPP even if it's not checked

orange

Hi @christoph-hart

If fx the plugin has convolution reverb unit, knob automations of AU plugins, cause crash or cound clicks. (I've tried with the latest HISE version)
Custom Shape Modulation (in tempo sync mode) synchronizes only play button triggered in DAW. ıt should be in sync as soon as plugins is loaded.
ALL exported AAX fx plugins' have "Modulation" category. It would be good if the "AAX plugin Category" and "VST Plugin Category" Settings were added in Preferences page.
FX plugin mono in - mono out support :) (yes I know it's not a straight forward fix)

Lindon

is this turning into a feature request? Okay! :-)

I know I can build send with the containers but its awkward and frustrating, so a nice send module would be nice.. Okay feature requests OFF....

Bastiaan

#define FEATUREREQUESTMODE_H_
    bool syncedOscilators = true;
#endif

Christoph Hart

Nah, this is more a „I worked with the master branch version, but the development branch version set my house on fire“ kind of thread. If I start accepting feature requests, hell breaks loose ;)

hisefilo

@christoph-hart if you want to use a svg flat version for the HISE logo on 2.0 :)

<?xml version="1.0" encoding="utf-8"?>
<!-- Generator: Adobe Illustrator 16.0.0, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
<svg version="1.1" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
	 width="354.036px" height="339.034px" viewBox="0 0 354.036 339.034" enable-background="new 0 0 354.036 339.034"
	 xml:space="preserve">
<g>
	<circle fill="#2A2B2A" cx="172.636" cy="163.444" r="128.4"/>
	<path fill="#67C18C" d="M172.636,296.703c-73.479,0-133.26-59.779-133.26-133.259c0-73.48,59.78-133.26,133.26-133.26
		c73.48,0,133.259,59.78,133.259,133.26C305.895,236.923,246.117,296.703,172.636,296.703z M172.636,39.903
		c-68.121,0-123.54,55.42-123.54,123.541s55.419,123.541,123.54,123.541c68.121,0,123.54-55.42,123.54-123.541
		S240.757,39.903,172.636,39.903z"/>
</g>
<g>
	<path fill="#67C18C" d="M128.394,195.541h-11.242v-24.618H93.026v24.618H81.784v-59.985h11.242v23.803h24.126v-23.803h11.242
		V195.541z"/>
	<path fill="#67C18C" d="M159.713,195.541h-11.201v-59.985h11.201V195.541z"/>
	<path fill="#67C18C" d="M210.322,146.466c-0.305,0.609-0.657,1.037-1.058,1.286s-0.878,0.374-1.431,0.374s-1.176-0.214-1.867-0.643
		c-0.691-0.429-1.507-0.906-2.447-1.431c-0.94-0.525-2.04-1.002-3.298-1.431c-1.259-0.429-2.745-0.643-4.459-0.643
		c-1.549,0-2.897,0.187-4.045,0.56c-1.147,0.373-2.115,0.892-2.904,1.556c-0.788,0.664-1.376,1.459-1.763,2.385
		c-0.388,0.927-0.581,1.943-0.581,3.049c0,1.411,0.394,2.586,1.183,3.526c0.788,0.941,1.832,1.743,3.132,2.406
		c1.299,0.664,2.779,1.259,4.438,1.784c1.66,0.526,3.353,1.086,5.082,1.68c1.728,0.595,3.422,1.286,5.082,2.074
		s3.139,1.784,4.438,2.987s2.344,2.676,3.132,4.418s1.182,3.858,1.182,6.347c0,2.711-0.463,5.248-1.39,7.612
		c-0.927,2.365-2.282,4.425-4.065,6.181c-1.784,1.756-3.961,3.139-6.534,4.148c-2.572,1.009-5.517,1.514-8.836,1.514
		c-1.908,0-3.789-0.187-5.642-0.56c-1.853-0.373-3.63-0.905-5.331-1.597s-3.292-1.521-4.771-2.489
		c-1.48-0.968-2.8-2.046-3.962-3.236l3.236-5.351c0.304-0.387,0.67-0.712,1.1-0.975c0.428-0.262,0.905-0.394,1.431-0.394
		c0.691,0,1.438,0.284,2.24,0.851c0.802,0.567,1.749,1.196,2.842,1.887c1.092,0.692,2.378,1.321,3.858,1.888
		c1.479,0.567,3.256,0.851,5.331,0.851c3.18,0,5.642-0.753,7.384-2.261c1.743-1.507,2.614-3.671,2.614-6.492
		c0-1.577-0.394-2.862-1.183-3.858c-0.788-0.996-1.832-1.832-3.132-2.51c-1.3-0.678-2.779-1.251-4.438-1.722
		c-1.66-0.47-3.347-0.981-5.061-1.535c-1.715-0.553-3.402-1.216-5.061-1.991c-1.659-0.774-3.139-1.784-4.438-3.028
		c-1.3-1.245-2.344-2.8-3.132-4.667s-1.182-4.169-1.182-6.907c0-2.184,0.436-4.314,1.307-6.388s2.143-3.913,3.816-5.517
		c1.673-1.604,3.727-2.89,6.16-3.858c2.434-0.968,5.213-1.452,8.338-1.452c3.54,0,6.803,0.554,9.79,1.659
		c2.987,1.106,5.531,2.655,7.633,4.646L210.322,146.466z"/>
	<path fill="#67C18C" d="M267.154,135.556v8.877h-26.591v16.635h20.948v8.587h-20.948v16.967h26.591v8.919h-37.833v-59.985H267.154z
		"/>
</g>
</svg>

I know this is for issues / bugs, but just thought I'd mention the polyphonic lfos again...

Dan Korneff

Has the parameter list in the Module Browser been fixed yet?

d.healey

@dustbro said in Preparing for HISE 2.0:

Has the parameter list in the Module Browser been fixed yet?

That was the second issue posted in this thread :p

orange

@d-healey said in Preparing for HISE 2.0:

@dustbro said in Preparing for HISE 2.0:

Has the parameter list in the Module Browser been fixed yet?

That was the second issue posted in this thread :p

Fourth actually :) First two lines are the issues in my post, these aren't future requests ;)

If fx the plugin has convolution reverb unit, knob automations of AU plugins, cause crash or cound clicks. (I've tried with the latest HISE version)
Custom Shape Modulation (in tempo sync mode) synchronizes only play button triggered in DAW. ıt should be in sync as soon as plugins is loaded. (for fx plugins)

Christoph Hart

What parameter? The damping and decay parameters are not supposed to be automated because they recalculate the entire IR.

orange

@christoph-hart It's not about any specific parameter. If the fx plugin contains a convolution reverb unit, any parameter automations cause distortion sound while automating (only in Logic Pro X - AU plugin).

For example I've made a plugin that is a combination of convolution, eq and delay. If I automate a delay or eq parameter, plugin couse distortions. But if the plugin doesn't contain convolution reverb, it's ok. I've experienced it several times.

In AU plugins, there is an issue for automations while the fx plugin has conv. unit.

Christoph Hart

Ah Ok so this is only happening on Logic? Can you make a minimal example for me to replicate?

Christoph Hart

@d-healey said in Preparing for HISE 2.0:

The embedded impulse responses are still not working correctly in the exported plugin. It's very strange because some of the impulses are embedded correctly but others aren't. This is the project I'm building that requires the functionality - https://github.com/davidhealey/sordina - I'm not using IPP btw (could that be the problem).

This is weird. I can reproduce it and can pin it down to the FLAC encoding in JUCE - when exporting, all embedded audio files are encoded to FLAC to make the binary as small as possible - however if the impulse response is smaller than 4096 samples (which is the case with ~20% of the impulse responses of your project, it fails to encode.

Fast fix: use uncompressed audio format for files < 4096 samples. Longer fix: debug FLAC.

Christoph Hart

Oops, apparently, I've used the JUCE class wrongly so it didn't flush the last block. Should be fixed now.

d.healey

@christoph-hart Excellent!

staiff

HISE 2.0 depend of new JUCE 5.4.0 ? or same as actual JUCE/HISE version ?

remember a thread you wrote about JUCE and SDK updates for adding new functions & modules in hise ...

Preparing for HISE 2.0

15

1.8k

10.3k

90.3k