What is the process for writing my own module (not scriptnode)

Orvillain

@Christoph-Hart said in What is the process for writing my own module (not scriptnode):

Was it the thing with the transient detection and trying to send back the beat slice positions back to the HISE UI?

I think in large part, it is because I don't really understand ScriptNode very well. Oddly enough, I'm more comfortable writing code than I am using a UI "msp" style interface. I guess my brain just works that way. I assume that ScriptNode is not limited in any way that would prevent me from doing what I am doing.

But yes, performing my transient detection in ScriptNode. I don't know exactly how to do it. I've got code I have written in HISEscript actually, and it isn't too bad. Quite performant with the Buffer object handling the brunt of the data processing.

I totally understand you though. If writing my own module is just going to be a huge pain in the bum, and you wouldn't recommend going that route... then absolutely I'll take your advice!

Christoph Hart

I think what would help tremendously (not just for your particular example but in general) would be a better way of sending data between the C++ nodes and the scripting layer.

I'm currently extending the global cable system to be able to send any kind of data blob, with this feature you can create a C++ node where you calculate the transients in C++, then send back an array of transient positions back to the UI for display.

Orvillain

@Christoph-Hart That would be awesome!

I've got @griffinboy 's C++ node video queued up on Youtube for later, so maybe I'll go watch that and it'll show me how I should be doing this. Porting my code over to c++ shouldn't be too hard.

Is it possible to access Hise's FFT code from within a C++ node ???

griffinboy

@Orvillain

Yes it is. You can also access the Juce FFT and any libraries that Hise uses for FFT.
My own FFT c++ node did this

[Free dsp] C++ FFT

For @ustk Simple FFT implementation using Juce (C++ scriptnode) https://1drv.ms/u/c/6c19b197e5968b36/EcVjEd7aayFHhItxr2gISeMBUD15DXs-oPHNg9Os9pYXWA?e=EW0gfm ...

Forum (forum.hise.audio)

griffinboy

@Christoph-Hart

Yay. This is a feature I've been wanting for a while : )
Good luck

Orvillain

@griffinboy That's awesome. I best get to learning!

Christoph Hart

Alright this is pushed now. You can send any type of data through a global cable and pick it up in your C++ node.

Here's a snippet that shows the usage. It contains a AudioWaveform connected to an external C++ node that will scan the audio file and send back some properties in a custom JSON object.

In order to use that example you'll also need to create a External C++ node and compile that before loading the snippet.

Create an empty project
Use Tools -> create C++ third party template. Use this exact string as class name: data_node, otherwise the compiler won't pick it up.
Replace the entire autogenerated code in the file DspNetworks/ThirdParty/data_node.h with the code below.
Compile the networks and load the snippet.
Load an audio file into the waveform on the interface, sit back in awe and see how the console spits out a JSON that was generated in C++.

#pragma once
#include <JuceHeader.h>

namespace project
{
using namespace juce;
using namespace hise;
using namespace scriptnode;

enum class GlobalCables
{
	dataCable = 0
};

using cable_manager_t = routing::global_cable_cpp_manager<SN_GLOBAL_CABLE(-389806413)>;

template <int NV> struct data_node: public data::base,
								    public cable_manager_t
{
	SNEX_NODE(data_node);
	
	struct MetadataClass
	{
		SN_NODE_ID("data_node");
	};
	
	static constexpr bool isModNode() { return false; };
	static constexpr bool isPolyphonic() { return NV > 1; };
	static constexpr bool hasTail() { return false; };
	static constexpr bool isSuspendedOnSilence() { return false; };
	static constexpr int getFixChannelAmount() { return 2; };
	
	static constexpr int NumTables = 0;
	static constexpr int NumSliderPacks = 0;
	static constexpr int NumAudioFiles = 1;
	static constexpr int NumFilters = 0;
	static constexpr int NumDisplayBuffers = 0;

	data_node()
	{
		// this doesn't do anything, but if you want the communication the other way around
		// (from HISE to your C++ node, this is the way to register callbacks).
		this->registerDataCallback<GlobalCables::dataCable>([](const var& funky)
		{
			jassertfalse;
		});
	}

	// We don't need any of the DSP callbacks for this example so we can use these macros to
	// define empty methods
	SN_EMPTY_PREPARE;
	SN_EMPTY_HANDLE_EVENT;
	SN_EMPTY_PROCESS;
	SN_EMPTY_PROCESS_FRAME;
	SN_EMPTY_MOD;
	SN_EMPTY_RESET;

	void setExternalData(const ExternalData& data, int index)
	{
		if(data.isNotEmpty())
		{
			// convert the data to the juce::AudioSampleBuffer class
			auto buffer = data.toAudioSampleBuffer();

			// fetch a few properties from the buffer
			// (this is the place where you could do your custom processing
			auto magnitude = buffer.getMagnitude(0, 0, buffer.getNumSamples());
			auto rms = buffer.getRMSLevel(0, 0, buffer.getNumSamples());
			auto length = buffer.getNumSamples();
			auto channels = buffer.getNumChannels();

			hise::JSONObject obj;

			// write the values into the JSON object
			obj["magnitude"] = magnitude;
			obj["RMS"] = rms;
			obj["length"] = length;
			obj["numChannels"] = channels;

			// just attach the current knob position so you know it's working.
			obj["knobValue"] = value;

			// send the JSON object back to HISE
			this->sendDataToGlobalCable<GlobalCables::dataCable>(obj);
		}
	}
	
	template <int P> void setParameter(double v)
	{
		// just save the parameter to be send in the JSON object later.
		value = v;
	}

	double value = 0.0;

	void createParameters(ParameterDataList& data)
	{
		{
			parameter::data p("MyParameter", { 0.0, 1.0 });
			registerCallback<0>(p);
			p.setDefaultValue(0.5);
			data.add(std::move(p));
		}
	}
};
}

Orvillain

@Christoph-Hart Did you forget to put in the hise snippet Chris, or am I not getting it???

Christoph Hart

@Orvillain oops yeah haha will post it when I get back.

Orvillain

@Christoph-Hart No problem! Thanks for the quick turnaround. This is going to be seriously cool, I can feel it!!

Orvillain

@Christoph-Hart Hey dude, any ETA on that snippet?

Christoph Hart

@Orvillain There you go:

HiseSnippet 1230.3ocuWs0aiTCE1SZmtz.qDU.uOpOkBUQIj1rcYEhjlKKAHsQaJk8sJGONIl3wdjGOsMfVo9HOxOU9G.G6YlLSXydQQvlJUkyM6OeNemicFojDZTjTgbJe0xPJx4SbGuTnm2YNlIPC5B5c6h03qnQZz4KCwQQTejiyNO2X2Y+cQ1O+02cNliEDZtJD5ZIiP+IV.SmqcTqejw48w9zqXAE79jVCHRQGIWFCXYG2ZnPLYAdF8BrwsRtnuGGMG47kt0O6oD7IjSaVmdxjl9Owu4DxYjFSwM7e5o3F1u1rQiFHm854yzR0XMVSiPN6dtze434x6DIav0rH1DN0HTGMF14D08kbeyQznE0YNi6OJKIEgfUYTdJamjT1m6Nj4yVoOO08oVCd4QTLA5TZc3syZvqdQ3Uq.71.jbJ.ocSfzAtiIJVnN2hAOer6.glplhg5TQnj3KpzCNtcjfGBc0.7BZeEHrJhJMqU6XO3eG8rxkgZUj16VrxSE38sd8DyXBZ0YT8y4xIX9KjwZlX1Pr.pfpJqGgOPm5fgiFDnJvDjUpxgqLbnIfURUUzYrH.EcsZ37I.ynxzXAQyjhJF+Np7uWde.5QRv8PESnqbX21W09a7Nz6q7zJC7s9AK7qN5YYw5IEWH0zKEUrKP4WU16eaZ5zMZyjlTRN2b31fYC2V81BrhHNXBUcLjP3wzUNB0u0IEtuYRQQNKIopUvQoXffouLjJdSLYTZo1PfRQEzxnszmuHk9zN1mI+E7szoRU.h4anzqoqNxd.J10axy1FVEVLiBGDEz965XLY0zS3mIi94AlZZFB.v..LjpzLyY2oK8VX.RBgde2tznEZYn02fPov.8s.u2uBqOzp0xbgen0cLe87UJ9yGZElksF3amKZ2Bu9uDxludGGzqK8i4X85C.LiISM.Df055LcVhHldYwwn+mMU38EhG3NhoIy2LFKsALBUq+OvX5rzG61a5TJQmCvcc6+xO.CNcS1+xokYXOMa9ZU8hf3h3.KwpOia6ScLD5z4nN+gadKenhFhUzqji33kUhvAgb5K.fer2DtjrXL62nu9bhTl24FOpPliEBJOZaFmr26cpp9auRsZhtVwfVHW37OFtplP6jhNSNnjYpRhbsrd7wTguU3ugOoFquJgAFqmYLefD5Bp9NoZgsFk9cjyiLEj8cuSgCCghv0TUjgt57H2ZUg+Ps4b4clYCrThLTlr5FI4KCmKELhQUhGY3tcfLVny.O7FiqvLtg4ONNBFd5eoXL3r8gMFl2ERe3a60GSfr5xQXy.iCbMieA5JUUkrh1lCzbZiI2l7dlbqlUL6YOIYL.fA1gavLTfnA1SxCIacx83lgr2HLZVCJelKvb9Un8oZtCaZ6Kt.uK.LBqfXfqeS5Xxj.mGxDWmL820TBPCw2uRtNHaf5icGtLOlTy6At2rIpKcJNlqKrFmZ2bnC49r6EJzjUTBYFe5SuO4PkCDqzJXX4xEtRADJbXVyhcVfQBlzUJoyePz0FqDLOC2.G4bobQ.1RM2pau9fzHEfIJ4MjjYClC2GY0.IDQJ6anQ1aC2dG.OX8FBY8k50B7q21.arsAdx1F3oaafM21.ex1F3Yu6.M+dh1wZYPxDNDZ3ndVRniSOg4wx1KmP+Cf1ouMo

Orvillain

@Christoph-Hart Right! That is really cool! I'll dig into this when I get some chance and see how I can leverage this kind of system for my thing.

Orvillain

@Christoph-Hart I think this is going to be amazing. Been looking at the snippet, and it mostly makes sense. Being able to throw data from a custom node to the UI is exactly what I want to do.

So ultimately, consider the title of this thread to be null and void - custom node is where it is at! I've just got to port my HISEscript over to c++ and start properly learning scriptnode.

What is the process for writing my own module (not scriptnode)

[Free dsp] C++ FFT

8

1.6k

11.5k

99.8k