How to use KeySwitch to trigger sampling?

[d.healey]

What does the key switch do? Is it to change the sample that you hear or something else?

[CatABC]

@d-healey To change the sample you hear

[d.healey]

@CatABC In that case you need to trigger both samples together (probably in two samplers) and use the key switch to control the volume so that you only hear one at a time.

[CatABC]

@d-healey Thanks, I'll give it a try.

[CatABC]

@d-healey I tried this, but when I switch to the second Sampler, the sample does not start playing from the beginning. What do I need to do to make the sample I switch to play from the beginning?

[Chazrox]

@CatABC are you trying to achieve a mix fader effect between two samplers triggered by a midi event?

[d.healey]

@CatABC said in How to use KeySwitch to trigger sampling?:

but when I switch to the second Sampler, the sample does not start playing from the beginning.

You don't need to switch samplers. Both samplers are active at the same time. The keyswitch changes the volume of the samplers so you only hear one at a time.

[CatABC]

@Chazrox Ah, I don't quite understand what you mean. I'm making a bowed string instrument and I want to be able to use KeySwitch to transition between multiple articulations on a single MIDI note.

[d.healey]

@CatABC Do you want each articulation to start from the beginning of the sample with a fresh attack?

[CatABC]

@d-healey Yes, I mean when I switch to the second articulation, the sample of the second articulation does not start playing from the beginning

[CatABC]

@d-healey Yes, I want each articulation to start from 0

[d.healey]

@CatABC said in How to use KeySwitch to trigger sampling?:

the sample of the second articulation does not start playing from the beginning

@CatABC said in How to use KeySwitch to trigger sampling?:

@d-healey Yes, I want each articulation to start from 0

lol make up your mind.

[CatABC]

@d-healey
Can I set it, set it to 0 in onNoteOn, but I don't know how

[d.healey]

@CatABC When they press the keyswitch you need to turn off the old note and play a new note. The stuff I said about changing volume doesn't apply if you want the samples to start from the beginning.

[dannytaurus]

@d-healey said in How to use KeySwitch to trigger sampling?:

@CatABC said in How to use KeySwitch to trigger sampling?:

the sample of the second articulation does not start playing from the beginning

@CatABC said in How to use KeySwitch to trigger sampling?:

@d-healey Yes, I want each articulation to start from 0

lol make up your mind.

@d-healey You may have misunderstood. I think these are 2 separate things. The first is what happens when the OP tried your method, which is not what they're after. The second is the result he's actually trying to get.

[dannytaurus]

Your requirements aren't very clear.

I understand you want the original sample to play when the note is played, then when the key switch is activated you want the second sample to play from the beginning.

But what do you want to happen when the key switch is released?

Do you want the original sample to [1] no longer play (meaning the second sample cuts it off) (I just read in your original post you want "continue to play the sound of the original key position"), [2] the original sample continues to play form wherever it would be without the key switch interaction, or [3] the original sample plays again from the start?

[CatABC]

@dannytaurus Thanks for paying attention to my question. I am still working on it. I will break down my logic:

1. I mapped KeySwitch to C0-B0, default key position (such as C0 Sustain)
2. Write a note C3 in the MIDI track
3. Start playing C3 of Sustain
4. The C3 note continues, and I write a KeySwitch on D0 (D0 is Tremolo)
5. The sample of Sustain fades out, and the sample of Tremolo enters
6. All MIDI ends, and the KeySwitch stays at Tremolo of D0. When there is no new KeySwitch trigger, the notes written afterwards are all "Tremolo"

[ulrik]

@CatABC if I understand you right, you want to fade between several sound sources.

This snippet will show you one way to do it, however keeping several sound sources activated will produce 3 voices when pressing just 1 key (one is sounding, the other 2 has a gain of -100dB)
I don't know if it will give you any problem doing that, I suppose it depends on how demanding you project is on the cpu?

HiseSnippet 2419.3oc6a01aSjjDdljLrXytHX0dZWcepk08AmEiW+Rdc41EGRbfHHIdwA3PHDamYZa2Ji6dtYZmPNDRmteY7o6y2Og6mv9OfqptmwdlDmPHh2OGgbltppqt5ppt5mZhoUnzkEEICsryuygALK6u1o8gBUuU6Q4BqMVyx9pN2kcXzAbkaORGpGKx5VGFPihXdV11SeaTL6byXo+4Ot4sn9TgKaDIKqGJ4tr6w6yUin1pwc499qCpaGd+TROWiMbkhUk9xAfIMsSEq.p6dztrsnnXS4XcGZTOK6ezY9Z0cmyaQuZ0le4EboKvVtCsSmp08latEVZ4p0WlN2RKvpLuk8EZ5wUxv1JpBLd6Ytkz6v18jGHLKvC4Q7c8Y3fpVsgU1PdcouGtEQpVq1i660JwWEYYY6zZjmaZim66b1j6wGRejG7JZFjQyHsCzdprl2zYLupoMuJoLuwXR1oLoYLlzUcZ6FxCTi3f1ykb1PnXgcnPbJsoXj0x9UNqJAADpx8o6wVODFLbBEWnRkRjZUpL6M5LP3p3RAQJ1RpXaKJNa9WjOW9WlmbTVc5LVd3xDJ88YgikMlZDdZSrnXP+cYgkH6S8GvFJHr8y5ScNYeZ5PtqYWmRPoXCAWsc.SbRIBVwtJ3oGrwZTEECDwz.4BXgJNZB1qw1GNFXBK4bViEsmRF.YzqJ6GHEnFryqzb+l3f18n6x7s3Pn4xooT054oOccX5AGv8T8FR3U+qF8X7t8Rct6wMTrmCi2xY8UVqI4VM24QMatEoNo81OXq0vOu+pMaSN0eFDwEcIPQARacUAX60A1vs4+iTGj+0F8G3q39bAPzdJFDOnZWt8zVo1xesJ9niYCttujp.suCGDE24+owv3Dc.M98FuIGv+72ZDGbLQh7XwsckzPOqc6lT1I2E777dMJNWw5Oh5qe8q+yYoVKlrVXzyNR3DySmSL0SscdQdBo.rZOBMwB+Lo5bkqTBosFOJvmd31tJ59rszYz.6NT+Hll+8jG.SCHsrd3c3lQUqsnd7pChTx92NjFzi6FkYlqw5PgnvJAALZHVVF3pBGXXdKenxJnp6CNVIvnR4EVV+yRKUYwkqrXUsT6H610msozikQyXAMn.mPv7QSQS6AQrGxbgicorkgqFvbcepps5P+inoVMSBAGkNb7MTMZUpkPuovK0ZuP9WB2mbrRePQWo2.XIyVIFuuJlATJIS4OrFmHhqNL88YuyJOeVMwq5zBOTMdabpwXiPAm2G1X7kZeiSyNcfn5HCbFm0+auetAK8xewS.MxO3zVNP3AeDBhRvCy.KV36BPIAmYPI1S+9.SwW8YLlhqXhKQ53B4tsGGvho92ekC3HiTj.g+yT3s6jegjf0f540hBmoKVXH2BkH.XC.pQ9gjJGwTEKruYC.70EL.Ax+S+TNEbUDiPCYD3IhaB3BORWvqEk2rzXtQDrrOQmXUtKSYRvKVnMuefOSKP0ByVJetb4fa6NMwpc1DqdgYepwB2KAIMKpj1H6vCAahGQn.zl8AiWQhvpdFklOj0krGZsun.NUnb2SlaoRj4Aux70dZIRAyzP55Jsw0OM+5ouDVz7cjgjhbPEUtAgS9ql8eYelnqpGP4ZWSCah2gTbunxF08D9SmE1VZIgmQW9JJUHe2AJVwgTwGLAmbLX0NqS35UQri.LMzeD.jTZGArKwcnwqD6L.2ROJ3ZHdLF.jBhn3Iv7bAhpXDbPsRvdTLPEO5FF1VnlytkykqonKnEzTgoZNaWLVTvXKQLjhJCgqdq3GziVLgRHyqDIsyhbS3xyEI3Un0m0r2RYSCyMIlLdUOHHqajhrKSc.iIRumivSQDkTSS.HJxvH64.M93Uo996B2jWLweX7B6SCIBYXevOrIExL6DJ6WYGY0hpd7nxd.njxtfFUkfTq9bAjAgAFHipO84E9Y8CbOOeVKIbaCnUTfkdIFrGo.ucSzN.tnKqHpAx0HE0q6ORv.coX0pSSxGmgLRCRwXSVxJfIuoHnmqmdsm855tPFiR6z4MoUTBiZynQHToOIbDeD4W+ER0xUvrFMG.uUPbuI3LNpzWCR8JWCRChC8XrVWBZXJ6wRgQQzFYQvzJAM3nigixwPCF705i02HCCARGO6q8uiROR1m.W3yabbVBji33LL6A7zSZV5hRl8bcsSOSBNjvCEZFe6f9RWpOQfK2lv0EPq7XURTBCT2hlLCvOAUEc2i.9+fPFdyAVPPWZT+P7afPho0pgErzmrcMf.hJJDyBAIXQykrT7tPxHq49vELEQuDtXwlDVhHQCbgG64a2AU.J.7uiUPDsvz1Vj1z7CYTuCiOiVhDxTCBE3UBlmhUFVeDmO9airv8xwmvO.TENgQo.CW1glk1xKQ3nw8xI8W+1zescplMcx1esFsgtKyK4LLSG6szwNtuRyC6mraLCmzqwWZ8ZbYyxeIm1PQYMPN8he4zsZT8TZv3+7tuACyKCXG3d0n.YTFE2l0muCjQGklH1dcH6uq6kOM8Ug9pGKq+3lqCa1wNm1TnzkNcXk93kAYB+mZiOUOmM9LymbM97Yvg7L8lkKwFMsczTrOyGJNpswu0I98.kPMat7lRgLnmTvcSGnuOC.O0sKKLssO1MD.yBfeNhx2039LeFMcR6eow8fjMZH9ZjNm9hpu08oN130O3XLWBd.j74aw4o+ht3blv4n2DjN091IK+kcR2v9oTd1xZMlOMii5QYdMwVOtwXJfuAbZIT0R5SCOpad52UosyblyEvszm14qXYFvM+otQpC8eZajWwAfl9QxDuub.92YA5pOjiPgglzL.fhei6HZe6oPjElwURfE2lI7zCv+bHwLqhisiYVMg4Gj03sDdWsIv6z4QSf284O7tZSf2MAd2WVv6NsxyO9USf2MAd2D3c++J7tuOAd2i.HUm.7t5eTg2Ucr36xP8Hyn1XmQsr8zpFHxpZCoLRg9j0kg8SI2EajPrVZhPNYFkAiynoM4o9VW8euYSA904pMC14daG4BNFLIOcRaqA9QL8wwpom3Hx0RS9NzPOH3499+kMdgInQ+PhFs9DznSPi9kEZz5SPiNAM5DznedfF8L6F..NeZGo9dG.nUMhtPM4iSk5uTZe3CwZzm5FJeV72BUr96E0T.eqP++kobNahiIUsze6ZRGv5CfNelqaVUcrIV67Nw5m2IN24chyedm3Bm2It34chK8lmH1SvJCTx9lyePuQsZp+pIYaaZKReTz5+ATu7FKB

[d.healey]

@ulrik said in How to use KeySwitch to trigger sampling?:

if I understand you right, you want to fade between several sound sources.

Make the Gain knob smooth the gain?

hey guys, i want to make the value of this knob smoothly gain from -100 to 0 (-100, -99, -98...-2,-1,0) instead of going directly from -100 to 0, how should ...

Forum (forum.hise.audio)

[CatABC]

@ulrik Thanks for the help. I implemented this function using a timer loop, but I think the CPU pressure will be very high.