Clockramp not reliably running.

lalalandsynth

I am using 4 clockramps in scriptnode, if I load another xml save all clocks stop working and I have to shut down HISE and reopen.

Also, and a bit worse is the fact that one of the clockramps will not run no matter what I do.
I have had this before but managed to get it running by closing and reopening , or loading an older xml , but as it stands I cannot get one of them running .

Even removing the ramp and inserting a new does not help.
Adding a new modchain and clockramp does not help either.

If I export as plugin while its not running it will not run in the plugin.

When I get them all running and export as plugin it seems fine but I have yet to determine if they run reliably the time as a plugin or if they sometimes drop out there as well.

Christoph Hart

Are you using the internal clock?

lalalandsynth

@Christoph-Hart Yes, its set to run even though the DAW is stopped.

 // Create a transport handler
 const var transportHandler = Engine.createTransportHandler();
 
 // The grid callback needs to be enabled for the LFO
 // to sync itself to the clock.
 transportHandler.setEnableGrid(true, 8);
 
 // The clock will now prefer the external clock source. This
 // means that as long as the external clock isn't running
 // (the DAW playback is stopped) it will use the internal clock
 // and as soon as the DAW playback is started it will resync
 // itself to match the DAW position
 transportHandler.setSyncMode(transportHandler.PreferExternal);
 
 // Start the internal clock. This will cause the LFO to run
 // even if the DAW playback is stopped. (if you omit this line
 // the LFO will not move unless the DAW playback is started).
 transportHandler.startInternalClock(0);

lalalandsynth

@Christoph-Hart Can I provide any more info or can you reproduce this on your end ?

lalalandsynth

@Christoph-Hart
Now this flipped , the previous one that didnt work started working and all other stopped. I am now dead in the water :)

Leftmost clockramp hasnt worked for a couple of weeks?
Did not really change anything , was just connecting a few knobs ?

Is there anything I can do to get these running again ?

Not working clock ramps.png

lalalandsynth

Anyone have any experiences with this ? I am practically at a dead end unless I can get these clocks running ?

Matt_SF

@lalalandsynth I happened to face not-running nodes here and there. What happens if you delete only these ramp nodes and add new ones?

lalalandsynth

@Matt_SF That has not helped so far, even tried making a new split container and building the whole thing again.

Christoph Hart

@lalalandsynth a minimal snippet that reproduces the issue would be helpful as always.

lalalandsynth

@Christoph-Hart that is a bit hard as I cannot control when it stops working?
I can of course send you what I am working on as a snippet ?

Here is a snippet with One modchain, one that is not working.

HiseSnippet 7198.3oc6cs0baibkFTRPVTVVVNiyscSpEQUtPG6PS.RQJtyNqoDkjshkL4HJ6Y7LUhLHAnDFABPC.RYMYcJ+Pp8gT0VadbeL+A1p1G1e.t1eA4w8wY+GjW1m28zcCPz3FI.IksrGqjQVnub5y46b5Se5Fc2ntgdKYSScClToO77txLoVhsw4ZVmT8DQEMlc2hI0OlsZCt5p8NVQiK+Q44ZHa0qK2oZ5MM4Jxr44cEMMkkXRkZ16ipRpzywf+4uduMEUE0ZI6lDCySzUZIumRGEK2TqW4gJpp6HJIenRGpRWnxtsz0ppqp2CXuYYywzUr0ohGK+HQTwlgkI07aKoXoazvRzR1jI0bapKcdiSzOSiT9mnXpzTUF8.OSCfPjj2QWUBwwnTYpdhhpTcGXvjgIEacWPYVBnbS18UjTFjtK3rBNCN2ZPiGolwK6MqG1iml8xQwdgvRonXo4HrzMXazxPoqkaNH94pr6pYIazVDfcZVgTVlY92RyxwwUUGJjlU1NhmJuiA7vfJko7Z4tC2Z7qeqOdwEUzZo1SRNypaZnKJ0RzDJT1uxbUHuAYssVeYU8txb6swNj7.56lccCYSYKvlQUtkkhtl+p23LEqVmTWTSV0zed02S2ZPKRk9AxlJes7i20t7KBFIlVb8EM3NQ43SNBZQtOYfHdrrUU8Nc00fGxrpSAv0ythcD0fxusFXeKiJ98U0aJpdfdOKEsi2WTCL3Lx.kG0.lp5VGIBEGpDlzhf9KypjjOBvmtckMVktvMCuvMoKLtzp.7tutDT7beLcB6a1LPZ64j1fD2zvxaofDBTSHM2ZtHtadVSKQCKT+NiL4xlKGRuCPmotpb1tFJ.lYYfLKza9UYsP7eccHwaAk5t28mv8IQ8C2N.7CsgMppBlOnT1vLyp+t5GT6Wuc0COZmZ6s01G7xGqozW1vrp1AGm0xp8p2ga0pUqhfE6Ja5nRPTHiSlKFtB9PDOxu5sP0pglX2mHp1S1LyhoS+kv+kFDw6vkKqvZnei+UI327YyAY9aVLMkUAByHcZ14y4AHifVPigagAc5.KXbg3fRQLpPcaTA9lqcOMrIOmt1l8rrz0JgXYCc0Lsb326.MCve2Zwe2hou6c8h6CW9PMU5KHHH.qrpIPFjzkVUuknJGmngABRbfmAvRF9a4BQHCEyML2vvP77LgQVhkEPKPZRu3KiTmZidDIxFCqJpp1DFMHievEZHJf+Q5Vx0zxfA38AEFzWFHhlzg5H2105YgXrWtHm+pztchpicaqhbTPWMIYUwy2tORJb8urGLXfVqyaH1oqJnWHpxX1PjNp31.YfpIeFwkAwADh5Xscla8K4EJAPtR6L1k4m7INNOtEGT6zttaHE.JLljcLaRRtqngoLLtfMA.UTZnH.AsKgKAA+LDZl1iKKR4PzMMoyinjDEPwCFc2wtPfU3svELfkWGnkfxvsJ2sQ+KtTuzlQbblSI117A1gW.AwAJ9U1s5s39kb.LQZYfdp9Er8FHXo833U0UxhRzxm+N1ECDSRKDtvoZKbpHgCIXoe4h3+C9+CTxDu6jANhRIiJiMqC+oqRlTWRAnTx9zvnpPqgoHkW06fwUfBMLcq.V2B+aDJ1l.aAEXUhPGaUpe8IR5v5yPTlTxfOM4fABUsEhHUiEvpQ3OhRGhjC0AxAkxC.yPcRjQqWmlxFzt9QEDhqyavhrQGrHcrrsHtLoJnt1tZJV05JqEUDtL19Yg.K+Gr4Jn4svgUdM6vJw9vYTjPg3ZhS4ntnnzNhmAy3zA0KIZIxj5wrEyk06O8q806TTtb6xOrcop3TjKV9w2Ne4GjG+b+Z6tw5ewsQYTl7L7q1jmUZK1uWMBuNbFbAVxPdukYruiMi0PUQR1nNL3Dl69n.IGfQWsBgQ+X1B4x9qat9CJq8T0mV576us0KpU7SO9g2teNkMK0n45ZXFI6sK8oG+7hJOGJPsie98Osb1DfSBQgSayVX8.3TiGsQ+xe0W77uxFW52Tq5sqyu+mVJ.tnrQeqIAWBvXYswkujsXAZlZuy267ZG.B9saCPvZMfGaVCANkev1VRkZT6W2zrld+bUu8mq9T0RJGlesypA+0t2tNTo0U17ypway3Tr6rD1cYa9hDVAlUuAaaEUXlHPH9MIo5iQ+q2KQjoYDjgIZtgfRXxbcOIUZZPj0Sf.EIQJOdbxJdRhO2TgJ7SEpHj.pPomutmjVaZPjhSCsrWPox+yW+GFCsb.L4GTI4DI+zPbJLMHxZSChTbZnhyOMHRgohce9oBUBvK+zJiAUVapvKEmJTozTgJqOMTzklFDY8oh7LU76KLU76KLU76KHLUnxToWjPgoght73QjU7jz3Nz7xrcwKBrcRiEmrH6IPkQSxIF02gsqp2oo9l5uvlKfYa2PVEmHeLh2YzTQX7BCb4AxxWnq2Y.MlOI3QZVachS0YSkzpJL9UM+3W0BieUWa7fampO1CRu4QfB+He3cxHx20Mxe015IO5eJR8CcIk8aPXhH2xraPIdSnzINDoKdJqenKolFRmituz3503in3G7qvROnCrJIjTMijTwCiP9BIqRVHR0i2cKzTlYRkxdMdpanCnnkBZIkRskbekVxj2eXZ1sjMO0RuKSpe1fEaGnt2UO.+l4rGLX.TfWHHlW31vOrx4tOToxYJRVmLHgL+wJmHCbr6a78YxUZdry60cQV9hk3E3KWfQwRti2j4KtdNpjE7jtk7KrBo3olgRbVJJw4ZrHaU9fxBCy4zO71UV5JZ.hAk7DPKz2YYASMap4iVvGxx4EorGG8XWmkUbWI7VGXvKCiwEUVhsfPY9xfHAQySiKKwles0WqD+5kfob3AYPUQnz544EJudPPvqtqmo7i0jzseSsNq4oaoWvKRraGnX199nRIOMN7Wu2PrA3BfCU.bX37Hnzr20B+sr9eAn2+fc2Je1tZG6gquZTFtKSmhPrsbqDfq+yijqoUg74xUbshkJHTvmJr.nm3KmKmeiaTNPF4KUt35AMuKUR.LF9Vs.+toc4RibU3ee2exUhxP8FrNwrLUFVYz99QCxOH2kS7agXxTT94tfRez5RSXxO3WuWs9xFphmSdUV96lUlWnPwhqER2rAc.o6lklkuPgREJTjxTIMawB4KrdwBiTqd0QF2SyK4w8PGI.cHPWa3g.ILMrUihUiPxBEEhPrDUU0OyY6dXhzGUUUf+h6my8.cv7goqd2dcqoc.hmvY4rWAip6iihL0bwAk7L7C+ExvOBAF9IBHLlC9LtP1I5pR6Z5OUlnQoPd2huY79W.7MjSn7Tz6uiN.uI21USR9EDeDixuQ5XMJtWb40IxtoxHsah2n3xZHQSJnRMcTl9Kvh+60l.i9Qy78o2DrizxcHAPE1.wBWrCD2LjIgQOl7JI9MfeQMlrvkwwjcE7QzgCQRze8KiWWu4Y2Gs+riqR++3ewOVl6UULaIpRszJey8b6j8iCzI6wJb6nXsVr5lEq8WfKqWoNULFbm5yLf499YcledECQIE86an2qK8LGflnioEzxDbJ0pAjhcvLwFMPEBKJXLXGQ7RUQgDITnZFTndl3PEpcBHTYlPgZyDITQtnQej8DEvG9gftVdDkT8pm6Spd1KBDPfRkQ5uyWHAjYQR2ozamTARBQL6SZ2TKPIuWO160DJgsDcruq4WE9P+B6qdTE+Jq+t.JqGB3pqlRqWG7Cltj8YUhP8Mv6UcTnMvjzX2TFfVlN5RxnSEwgxfz13bsVLcDoDBgJHGjMT9ZOqBaGEIIzFX1TAs08n2mVA7vFlEAsozMh8NvgpK+u8REzFDBSBl8SGRPc.ZBNTgtm6hmMxi6JIZIygaOOZobwC2638zGwLFV3kocRcJsZnvkC0vhraoX1x..sDoE9l6ESsvBnS+UKX3qDaoe83uCubw3Wa9sPLlkcCow.fWN9a9snbSezkU2zwBLhI7dcD7xYoyYpbrlnZn5vwxvUHRezG8sCCWutnSrA7Ui8NlzEmekGmvegebd2.QJ1nRR8z4Wu7SBnWNPVhyDePEEhHDxW8e8+9eeuKL.oHEf7Wn8X95mlX.YE181oF295R8TEA9OuWPgdT92d3xhCO9agHh+9Y+9gE+82DH96moTYpFdsmXpuVr2TtTNq+GuTMZXTNqC02h2npiPkKDoJekXu8icaGtm89abxipa5NFxOuG5XD5MR4st3Pd5WD4yTuDF116sHeA53Nr9.xO4H+xw9zAP0N26c4HoEFmHoWg0ritt0IMHKhLuGbux+ZkwwXtXjNvO5CFyikw7Ui8ALgJrZ02WhhbxwEZ2q0ocu9p2OwkHit96SsCNlZqv8EWD12H9Gmo24V15X5fdYGMF+AvzxuvWr6nLPXFGsRgu0uh2Wef1CM.qoWkUk3C+i05dG3X18gE9NhE9NNV8WO9GDwOr32RiIHuR7Omlu6u.3QAHwDlSyVsmAhjd8pvTIVZ4wB0W+x9xieoKx93Xze0XeffmdKZ9kgnXmlXy5ums94I.aFVT9WVWG8n1lJWK9mH8uUrl5QoIGGu2B49vBqO1dumBvO+GVc82lvuvGVh8K.3+pw+px3c+0YepZOV3CqR9Eu83PttTd+ZkxmLrIvs.y6WKWdb.mHWx7uKK4BNug8M5PcegR+m5S22cEe.zqUC.PklxKXNaz6U+nuhdb4+UrnOqRq7ZeJ3mFf+eZvdlgiQdNlDdNCPwyp7FrjSUvFFF5msmbaKJt9OeLMpufeyxBA35BwkqUL2WuCjunw4jSlhoXe4c0HEkv99sT+YArTaJBFoGA0oehNUBQiEeGZr.e78nG93qRHXH7V.LdDX9NNfgSOx8DaN3PsRLkIoPMlwmTYHGmpW2b7sIjkTvGZP2NhDznstlE4.CwxVsZU7ydGlrTkPbxDh9cIV8txN35KnUlWPl4iuhbKEySmDEI84tkiv.98oBCqbN8z688RHCbv3x8xKnkm.UlvtrYtosrriptH5aHwgJpNGIThDclhlDDBYbOeZmDPj9l+oJ1WuOj6xmqaS3Mg9+ldN0P3SlW4R4xmmubvCyWgxEKITdsfGlOHmb7kJliAeaBMy+7Lr+tE43VEcok0.rMH1lq92yYYzS9NN4r8KfQNMgv8L2vDnVuNnRzVT0zsH3u7JFCpt2LQ279lAREcqXSpfIcC5lbs1sAQGxiO2fJsgjT373Av3Nchf+2B5CXEQd6H1W2.fIzWjF57r4rcA4VRdScCP57HAOpWGBTfX973jHO+YHU7Af8gNjwWBoywkKade+bmDlNj7uA2F6oXZsggr3.rwtEtSX+yfZQ3rCzOqtnjDX3F250PVzn0IaJZrodOMIjj9kjL1W2vFO8miqUj+bbP5.4t3KCNoKeNIFRLatmNzqZOBwlmdbr6BVOPWvUdYkQwMtmXzed.ukjxsCJZ2FcDUUccWR6nbLNKoT2ThTShoGsKyeznGoHefoP9KhvgO4iwyHc4GHVgP1NdQ5275rzI4YGSqQePRM7KXZANN5Oyqiyzr0Uwejg75U2Ct65L0+AhdjiZfdF6AM0mRbfV2c1OfM8pdl8C+pX6e7QgFxj3LCbXppe1moabpYWwVxN9Vf9Bw5JowykWQgXatGZf8QFjd53esaRsJazgkVoakQx.EpfWB.1Ty.OfPcSjgAff7K13vsqWe6C3YlbVzyIv+O7ljEuRbuvPcYvtd5Vey3D.XblGMpC8gFvP4At7mVH5ntIUyeT2PWxgwgaEBGRBfddV90x8y7EacrNi1W2lUPWA.00TmfaAfJuZ5F3n+C680bNr20zTOOx6PhHEzqxhlMg+niel4vhNNDi1eavww7CgWXucu4CZaMzK61WPuPhCy+0gwYtOz.XXWu.KTgIQ7mPj7WfWhvaE9Kej72VWJ3uBQxeO5RA+sVj72gWJ3uhQxeO8M.+ckXeEJSsPc+9gMB6q9xP3xQM9YXWyYjl2umx+7P2lCgz36VI5o9uPBu6mmHOYgqLB4dVhVvimsTzWuzSjusIliuRbuAqohvrWhMtlrniRG88QEgEwimln6ipfAk7mdUkgGGQzKrtmvJFR2kMBs6hG3LdcWB49nxOPDuI0F9MLtKu8Mz712zcbsHYpD8r.iGiF88WdDLaNiKZlctXb6nSokoCe7YJUh6jnB6hRmxHWwaWwfSS56wt8idx16Uq91ba3LYItMrWM8EY2Y28NDmPL5DmXVtYnr7eHRVNXSFTH1bfProsPLCavIYGO8D0E9N0qd8LJ96u76qLjgBcml1xzoPOP7qdxP6.sajySaA1p8rza2lI4sOc3xup8X29azQuG5SYXhaeOmGtmO1seC7QjbLZe5vce8YiY6OO5V7ebj90hR6CrRBZc74NJ4sdwnz8Io0uB6CTPcJRdyWJJUeRZ9EfYICwJb7Xz9qGkpOIs+UwmXk611PFz.A+9vuB6fUVj9yU+8g+zNCzFyg9aDO5i.uloh04zajmo12v93xh2fsNZSbDNONSH7HCyEBON6g1Zxsa2FFbvkAmicmO2CtM0Z9TonZ+qPZ+EcVT7OG23dNwGzLwi50AeC7h9xwlZVzbl60w890zzYrKH0sTL6pJd9l8.4x.mA5SwCgrLy7uOKK2cuKWUCYzE8iHmEJT2t5FVbmHpIoJarHm6GH8AY9.RdbeBm8245V35enu7QePq4VDQ+COQl6XCEItV1wwxoIKKYht1lZJyYGLCWacnMfRt2N0v0BcoNA17bJVvH1sQOhxskpdqSytX.tA84BeaLktOzRYvuyNt08vB3pxclhpJml9YbcMjALASTnKlrglnpcQL06YzRNKTIESbs6HCMFTRQKNQSNUcsiQ+aH0TwT6WXwYzSSSQ6XbUyfJ0Va7YbH0.V1UL4LszgvEktEHaD9omoLlbJZzjCS.P7PMlottlSiFjbhFV.B5PMvOI.b3Z6BdcPuAG2pauY8BGHQ9Zf9jxYBjYcLnsssTO.daf3fPj.BFR3pVhNRI5Mg.bD.S3JK2WViSoM2PPprbYfBbtdON8NJnFBxREL8HFJ1jzVyZw0QuuLWOMn+wPwqaEpYDJucsEhpHYHSta8wC9xNCFMnI5bndcfdYLweV2QCKdGtlnxhVCkAekmopDti9lXp0B5ZASFxLXwF8WM54isuG9g656.8dn2v19hvXZnPcQ9OvF8Us4NGWH1Omy4a3UCYMI7C+evO1YxOvsBjIuSlte2oYdjr0YnWpExom8eCxBxC2MYq2y7DfS.0jrVeYUcvM3S.OU38Q5UXykE9eLafmCLLtqh8fDfKPbZ00UOu6I5ZJsPIQJgiHXGpnsb7.QyCEUPeEElI0LOBuqVmm7hKOutHZH3avh93ZCt8AafVCb+GJ+45IF6i+DzqP2dmLZRvdTC3rZ3DbC3sN3XFfYF.9ug7QngMmvRb12V4EqeD1LhwCq88nXMpx3kMhaSlhpIuBKL3fhESj.AI6IugtJ5stgQUAuM1MoZLmhLls2xTs20XwdeNBzJcEBJdFvPVCxOYM2btgpbnnwwxVl1e9szjaQLMw5TxI9VQqaOqirzO9XzKxtt2SfLdela+pwUkegyWxKeCX6OE3Y6qO64X+UPsor7.9cvSveuuh1Sr+56g5Fwru3KreddV90gDZLXmbyxxCOSrHv6BWlMf44ACXP.E5lAg.TDl2OgKFAgWhc+dpVJf8D5dcOJx4kOI0NLpcMz4J9P8Fj67Ql3I1QStkrupCQC4MLQenDWHBhuH6tZfAnRevwFccYn9Xswv3wQfERGbDZL7v5s.CPjkpDIq2R7MemmE26viU6Rr0kMTzkNToirOau4dSX6wN41ddp9Da4jlca6khabn6Bnu6T47P5aBEAkH5Gdz9xiuHOtkVl8wZl3Ks.L3aSgOhMO+ZYKhJcgR4DVOWw0h1vxVi5wj5pD2gu0cDJLUcDNa33enf63oN7zSHtdKCyphL73d55cwwP62GQBoz7vT9sj8aLFg8vBvnjxhFE8ZQrDKHJmjEmUxLIlwiNHUR48qPrDhoWR+FUgDwDxQIcgRnqx3XQEeOEWAFF.XkI1VYPfCSIBIDfPwui8RrsPN+NpK5ibhmd0N5xHUeKyhpDZYtAbxHJsmmxjL2S97lPu5HddjAsLS1eORxwrMLuKIIYIx93aa1BqmE9o8sQ+tbU3W4qkzm84ZJUbGNKuPjCmMX0dLCZEPi2gnI8FnAk5Kh.MnJwEE9mhB+YlNtPFeS5uq8sfnrzQCNdZBIz1NbZ3Af+QC.3fEMoton3B7ZJhd5bjYMd7.bLs1.00X2CloknA2Ang6idHyIBquvG5851uEF7NDty3GvdRioKIgNKJIwGgUim.xvkyikwhjgegLdqL36P8mXutIDPh7p.8YWuBaWC8uB.jr1uoPuxvNF5esrVrVij2nASLOamdp4CUQ.Y71MJngFB2UX6JKdJenwzixYxbZOAgfyjjoGbrpdSQ0iZQ9nBlLms9qsuHILHKzYV5BMDPA+kULeY9b4EDRhe1kXoDMaU2Jrlp5VtaNj2fCtERT9Bu6DkuG6nQ.66Z9DTtsDUcnXpYhl.SNo8z2ifduShqo99zCSRVmJ015jqVzgtJKk8LrI90NPWV5N4dZTOMCZAYXRvh4LdMiP.oIWBjFgX2LAjlbIPZxEilw2U+5H0OQDiCpc80Tn80ZH9j8t.597HSVlNlHlRH0RSFd8nsr8JbwCGSDx4+ZWcjy3ZvSBiF6Be7LeSs02BnRM2s.L62g5pd6PxRVLpt91O3tENFGNdnKPmyBWDsdaT1+d3zDp1DRpZKjtZCowli3pmLIr8.GSLwX0Ziqj3m3BIh37wf3Aty9mPte7mTr+IkMJVUXpYuLKwOLDmGxDVbjzcTldKwhrCrm9R7m+37n74SpUt2OdYwu0R7HHd+ZdM8ZnHrXFx3GddYaALS9HVGa4A1SSWKEHTqIvBYNxx06lRr4M9X4qnta2qKJJmeBo7XDz7l55m1QDuAPXd7tNytzd+gPQPX9kx8UZI6bbs2R17TK8td1odKPx7ug893Yz4tmBc1GA3ng+w1Y6dfq4FT.uakNzVjzc7y+x81TTUTqkL8NN7I5.OsmRGEp8kY2JOTQUcGQIYr6Np8qI5Rif9nRlZVuaZm4h2l1Ae4Y3LEufadv4Bt4EuI69JRJCRmdefhxfysFW76mQ6874MbNvICxwdA7j0jNTGwU05Y4gcr2Yho9OYo2WTnKKjZZYBaKSgypc6LCY6Tg2Khnr2G3AwikyZR27nson2pgznFYFm8m0bdwR13opaQ5HPUPcsc0Trp00YsxBYGb4t6plzdTCa+49QA5GY9FbWD6wjZEBaxhNh81l0duQEFMisoRWcUQz5VMq6cMH0QTC0cdWM5O5QelXe415FcrwO6R9Cprm7wPaRSa2auNJOGdiIh5nwideuNqxLEQpehnoL4ZbwCY.xB1qhPLwF3sjHclU6YZo2wgQwCvgFBk7Fr9R1hEl32fU3OmjMh8v2MholI1ViHM9.UKR2eIbOsS3xAFXWR4xgty6m885cd+ajc+5ah1niXKC8ireShnNRKfSAjaM7MQTZ18QOywyzmNduNv.eG0pkyx1GdcDFi5jeLpSgwnNqMF0o3XTmRiQcVen0AEyg852i5xAITeahm5TCFNH0rL++.Kk8a0.

lalalandsynth

This post is deleted!

modularsamples

@lalalandsynth Clock ramp doesn't seem to produce a ramp at all here, the closest it gets to a signal is a gate that gets triggered by the "Inactive" control.

No doubt I'm missing something, but why not just use a standard ramp and link it to a tempo sync node?

lalalandsynth

@modularsamples because the clock ramp can follow playhead, while you have to start on a bar with the temposynced one.

lalalandsynth

@Christoph-Hart Here is a snippet , that will work when imported first.
Then without closing HISE, import again and it will not run.

HiseSnippet 1431.3oc6X81SabCF+NfiNRoZqR6Cfe2BRrTRWGqRUSqPfzFsBMpIk02UY78jDq3y9jsOfro8UaZej12fsGe9B2kPBhkt09lFPvY+7ueO+09RWshAFiRGDtU+IoPP31Q8lHsiZMhxkAcNJH79QLghM1BFavgSRoFCDGDFt9KbLDt0FA4e9qe5PpfJYP4VAAmo3L3U7Dtsb2tO+m4BQaZLzmmTg6m77NLkrkRnxPvrdzdAoT1X5P3Tpis0hBB273XtUo6YoHXBB23PU7jdiTWJ87eF2vOW.tEMC5gJxucakH1gX2tAsFwEwcm5zl.TKcKCAq6CAeczI7X906WFJ9pbBjRIpFOBWaV3s9LvqYU3sWE3s.HEVARa3gzCi5wz7TaIEepoizB5ATLrWEJddCB+ynVJjAosQBcLzViKtVf56u2d6Rv+ryyFjIYVtRRTxSUV30x56T62psUseuFYdRCFrPZNynUBAnWHYWlVeaBVWlkbNn2kbAUjAWyH59yFSiVdLsZJm485JLpjcjb6qSA4xJDBJBU3SusyQTK0kHJ1C4KEzVtCBgGAWfU09zxVQGAlwVUJVWeibFVsnhyDT6rkPt9lBBXLXl7lK4HMb6jp8U+mUWcWg3Ci5xsrQKFiqs.LhQp+OvXQ23ChNdv.fYKA3FQse2GuVuZEsdnMcFe6hkj1uq4hZ5V6OVOh7nGQZoADLDJwpoRSpRaIinxXrEoFgfEnFKVrqKo9ROQxORNVNjKgFrbEzeN5024Yn73unI5OBHC07XBiJDmiSKIR.hMDqhbNP.IE84Xx.EZEjyW090dwPxlIRFgaMfXfaoib9P9FHGyinFFvdbttdAZq5VcFrK4oyAiboIWhS1IR0kjTML.7lEtBG3HohBVL33cFz.Eha7hm.n8PVoVB0PDJ4P2+Wfnbi7arDclTxkC8xV2w1QG7KjTAcRdDfaHFreLEh2AcPOhxLPt93xp5yqAzGclynvwQEl8l5ipsXfbp5zfK74EuLFlPwdlR4UXKB15rj3IdDKC6uf52fX27H2wEddknbOGJVfa3CkdjwnScULY6.EFr7RCW.RBe.4VhWMH0QFlnxHJ7.ajSjj.KDKJZJTZQJ1RRTW.jLo.aVtsn1NKtjxQrSgezx4F0qdNDV9jR0PeUWTg0MzjTA7FrYXWx4Nd6w+U3lGlj56bOLWaLrWSBBypblyl24gIMu8YYuQkYwR0SnVM+J7vqSyR5kW92p.c3dgq4N5wudO2Z23zdfLNeweieJH1zsNrfXyoDqbp0of8Rkdb9TrhmQewMx5Ki5iWdKOLqwXYvYf13FqGdun8Zf+DbfPntrkJIkWLvGGmkuWWkXR5Hkjyba44XJ5OHQkgFtvEdI0zmxEtSHBW6TrzFIzlxv33jtT6H2oJtSkwQ3X5mc8n74gV4.UWL0omo2HzGYPHj3b276CttityemZPmFuWjIUfW3boF2S9C2Pa6uW76yw8MrlFGfWR9ek01vEmEvUSuDxQbiqw5vL7XP+gTyrCttiLFtxct32h2roKEMIX8rFc8J74S3xyb053itDevIzqJVuYTymhazyBotlKGCMw093YeHIUELijAKSsMmWs6uD0tczIYBKGyEnNlQ7f6Fj8LuHU+fnChi6q5wGhCWti39tp6sidaZLNWvM7dEg8iWhpqgWlGqh3W.yi4xaeFDTdqr9T8Pv51qRQ4CpTT17yUketp7SWUY0L9rbWodcynTfNd1B066KTyI7opD8Cv8xeGB2J7MjVymc5XNyQkUl3wyLOToFmPyOvd0diyOFWuHgxzp2y72Xx4beQ9NX5Pl+0xrUzIt0jlAWTs5HgGyeOiMMxtXYd7JHy2sBx7jUPlueEjY+UPleXEj4o2pLtugpCxrpD+M4vM5dbdwUXn+s3xeY0f+AP57fYt

If a project is started , scriptnode clocksync and then saved as xml , reopen the xml and then the clocks stop.

In this case HISE can be closed and reopened and the clocks will start running.

However , restarting HISE has stopped working for my project as the clocks will not start no matter what I do , to be accurate , one out of four runs.

link text

Christoph Hart

I've reproduced this issue and it turns out that I didn't reset the master clock state when a new preset is loaded so this might cause some internal glitches.

I've pushed a fix for this so if you reload the same snippet, the clocks will run again, but I can't guarantee that this might solve your other issue to so please check out the latest commit and see if it helped.

lalalandsynth

@Christoph-Hart Awesome, will test today.

lalalandsynth

@Christoph-Hart This did not help with my project, clocks are still dead.
Adding a new clock and its also dead.
Not sure what would be the best way to go about helping you to reproduce this ?

( As far as I can tell the three of four clocks stopped working while I was connecting knobs to them and the one on the far left that was not working before, started working)

The minimal snippet now works when reimporting so that was fixed.

Christoph Hart

Ah yes the hint that a new clock isn't running might lead somewhere, I'll check the initialisation routine again.

Also if you reconnect cables it causes the prepare callback to be called again so maybe this also creates some issues.

lalalandsynth

@Christoph-Hart Another one started working for no reason :)

lalalandsynth

@Christoph-Hart So I am only "running" 2 clocks now , they both started working today , then both died, then at the end of the day one now works.

I have no idea why both started working but I am pretty sure that one stopped working while I was connecting knobs in the scriptnode.

Clockramp not reliably running.

27

1.8k

10.4k

90.9k