Do I not understand the setLoadingCallback?

aaronventure

@Christoph-Hart https://forum.hise.audio/post/76283

This is the primary issue.

It's returning 0 before the reloading finishes so if you have a percentage bar that you're refreshing, it stops just shy of 100%. The solution is to check the reload message string with a timer for the bar refresh and set it to 100% when it detects an empty string.

Christoph Hart

@aaronventure the primary issue is that this callback does not have a precise execution order.

I've added the attachToSampleMap() function here:

HISE | Scripting | Broadcaster

An object for implementing the Observer software pattern

(docs.hise.dev)

Remind me in two days to update the broadcaster wizard...

clevername27

@Christoph-Hart That is fantastic - thank you.

clevername27

@Christoph-Hart Thanks for the docs, too. Some feedback -

I think you meant "The function expects three parameters. The third parameter needs to be a function…"

In the same sentence, you write "either" but the other case is never mentioned. If the two cases are regular and inline functions, consider: "The third parameter needs to be a function (regular or inline) with the exact…".

In line #3, should samplerID and eventType be switched?

By "SampleMapLoaded" do you perhaps mean "SampleMapChanged"?

d.healey

@Christoph-Hart said in Do I not understand the setLoadingCallback?:

Remind me in two days to update the broadcaster wizard...

Tis time.

Also might want to fix this bug while you're at it (if you haven't already) - https://forum.hise.audio/topic/9746/broadcasters-best-practices/30?_=1718707836936

d.healey

@Christoph-Hart How do we use the broadcaster to show a loading bar? It seems to me that the events trigger after they have completed.

Also SampleMapLoaded doesn't work, it needs to be SampleMapChanged.

d.healey

Can anyone tell me why this progress/loading bar doesn't work?

HiseSnippet 1429.3ocyXrsaaaCkJNJM1qYXsnOrW1lfwdvYsHvNWZGVQwbhSRQvhSMrSCFPPP.iLsLQkHEHoRa1PA1Gy9.1mP+j1eP2ghx1zxtoNtWVMfMz4F4494H2Rv8IRIWfbJd7UwDjysc6bES0uQeLkgNXWjy23FKHgbbWJK3XhTg14pXrTR5hbbJ7TMWNEWDk94e+0cvgXlOYDJD5DN0mbHMhpFgsU8eiFFtOtK4XZjE2aV+.eNqAOjm.ZTA2pnXr+KvAjivZ1VvE4rzdcoJtniBqHRfmc3cupSe9KYF9OgJoWDRz.0PcfCxfF0nOMraqAVqDgbbaMx1KXr8641j1kNDusOPSvajD19.mEtNUp1MPkbrToEMpzcb63KnwpQTz5yW4d.SQD8vfq1VUL7hVXiBtM3.GL0ZQ3WP1W..CknxCqV8AdvOq93Rk.2sT4cIV30ByHg07dh2.ICHpF7nXNC.pT1PtLHi4o0jD0I3vDRkzyYDxVfSS0lmnnLRkdILeEkypDrZo+rTQ88fgqP0mJ0m+gbeb3N7DVWo4XJFrVOHyX6vvJC3oR4KBLYDkWEXonlGoV0znr3hpHQ17YNo1DeUkSwmV8rG3cZM3G7oqel2OMTCLlvpZ7ab1Yfbudbq4PSheCbX3EPp3HChJaMrrH01n87xgrXwzaQpvBkNOWTYqpSdCoTl77SOSi7Czx8XAfOUq0Y2BjTDHfrhJoFbJyBRr1+Ww3ofPojGRVKVnwcMx6ceuxd+B789dSvUSfCnDrRl2Wamuad7dxS7JW1x14wFSe0GWrn1zGXfdb1QbE4YYVZoWWxKOod8lJMc9ofGFpOzoPN65d2BVgkDcAQ7.HqG7pCYDJ4FuNdoYqN12TtXwHmc.ipdVLICdedXWc8o94Iq5QY0avSO+fcwJrtQPFNfuXhPQ0piytjKgNol1BEc2kHeA3bS4MqHE4rrJk5JCZZnSxPT3pW10jvgd0vls+0I0uZHvatn9KocU8g1hN+sCB0mPC5qzPeOPcPAHv9R.3a0RLpbSi8svGSm8I5fA8N4cSBwpwanpmbjQ.hNi0ES2ohIopqrmrbC5xV8Z6xNqp3cbaQU98mtNtvTzQHt8oPGylMsh6d85AMyFofK5t+uOuChl8q+6LW+cc6nDDbDzXqCNJFJ9R0gRtYP09XrVP7LuVPVamNz+vhs2TemDvGIFG6+TO8p1NBFyL1cko4sIwDrBByVxrb81sepfmDmWpkqmlTbr.5UCtBaa7YLB3qU11XCAWJ6AlS5YIsI0JQDn8UivzlbIQHGG2QIQP7lAUtRcsXAcOBIQGeo9MwJA8U1bmdKUOFmFigckRgqkCd8bvajCdybvakC9g4fezHXiCsINVmY7CtQXAE62md95WR4gTl7bnWVOtHxjJjqa6slstsvom1IyhycnACuYClw6sXw5v.RpRas13TVFaoOU6Gt3rUV9dlZ7kei1wVms3.crCUGp1icIT.CXz53cggY8vIgpAXGuYRSNiG2myn9iWt.o+AADgstOUCZakBpVGg4d0aSBIXoU89OV+PXeFrX7t.2HewMe09oFu9VWi55o6.58gD29rllcsCKKLSCK+nquy+fyOqttuNaDpWG86I7Edb91toM88zyn++RUMuaYvf4eq.CI6.KF3SrGUp2SMCtpFVqPcHrto.5sUyHVSC6jQrVNhqaK454Htgsjaji3l1RtYNhaYK4VCHh7Gn9fkm8b5qC3TfvziqR26LD1RHztLRBq7ncC2x0OjC8zP2bQccif2QXNDbIWAmGMQDwcpQjE9fhHnHrufetu4U3z9nkSw.ZJK8+FpnaSMrWMT5q0Yqtf0QO22e7iZBAWedEbi4UvMmWA2ZdE7gyqfOZdE7me+BpWcZ6DEOxL3.gZ1ZOSRnydCSBKf9O.VLRpn.

aaronventure

@d-healey Because my preloadMessage workaround seems to no longer be working, so your timer stops on the very first iteration.

It's time to implement the broadcaster, I think.

d.healey

@aaronventure said in Do I not understand the setLoadingCallback?:

It's time to implement the broadcaster, I think.

See my post one above

I suspect that the loading callback is actually triggered on the UI thread because it seems to block the timer.

I did a test where I did the sample loading on a background task and in this case my loading bar worked, but it caused crashes in certain DAWs when loading lots of samples so I'm not trusting that method.

aaronventure

@d-healey here you go, tested with my samplemap. You were nearly there.

HiseSnippet 1543.3oc0X0kaabCDdWKuoVpIEMo4g9RAHL5CxsFNR4ezfzHaY6.iZkHH4ZT.CCC5coVQ3UjaI4ZGkh.zSPOK8HjiTuAoCIWIwUV10UMIs0O33Y3PxO9MCmOtosfGRjRtvyu7dCSId9WOn6Plpey9XJyamM87+7fTAIgiinr38HRk2FCSwRIIxy2uzy0Q4WdQOyO+wy1.mfYgjIt771mSCI6RGPUS71twOPSR1FGQ1iNvI562XmPNqIOgmAHpTPMuTb3I3XxKv5vVHvy+ZaEQUbQWEVQjd9KtAOZX297yX132mJoGmPzF085BKj0817jHMh0d8Z1mlD0dzIW544GzdBOTxxC2NnEMhN1uKenG.MYFt7g+BEgWoBvqtK7p4.uY.IeGHsnER2LnanflplLhFOeZvNLEQzCCztKTrw5svusXPSNDASs1.7IjsEfw3YT8g0psJB90JOoRksXwTFYMa1d8jjt3AoIDY0UdB5N2A0iKPvYRAkAUp.YIoBcJVfZiYjj5nmhFsIwDUS9fTNCLptrc3kgk29WqIIp8wIYjplsbhy1.+p5vyf0mTsWFKTQ4rpwqT4WpTVuOXXKT8oR85uKODmrAOiEIMKiIfTAOV.zxn3hvJ7ZTY6wEunmgxOgvRj6tc9jptB56P0MmyiIg3LIAVDBJuxexZ2CSSjHEGIH3v9n5qUyxKPrIXfQjFJa.NcUzYDTDGQUHnVVRRNkHQb3pQg0kBqHkQk8IQUpTNdsdvsBf3qN5fVc4iis2FVdE84TGiTyuZWNQQUjAtwYWoNjPU0CvGT6vUQGTG9E9f6dH5aFeZzNt2gGBS3MEyE6ZIrl3jjig6eSRGtzoIyjOmyy0OE4ZZHVIWyIgXF5myHhglrDhjHIm0mHH5CGsGZpsnbYygTpvBktUgn5Cpcd7ZF47n0fP67GUzcIE.ZdyDrfjpqEqZIbnrVxSHqkJz9trBnuEsLTDsL7umKpVPDPWrp4IQ847hYtmhpshluB6SBOYb4kNPclKkHTCQT35GAGMge3oV5YkmTtrldFQBPM2K3JxKyYiJuoBZ5g50aliouOK3II5EcFCmucW7DqxxFbLQrJzk.X9wABcyJ1hL3haQ51AOz1dwIPNaGFU8xTB6h5q6k2SB9qebmMABT2WM2WaKUR0PveSxofHksKa4fMIxS.B0DadiLO+kTlQuwndv5zmGE5ztTfMU58pw5X+59MFN13sG23LZjp+XGMdci9DZbeG8vuuwn64fuqANdm16ja0ZuuC9wJddNgAPRhGkkfUE0ozhy4C.YlBhCZA.ljpF5Jd+dS75pBwaFzlpB6OaLtvLvHj+9PfwbI+aDrUudPOyI.bwfs+oOL56ta+WY29aEzUAxJCfl.VkWq9dkfbq5uOd4U5U9kW4sj5ResSXuswFY.GIJ582aX1p0G.RxE1qbj2gjRvJHM6LmkZzoyyE7rzom0xMLEE6Ifd4.U3dFeIi.bsx8L1TvkxdvwwrVR2gZmIh0b0DOcHmRDxh9dQ1.Heyfav5dQ995dERhN+RCagUB5qbi1rK01CaxwvyQM10mx9tSYeuoru+T1OXJ6GNk8ilXaIzV3TckwWDr95G0gDSyjO9nM2okohXptqexUq6JrhltXNQtAMd7tY839H5w7tAaNO.eFOk8Zendc8hWsaeW9i++eP+zBeLP4QXrKUmc1hcJbOE7nw3s.sqd3rD0HuE6Yzhy3o84LZXwaEPUdbLQ3h8YdfVWofKkS7b6FcHIDrz4Z8W2XW3oOXQwK6+s3h5+s+vnYlu9x.KbQ5Fcn+I4sOpkYWplXoqjl36c7N+5ieTotOKWoD0U+4B+GOOe8.SucjVJ9eKnZ+b63QxbAfVXWP+Oj3pHtfVk0ZWSaqATWBKxXneTZ9f0GIepGr9nA8BGsTvYK+uMuD2uDgokNLO0KADlSbKokvqLzPBj79nfxA3PA+nP6Wtnw5RFO.JYl+mmJGzRaip6Y9ZFWnN.zqNJLr3RctId24ch2adm38m2I9f4chObdm3il2I93+5IpeNw5YJ9.ayTOuVs2xV.5u03BvRd+IpqL1KC

Basically:

store isPreloading into panel data property
check against that in the timer in order to stop it
check against that in the paint routine whether to poll PreloadProgress or to straight up draw 1.0

d.healey

@aaronventure Thanks!, It's interesting, because it works. But this doesn't

Panel1.setLoadingCallback(function(isPreloading)
{	
    if (isPreloading)
	this.startTimer(50);
    else
        this.stopTimer();
});

d.healey

It doesn't seem to work reliably in my compiled project, maybe something to do with it being an expansion...

@Christoph-Hart Can you make this work reliably, either via a broadcaster or the preload callback?

d.healey

@d-healey said in Do I not understand the setLoadingCallback?:

@Christoph-Hart How do we use the broadcaster to show a loading bar? It seems to me that the events trigger after they have completed.

Also SampleMapLoaded doesn't work, it needs to be SampleMapChanged.

Bump

clevername27

@d-healey @aaronventure The new broadcaster works great - I'll post a code sample if anyone needs.

d.healey

@clevername27 For a loading bar?

clevername27

@d-healey Good point. I'm wondering if the callback is good enough for the progress bar, and then use the broadcaster to finish it?

d.healey

@Christoph-Hart Could it be the preloading callback isn't working correctly for me because I'm not loading my sample maps from my deferred UI script, instead I'm using a secondary MIDI processor for this?

d.healey

I just found this in the doc on threads, is this why my loading bar isn't working reliably?

With the exception of the latter, all these multithreaded use cases are not synchronised by default (with the rationale of preferring data race conditions over deadlocks and priority inversions). The exception is the user preset load, which locks the scripting thread by default during the operation.

clevername27

@d-healey Have you found any resolution on this?

d.healey

Bump bump @Christoph-Hart What's the use case for SampleMapLoaded/changed?

Do I not understand the setLoadingCallback?

HISE | Scripting | Broadcaster

36

1.8k

12.2k

106.0k