Velocity-notenumber script?

[d.healey]

@hisefilo See my woodwind library (specifically the controller handler script) for some hints.

[hisefilo]

@d-healey :) thanks David!

[Christoph Hart]

Or just use this buddy...

/** TableVelocity Booster
*
*   This script is boosting the velocities according to the table value 
*   of the given note number and the gain slider.
*
*   Usage: 1. Set the table to create a boost curve for the note range.
*          2. Set the gain slider to control the amount of boost
*   
*   It will "fill up" the velocity to the max amount. Example:
*   
*   Table value is at 50% for a given note, gain is at 100%.
*   If you press a key with velocity 40, it will add 50% of the difference
*   to 127 (~43). If the gain is at 80%, it would add 40% and so on.
*/

Content.setHeight(150);
const var table = Content.addTable("table", 0, 0);
table.set("width", 512);
table.set("height", 150);
const var gain = Content.addKnob("Gain", 600, 0);
gain.set("mode", "NormalizedPercentage");
function onNoteOn()
{
	local tableValue = table.getTableValue(Message.getNoteNumber());
	local veloDifference = 127 - Message.getVelocity();
	local delta = parseInt(tableValue * veloDifference * gain.getValue());
	local newVelocity = Message.getVelocity() + delta;
	
	Console.print("In: " + Message.getVelocity() + "Out: " + newVelocity);
}
function onNoteOff()
{
	
}
function onController()
{
	
}
function onTimer()
{
	
}
function onControl(number, value)
{
	
}

[hisefilo]

@christoph-hart yeah!!! Thanks, scripting is not my field. Maybe in future Hise should add this kind of hardcoded scripts (for newbies like me:)

[Christoph Hart]

Nah this is a prime example for custom MIDI processing. A generic module would not make sense.

[hisefilo]

@christoph-hart I can see the script doing the job on console output but seems not to affect the modules,

Velo Gain: In: 32Out: 127
Velo Gain: In: 44Out: 127
Velo Gain: In: 40Out: 127

[d.healey]

@hisefilo Did you place it at the top of the tree?

[hisefilo]

@d-healey Yep!

HiseSnippet 1329.3oc4XstaZbDEdVvqcA2DkH4V0etB0JgyEKvI1ooQU9BX6hRvlZHt4eQi2c.FkcmY6ryZGZUdM56PeC5SQUeDxiPdCZOyLKrK1DLXkjVoh7OXNy4x24Lma3VBtKIJhKPVE5LHjfr9b61CXx905ioLTi5HqaZ2DGIIBGCocGDhihHdHKq7GnHXUXAj9y61ZWrOl4RRIgPmvotjmQCnxTps19oTe+8wdjNzfLb+vsa3xY0397X.O4sqfBwtuB2ibHVwVNaj0h64QkbQaIVRhPVKrK2aP697yYF9OgFQO0mnNTE0FTjg79beOEhUeGUqO02q0P+NBgrrakFExahBqX2j5QGQOMZbK8ENoRjMdXkaZvq50DdVYf2BF3ca61tBZnL8FE1V19DhO24fK9LY3Ek62yYWiyjDlbsHh7GHzd8kkqtQkUeRQHtGIcNCKbjX.gNeuyPNwddcTjJWReSo64TA9CDQeTonxkNm5I6C2rQ00G+h9Za.2bQqzCv33F4oL9okKovNv9lURLhhOipB3dJiW5PtH.6S+EhWKhvEDFxOJs5S5FybkTNygyNjKIGwJuZwesXAetK123Smf8iUNlAd8HxNinVtIDDA8nnpj9v3fSIhxqB.HQCmAA15ztcIBBjfCZo55Ox49NYjSE5coxAkSExi3Kw.ugXQDoASVNCNtyEU4czwDslzPJiwYjyGpcPaSzlN20XMPlhEfnZDG7wPAELZoFruyoDvv6SvRGEKMbjwPf0eyEioc6ZBpEeSwLWodCEbeeU.6x2ppvESQrxLcr9dPVA30C4CRzGuRZ4YqRx0jOkgQNqAiJOJjjzgXX5wPJUQibtrLk5TYopclIvVJooWJiRx2gh5bIhBdpTWReijRZcVIhB5XIac9BRGYftTV6.ZvCKwHqMrevlqM9myNZs05F+X0Websjyq08tYNaLu1l4M17lI1rsO0iHzFcQac6iDap6L+1e7O9ysPOuQckog9IINA3XgDgjpddrpSNC5yaZNUvtNI5URdn1KCB4LkKas3U4muV4ip4.CF9EceEPgKhxYlPX5mnn7aCGvjwBKcUdk1BuHWFKDP877Is3QTUZY5nn2tUTb2tzWqdI+Fjp2Cx5KsmTuGXb1kZOCCI3dw9X43SNTXH4Bkwx1htgJjBfXP1woyw3jJSbbR0IkCNiv811snR29SFu4l.dUI0ejwaxv4aXuGz1zUlB1Er2+EW2IwWOnbSCTV1tMkQzaLoAxWnO67S3yHNGPXDgJnNkcl9qYcmovYdmoibkf06HvrnPdzXJtMIf1AJVhxR74Qj8Eje9X0ibV503pwVS3p2s09fONQYZikwBc1xNA7Xlbrri7i+jXOaszGunIC+S+sxZg+EVp6CeU3G0lFywNn4ZcoenvsfT8fPexdL0lL.ESWi5jt3Xe4HpYAbSNiG1myntYSLNlHEzd8HhrtwD8scjR3GDjRYksOl3SvYSx+5seFjbhEM0sre+gk7yVXY1VGehOceksAtNpBVm+S02eICrKZObaOMfWYzQmQtyUCVn8gYTdlWzFviuPpDJkVchK8Th+3uKWdlw09c4Cxbs7++bt1w7XIk0qIFJDU6HA+9m1v7DWBfDFi3q5VaoVAK4bkgqO0lv7zG9a3SxkUUmsRtr5vK+jXi.rqf+RWyVtpZ0OSSA7al9+fPA6lpyNUGteqJ1.q.ReoqqJXeeH5LYIVetk3AysDObtkXi4VhMmaIdzbKw2NEITyY2IVxCLkd.gV6o+cEVV6wTsQzY4n+QJy2+O

[Christoph Hart]

Fail. I forgot Message.setVelocity(newVelocity);

[hisefilo]

@christoph-hart Yesss! it's working now! thank you!!!!!

/** TableVelocity Booster
*
*   This script is boosting the velocities according to the table value 
*   of the given note number and the gain slider.
*
*   Usage: 1. Set the table to create a boost curve for the note range.
*          2. Set the gain slider to control the amount of boost
*   
*   It will "fill up" the velocity to the max amount. Example:
*   
*   Table value is at 50% for a given note, gain is at 100%.
*   If you press a key with velocity 40, it will add 50% of the difference
*   to 127 (~43). If the gain is at 80%, it would add 40% and so on.
*/

Content.setHeight(150);
const var table = Content.addTable("table", 0, 0);
table.set("width", 512);
table.set("height", 150);
const var gain = Content.addKnob("Gain", 600, 0);
gain.set("mode", "NormalizedPercentage");
function onNoteOn()
{
	local tableValue = table.getTableValue(Message.getNoteNumber());
	local veloDifference = 127 - Message.getVelocity();
	local delta = parseInt(tableValue * veloDifference * gain.getValue());
	local newVelocity = Message.getVelocity() + delta;
	Console.print("In: " + Message.getVelocity() + "Out: " + newVelocity);
        Message.setVelocity(newVelocity);
}
function onNoteOff()
{
	
}
function onController()
{
	
}
function onTimer()
{
	
}
function onControl(number, value)
{
	
}