Scriptnode Routing, multiple channels ?

[Matt_SF]

@Christoph-Hart haha way better indeed, my example was just to demontrate the channel split process

[lalalandsynth]

@Christoph-Hart Sweet , this should work nicely !

[lalalandsynth]

@Christoph-Hart But how can I get each sampler from the Synthgroup into separate channels ?

I made 6 channels, they show up on the synth group, but on the samplers within the synthgroup, I can only route to 1-2.

[lalalandsynth]

This post is deleted!

[lalalandsynth]

@Christoph-Hart If I try and add channels while running, Hise crashes. It does not crash when i bypass the module and add channels but when I engage it , it crashes again
Not sure how to report that, large project .

Not sure

[lalalandsynth]

@lalalandsynth I also get this error.

[Matt_SF]

@lalalandsynth I don't know about the crash but the send node error happens because your receive node has 2 channels (and the send, only 1)

[lalalandsynth]

@Matt_SF Yep I thought so but unclear how to send/receive one channel or how to join them before sending ?

Did it like this

[lalalandsynth]

@Christoph-Hart But now my modchain stopped running.
And project crashes on load.

It seems to crash when I add nodes into the Frame2 block.

Can I upload the Dsp network, will that help to find the crash ?

Heheh.

It hangs in there until I add the last module.

[Lindon]

@lalalandsynth said in Scriptnode Routing, multiple channels ?:

@Christoph-Hart But how can I get each sampler from the Synthgroup into separate channels ?

I made 6 channels, they show up on the synth group, but on the samplers within the synthgroup, I can only route to 1-2.

Set the synth group to use all 6 channels...
set each sampler to use the relevant pair...

[Christoph Hart]

@Lindon I haven‘t used the synth groups for quite some time but it might be possible that the usual routing tricks don‘t apply there.

Is there a reason for using synthgroups vs. normal containers or a multimic samplemap on the other end?

[Lindon]

@Christoph-Hart said in Scriptnode Routing, multiple channels ?:

@Lindon I haven‘t used the synth groups for quite some time but it might be possible that the usual routing tricks don‘t apply there.

Is there a reason for using synthgroups vs. normal containers or a multimic samplemap on the other end?

Hey Christoph, its not me doing this its @lalalandsynth - as you say I'd use a "normal" container for this sort of thing....

but isnt it something like this (I havent tested it just set it up..):

HiseSnippet 1078.3oc6Z0zaaaDDcojV2JUmlFzbnG4gdPAvMPeXmVfbH1VeDHzHaASmfbKXM4HqElbWhkKUpZQu2+Us+j5+f1cIoEojYTUYbbKRnNHnclcHe67lY12AMQvsgf.t.YT+7E9.xXWr0BlbVuYDJCMpOx3KwiIARPXFa53E9jf.vAYXT84ZCF0qgh97mO6XhKgYColPnWwo1vKndTYp0IG9iTW2gDG3bpWlcu+gir4rdbWdnBOUwsP9D6qHWBmPzaqBFYry.GpjKrjDIDfLvGycVXMi+VV79eEMfdgKnWzFYodPwlGxcczHV+6SmCh4T3sYsg5Mi55L45bQ.BY7YSRyLUiyLODOl5PWZOMC8UQNLSiHaNxnxpPt5JPt86Bx4.IiLPpVLjd.1xVP8kodz34KviXJBaJQQEYgR7dQF+AtGWsAl7wdjqfgB0hkAz7IsZsmo5qG8zogLaIkyL4rS3R3TVyG03WZTuwu1vbcWSmlqO8qQvccAQtt0ruXSA1jE5cAH1ybNwMDVtQ0we0b5NaWN0N9TmYib1HFUdpOjrNsnncNL.JIso90KG0mHIZRIwlZe9fPR0vwnOLWU0GSQ0w8gfqjbeUc+M3OUkC2IzkHWsbR2Wk3PkOVgC0DEKfJWjsua8ZrZu67QqbaKx8ztkv8A3ITo8r7wakbvqJq8gFuIcr2COX5TvVlB1Z3gudism01tRosGJ2ekwpOWvC8iPxWGY.Bn+rZzZj412FyV825YqCXD0Aa33rOwdDgfBhQLG3mx7x+8kz9M77RFMfy3QP4HOdHSlEzId6CxP1JPOwgku.HNYiPidKPAUmnGYvJk4UKDWsZ2Tl8myL1c9PM1+Nsk78eBR0sCt+C2RU+ZLZQ87cgAr4fqZLYxXi9vTRnqbo0rfbrp3veFmQsyV0bFHEzKuDDYgdtmmijRkzgTKO7vy.WfDjoH7aO7ETFPDpzDTvTw+9Krykt9FbLbM0srlebL3u5G8C92VJuQhFM06WCjcSVZN70syUc1ugSUBoFO5SDv47ItjEMCH5tnyT3cOyKb41WYot73lxm7igvw5czzdFgw.2fhnxBeK0HfNiGJorKGSTsupaOvmD5YotGxF5kfNkMiJ56ehW2RuVWuXALmnE+k5Shy150FINaesy6HsY6hiuKS2k9+71SUgVzsq+WB06BhuPZs5Tp0pTqUoVqRsVkZs9zPqUmRsVkZsJ0ZsNwWYSDe0aGsVcK0ZUp0pTqUoVqRsVeZn0paoVqRsVkZsVm3qsIhGeChes2w8x8cry6UwUhyNYiryZN6lMxtq4b+rQt+ZNOHajGr7b4QrE72XG2ipms74QVT4ZVzeyi53w50lsQQ8sp3vsdbKjmRSxars0S79NEmjeLcJPLcKPL6WfXNn.w7jBDy2WfX9gMFiVN3QgRtW7sgJCSFDMJxvHVrcT6G5uAXXp06C

[lalalandsynth]

@Christoph-Hart Detune and spread was one of the reasons, also using the same adsr , although I could link adsr´s if using independent samplers.

[lalalandsynth]

@Lindon This example has a scriptnode for each sampler within the group. I need the 3 samplers to be able to use a common scriptnode, each going into a different channel.

I am simulating a Logan string Melody synth.
It has viola,cello and violin each going into an ensemble fx.
It makes sense to make one ensemble config and route all samplers within the group through that config via channels

Problem is , it seems I can only route them into 1-2, another problem is that HISE crashes when I try and add a frame2_block.

I guess another way would be to have the mod section in one scriptnode , and then control the the processing node on each one via global send (processing node is smaller)

[Lindon]

@lalalandsynth said in Scriptnode Routing, multiple channels ?:

@Lindon This example has a scriptnode for each sampler within the group. I need the 3 samplers to be able to use a common scriptnode, each going into a different channel.

then use a scriptnode in the master chain connected to all 6 channels..

HiseSnippet 1263.3oc6Zs0aaaCElx1LcNKacEqOrG0C6gTfr.6boq.8gkD63NiUmZDkFz2JXjniILEo.EUR8F166e01Oo8OX6PI4HYGUOOmKEMPI.A9bNjTe7b8yPouR5RCCkJjU8SFGPQVqgcFKzCaMjvDntsQVeMtGITSU1IpNXb.ILj5grrp9JiBq50Pw+72+zADNQ3RyTgPmJYtzWy7Y5Ls826WXbdGhG8DletUuydcckhVRtLBvSUbCT.wcD4b5QDyxpfQVqbnGSKUNZhlFhrpcfzaryP4khj0eJKjcFmZDZhbfCJQcGI2yfXiVTqgLtW+I26PDx5Q8y7BUS7BOE2i4wtRel23ahMXmsi79CqJSCupSAul4gWibvq.HYkCR0RfzSvNtJVfNyhAOeItq.BNCHfaOOTRVKx5uvsjvBD5M8IincTfvUaX8m2nwF1ved1KGDIb0LovVJNRpouQr9yV82Vs9p+9p1yZZvfBsYdLJImSUEZ1DoUyaiqKh7Oip1v9BBOhd0Bgq+z9T7G2mlOj6lbqysPonqfoeS.U7wRDPotJ3SusaahlXBDo5f0EPUZlABVsoW.Y0Igk531zvQZY.jWesXFjsH8h3D8zoPl5lTCfOXp3lI3HBY5w4qqlMup1hkWM+z9EEtOA2mocGVLdqT.dAu1cMdSqR+J7gCFPc0YfsFty6laIYsEK8ICJKZ44pokmvy2.j0REs67tlEVX9G3rhf.EMfnnmH6yIiWOj3GvoGC3cC6y3R2QNrekd8JmfDHbfYEq6NjHDTd3xTfsxB2zp4baZgNVFoYhy6QzJ1GfnyQQ9NPqbWZqTzAUuVqXpyRjaXjM4KNTgWrv+.+jZroQ1J0XyYLtkQtRpwslw31F4poF2dFi6XjqkZbmYLtqQFmZb2IFy0V3Hp9RoZTbJP5mA+W5TxHtlkdPn84b4ksj9ArzZFHxGqqujONXnTvbMpRVwD+y99xH3wjd09YR3IDF2TjcJUEFeHOB2XS3Wn.6HoGDRvcHtPnabehdnoR0z0CJEnpMcyO+NOxxmKZNjIiaShD.f7MW03gsUy0zKIm2HAU5URxv6FdpwpKgiN0jSYfJxblwUqDEL0FlzXDNPJG4Shcb23VqOdJdJuRIiBhumearBZHTrnriU271frRvBSV4PAApS5zK+I1hnTLppqvi9gbO7+7p9rWyxaErPoPFCkIIDYfN0ZapNRLEzSM3.sRHd42gA8NT.pdwGY3TyUpdCaNVHcpUtqnScuN16lOk91g8W8IXzgYFKbn3BJGpWRGM2lNf.U2WoMOH6A4CSZ0jknbLE5Ne94TUdnW38YesFnemo4o6cLkSIg4x6998dMzsgn5E2MZobEM+eSDtvv02gSfqsoJ09gA4ppetQt5V86674KgJ7cDgJbgDppbiHTcO8cdVCmLxxTY9e88G9DWRBIZwCQ+TB06i.+RQoZqRJUkTpJoTURopjR0CJJUaURopjRUIkpYC7UlWfu5sCkpsKoTURopjRUIkpRJUOnnTscIkpRJUkTplMvWadAd70B72yuSYz7dmxVy6cJil26T15ZuSYehqR9d2jZTSukuHVC3qEw+yNUG2yHa2DcQxqVEad0uHefGx6ccMc49AHlT7d1ZI1y1Kwd1YI1ytKwdd9RrmebI1yKl6dLT.2ORK8Sl.BJ5eXbqHKqDN0w84Q+6pFfKx

or put them all in a container...

HiseSnippet 1348.3oc6Zs0ahbCE1CfysMsaW07PebdnOjUJMBxsVo9PSBD1h5RVTHaz91JmYLAK7XOximjkV026+p1eR8ePq83Av.SPHxkMazPjh33i83Oet8crFZI3d3nHt.3r548Cw.m0gs6yjcq1EQXfF0.NeMrIJRhEtlgNteHJJB6CbbJ9F8.NqVBj74e+kiQTDyCOZH.3BNwC+VR.QNZzVG9aDJsNxGeNIvZ16cXCONqJmxiU3oHrLHD40CcE9TjdZEf.mkNwmH4h1RjDGAbJcL2ue6t7aXl4eAIhbIEqEp.ZqdPlgqyo9ZDq+NnZWB0u0fycD.3.aMxJTzXE1.1j3SFN9Hqw2jnvczJrsGNEFGdEGCdUrgWYK3kAjbrfTICjdErsmfDJGoQimW.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.OVsMoGseEEcNhP0IYWfEQIOjkgk2V8mJA6Ttuxk.qi7Ttt9sPxt5LUuAk621yt2YajYGKpeHCpZa7DJ.EnOpIM5VzpgCSLuVRkoWvDg2H5BsVODEbgNlRCUf9YZrOFDpm5xvnPphH4VQqQ8hBsg6YAq87Ev.tehUnx366FV66fo7XYU.sPB08HT89N.1CsPAZmzsagLpuyVnhV64JvrLOSGD8411jhyc9BAm69jDmyovwbdu.TREt678Od4Xck9FAONLofz2lL.NRwpIbSFduG2lSOggTDZ0aZ+DqhDBBVzf4i+j0l+2CaHZJMumQh3LdBTFT4dDnS0VCKiYiA8TEsUb9He6UnQearBp9IOxnwZ.r3B0Ey38YZM+LZoYo7dquas+LVSgqN.isI5l4NgcMlpRdRantFtCRUOe3n1froJ3XPCBihZNCq5o5pqvBanm444HoD40azHab3YXJFEYED98G9VU4HjnYRsqGZSwrbWeGz.WWcJq6yiqDU7YzUht+McqCMkD0N6m3dYEwURQ5OmPchqTAy7JUEtSWoZwnr2OmxNmx9oOkc4bJ6bJ6bJ6bJ6m3T1ElEkcw6GJ6CxoryoryoryoryoryoryoruqT1klEkMbJJ6mqubzG4yEXVmKmYct.y5b4L04J.4I3ezy7ty0UaWIYDULDK4WB3pvlZY2JfqMu4En9cyBBTT1ezySWP3GTwZYulcVf0r6Brl8Vf0r+BrlCVf07iKvZ9oYtFc2RGEK4AFxB0.sNI4MX43X5EMorB3+AoQxZK.

[lalalandsynth]

@Lindon I have 3 samplers within one Synth group and need to route each one to different channels.

Your example only allows me to route each synth group rather then the samplers within the group.

[Lindon]

@lalalandsynth said in Scriptnode Routing, multiple channels ?:

@Lindon I have 3 samplers within one Synth group and need to route each one to different channels.

Your example only allows me to route each synth group rather then the samplers within the group.

so you will have to work around that.

[ustk]

About the summing part suggested by @Christoph-Hart, why not just to use a matrix ?