No Multichannel output

[Morphoice]

@Chazrox the daw setup is fine and just as with every other plugin, probably the initscript is missing.... i'll check if its needed

[Chazrox]

@Morphoice for sure. lmk. Just sharing what I got. Hope it helps! Plugin looks great btw!

[Morphoice]

@Chazrox nop the script made no change

[Chazrox]

@Morphoice I just found this in my script....

//I think this is what Dave was talking about....

Sampler1.asSampler().setUseStaticMatrix(true);
Sampler2.asSampler().setUseStaticMatrix(true);
Sampler3.asSampler().setUseStaticMatrix(true);
Sampler4.asSampler().setUseStaticMatrix(true);
Sampler5.asSampler().setUseStaticMatrix(true);
Sampler6.asSampler().setUseStaticMatrix(true);
Sampler7.asSampler().setUseStaticMatrix(true);
Sampler8.asSampler().setUseStaticMatrix(true);
Sampler9.asSampler().setUseStaticMatrix(true);

I think this is the missing part.

[Morphoice]

@Chazrox still no change.
is the structure a problem`? they are all in a container...

[Chazrox]

@Morphoice Looks the same as mine.

Routing container..

Routing for first 3 samplers in "multi out" mode. See kick starting at 3/4 for me.

[Morphoice]

@Chazrox yep that is exactly how I set it up

[Chazrox]

@Morphoice damn...got me thinking...

Do you have this? Just double checking...

I have this set for my Master container,

const var numBIGDRUMMYVST = Synth.getRoutingMatrix("BIG DRUMMY VST");

numBIGDRUMMYVST.setNumChannels(24);

[Morphoice]

@Chazrox said in No Multichannel output:

const var numBIGDRUMMYVST = Synth.getRoutingMatrix("BIG DRUMMY VST");

numBIGDRUMMYVST.setNumChannels(24);

that changes nothing either ;/

[David Healey]

@Morphoice make a minimal test project that demonstrates the issue and share it here so we can try

[Chazrox]

@Morphoice grr..

[Morphoice]

@Chazrox @David-Healey

I fiddled about a little and this script finally worked:

const var MorphDrum = Synth.getChildSynth("MorphDrum");
const var matrix = MorphDrum.getRoutingMatrix();

matrix.addConnection(0,0);
matrix.addConnection(1,1);
matrix.addConnection(2,2);
matrix.addConnection(3,3);
matrix.addConnection(4,4);
matrix.addConnection(5,5);
matrix.addConnection(6,6);
matrix.addConnection(7,7);
matrix.addConnection(8,8);
...

apparently I was quite close already, but it does indeed need the script to do the addConnection and won't work without. Thanks for the help! I would never have figured that out on my own

[Chazrox]

@Morphoice yeee! Let go!