Routing matrix question
-
Why cant I route the sends from 1-2 to 5-6 in the matrix without disconnecting 3-4
, seems like I can either have 1-2 to 3-4 or 5-6 ?
What am I missing here?
Its the same at the end of the chain ? Must be doing something wrong.
-
Hold down Shift when clicking in order to change the send connection (the blue one).
-
@Christoph-Hart
You say "change" can I only route to either the 3-4 or the 5-6?
I tried shift but it will not let me route to both 3-4 and 5-6.I ended up just adding another routing matrix to send from 1-2 to 5-6 but I would assume I could do it in one matrix ?
-
Not 100% sure what you want to achieve. 1/2 to 3/4 and 5/6? Use the "normal" connection for 3/4 and the send one for 5/6:
HiseSnippet 545.3oc0U01aSCCD9baLZUBPfD+.5e.PMquL9Fi10hpfNEQll3aSFGuUKbrqRb.5+Z9G.mSJMNcUSnHgPju8bO246w246RTlgKxyMY.o2Ua2H.xiowa010yVyjZX4E.4ozUrbqHqekooa2vxyEI.gz8cNCjdAP42OdyTlho4hZS.bsQxEePlJs0ViN+8RkZAKQbkL0y6QmujazyLJSApmtzAvFF+Kr6DWxbt0gBjGMOQZMYwVlUji9L0jrMds4a5J+uVlK+rR3.gPLdPUlgYqkpjneeWyAfDDUey6VcyeAckLQt2dcE3YkD8qivuFP5zTRAMjTnujF3IoEFUh6.btbe4AdpKnRcnHLIEJlsoxbsfcDRSytyRsUnyk1s9sn+ox84zHoku935syQzK1n9aq2cM+mPme6sBtsVrAzEepsc5viJki9Pjbeszi9QSgUfoupn4PR8c8WwrYxuG1TTcenIhv+7IBXWVpRBl1KKRiwAQt.KIZsPgGNkbB3BsDOvg6f3XgNoDDTSF5vc2QVBn0jm5v+D+bj6A6HG5SN7.xQ9jiNfbrO43CHm3SN4.xy7I2CZWEA7qHd4nrHP7qHdj+uTQRY7LyM3RZalQ4d8dRoE7MktbEcO7eEHteH7Ulp.MPoCd0.HEWedCm6lodINOd7XNsEwLrEwLpEwLtEwLoEwbVKh40OXLt+b81BqIsZeKZHZ9ELKC2cLWyvMCkaQfew4MMsN
You have one send connection per routing matrix. If you want more, add another one.
-
@Christoph-Hart said in Routing matrix question:
You have one send connection per routing matrix. If you want more, add another one.
Ok, I assumed I had more then one send connection.
The routing matrix connecting and unconnecting is a bit unintuitive. -
How can I create more output channels ?
Like this.
-
In standalone I think the number of outputs are limited by your soundcard. Use the plugin version to access more outputs.