Preset Crashes DAW

[Matt_SF]

@Lindon you were quicker than me

[Lindon]

@Matt_SF said in Preset Crashes DAW:

@Lindon you were quicker than me

just passin thru....

[trillbilly]

@Lindon What would be better way for me to script something like this? I've got this on every effect module lol.

[Lindon]

@trillbilly what is the attribute you are trying to change?

[trillbilly]

@Lindon Just to cover the unused effect modules with a "Blackout" image so they have the appearance of being "Turned Off".

Power Off = Blackout Image ON, covers Effect Panel
Power On = Blackout Image OFF, revealing effect knobs/sliders.

[Lindon]

@trillbilly so what are these three lines for then?

	Content.getComponent("FilterPowerbtn").setValue(value);
	
	FilterEQ.setAttribute(FilterEQ.setBypassed(!value), value);
	Content.getComponent("FilterPowerbtn").setValue(value);

especially as the first and third are the same...

if you just want to bypass an effect all you need say is:

	FilterEQ.setBypassed(1 - value);

[trillbilly]

@Lindon @Matt_SF I just removed all code, panels, tiles, etc that had to do with either EQ. I re-compiled in HISE with no issues but the problem of loading presets and crashing still persists.

[Lindon]

@trillbilly well fix your EQ code first - and then remove your sample loader...and try again.

[trillbilly]

@Lindon

	Content.getComponent("FilterPowerbtn").setValue(value); //power button of the effect, how else would "Blackout" image know to be ON or OFF?
	
	FilterEQ.setAttribute(FilterEQ.setBypassed(!value), value); //this is to bypass the effect
	Content.getComponent("FilterPowerbtn").setValue(value);  //this is a mistake, I was thinking incorrectly.

[Lindon]

@trillbilly

its a miracle that this works at all:

FilterEQ.setAttribute(FilterEQ.setBypassed(!value), value); //this is to bypass the effect

it should be this:

FilterEQ.setBypassed(1 - value);

so you call back should look like this:

inline function onFilterPowerbtnControl(component, value)
{
	BlackoutImage3.showControl(1 - value);
	FilterEQ.setBypassed(1 - value);
};
Content.getComponent("FilterPowerbtn").setControlCallback(onFilterPowerbtnControl);

HISE | Docs

(docs.hise.audio)

[trillbilly]

@Lindon Awesome, thanks! That does look alot better in my script. My initial issue still persist of presets crashing within HISE.

When you say "Remove Sample Loader" do you mean the script + the panels? I have removed the sample loader settings via the .preset file and then the presets load. It's only when the preset calls for a sample to be loaded it seems.

[Lindon]

@trillbilly well you need to post as snippet

[trillbilly]

@Lindon I tried to create minimal snippet of the problem but the issue only occurs in my project. If I create multiple samplers with the CustomSampleImport scripts and use it, it works just fine saving & recalling presets.

When I bring that same script into my project, all compiles fine but recalls presets incorrectly and crashes.

Do you have another suggestion on how to create a usable minimal snippet?

[trillbilly]

@Lindon Here is the SampleDropper from within a .preset file that crashes.

    <Control type="ScriptPanel" id="SampleDropper" value="JSON{&quot;isCustom&quot;: true, &quot;value&quot;: &quot;273.nT6K8CFb.zCB.HqSy3BfKM.ZQBjVX.F.uHylje+06kKaOKzizB5UBSXaqTqVzViHswRluFAXo2Fe4w6Cppt.LDI.HCJ5hFUH44jUiMAmoPzcnkc0dxUOrn1SBtKcQKwgv3s.VGgCoabEBJvgY.F+Aluu9Fpd6cUIaX9IlV1Ww2+NhJ5SK99ghypzYTureHnLvwIY0FxSZrGjGq96hvFpi.VkgPNRawT7uKczCbKq9Y9a9dmR0KZlo4vlnlKiHIoqa01xi5MdRm3vTCPe9ZNtGq9vfa0HCarHj+vEn.JIPPidPorn4hSQwHyPM3TPFvjg.LXyWdq7hAUcqUC8RwYv2JaWUpAQ6rmQe8kRnEF+5dKC&quot;}"/>

If I remove everything and leave just the code below, all will load but with no WAV file (obviously).

<Control type="ScriptPanel" id="SampleDropper" value=""/>

[trillbilly]

So what @Lindon suggested for the EQ Scripting did help get by the first bug in debugging, thank you!

Now its coming down to the Sample Dropper. It seems it can't recall/pull the audio and pulls error after error (if you hit "Continue" in VS debug mode). Not sure what basically any of it means as it looks like it's the JUCE code rather than HISE (like that makes a difference). Ill keep at it and see what I can come up with!

[DanH]

@trillbilly are you sure your code for the custom import is correct? Sounds like the problem is in there somewhere

[trillbilly]

@DanH I believe so. Ive used the code in other projects with no issue. I'll keep chugging away at it. Its just strange behavior.

If I delete the presets from my preset folder, add a new preset with new audio, it saves fine. Then maybe a few times of opening/closing HISE and they start breaking/crashing again.

[Lindon]

@trillbilly said in Preset Crashes DAW:

@DanH I believe so. Ive used the code in other projects with no issue. I'll keep chugging away at it. Its just strange behavior.

If I delete the presets from my preset folder, add a new preset with new audio, it saves fine. Then maybe a few times of opening/closing HISE and they start breaking/crashing again.

show us the code you are using to load the sound

[trillbilly]

@Lindon @d-healey @Dan-Korneff @Matt_SF @DanH I did another rebuild and managed to get things saving correctly (so it seems). I messed with a few settings and properties so Im not 100% sure what it was but it's working so thats that. I appreciate all the help and input fellers!