LFO Sync Speeds - make slower

[Natan]

@DanH Dan, I added the Below Lines

On MiscToolClasses.cpp

    tempoNames.add("32/1");          tempoFactors[ThirtyTwouple] = 128.0f;
    tempoNames.add("16/1");     tempoFactors[Sixteenthuple] = 64.0f;
    tempoNames.add("8/1");      tempoFactors[Octuple] = 32.0f;
    tempoNames.add("4/1");      tempoFactors[Quadruple] = 16.0f;
    tempoNames.add("2/1");      tempoFactors[Double] = 8.0f;
    tempoNames.add("1/128");    tempoFactors[HundredTwentyEighth] = 0.03125f;  ///> THIS IS 1/128
    tempoNames.add("1/1");      tempoFactors[Whole] = 4.0f;
    tempoNames.add("1/2D");         tempoFactors[HalfDuet] = 2.0f * 1.5f;
    tempoNames.add("1/2");      tempoFactors[Half] = 2.0f;
    tempoNames.add("1/2T");     tempoFactors[HalfTriplet] = 4.0f / 3.0f;
    tempoNames.add("1/4D");         tempoFactors[QuarterDuet] = 1.0f * 1.5f;
    tempoNames.add("1/4");      tempoFactors[Quarter] = 1.0f;
    tempoNames.add("1/4T");     tempoFactors[QuarterTriplet] = 2.0f / 3.0f;
    tempoNames.add("1/8D");         tempoFactors[EighthDuet] = 0.5f * 1.5f;
    tempoNames.add("1/8");      tempoFactors[Eighth] = 0.5f;
    tempoNames.add("1/8T");     tempoFactors[EighthTriplet] = 1.0f / 3.0f;
    tempoNames.add("1/16D");    tempoFactors[SixteenthDuet] = 0.25f * 1.5f;
    tempoNames.add("1/16");     tempoFactors[Sixteenth] = 0.25f;
    tempoNames.add("1/16T");            tempoFactors[SixteenthTriplet] = 0.5f / 3.0f;
    tempoNames.add("1/32D");    tempoFactors[ThirtyTwoDuet] = 0.125f * 1.5f;
    tempoNames.add("1/32");     tempoFactors[ThirtyTwo] = 0.125f;
    tempoNames.add("1/32T");    tempoFactors[ThirtyTwoTriplet] = 0.25f / 3.0f;
    tempoNames.add("1/64D");    tempoFactors[SixtyForthDuet] = 0.125f * 0.5f * 1.5f;
    tempoNames.add("1/64");     tempoFactors[SixtyForth] = 0.125f * 0.5f;
    tempoNames.add("1/64T");    tempoFactors[SixtyForthTriplet] = 0.125f / 3.0f;

On MiscToolClasses.h

/** The note values. */
    enum Tempo
    {
                ThirtyTwouple = 0,
        Sixteenthuple,
        Octuple,
        Quadruple,
        Double,
        HundredTwentyEighth, ///> THIS IS 1/128
        Whole, ///< a whole note (1/1)
        HalfDuet, ///< a half note duole (1/2D)
        Half, ///< a half note (1/2)
        HalfTriplet, ///< a half triplet note (1/2T)
        QuarterDuet, ///< a quarter note duole (1/4D)
        Quarter, ///< a quarter note (1/4)
        QuarterTriplet, ///< a quarter triplet note (1/4T)
        EighthDuet, ///< a eight note duole (1/8D)
        Eighth, ///< a eighth note (1/8)
        EighthTriplet, ///< a eighth triplet note (1/8T)
        SixteenthDuet, ///< a sixteenth duole (1/16D)
        Sixteenth, ///< a sixteenth note (1/16)
        SixteenthTriplet, ///< a sixteenth triplet (1/16T)
        ThirtyTwoDuet, ///< a 32th duole (1/32D)
        ThirtyTwo, ///< a 32th note (1/32)
        ThirtyTwoTriplet, ///< a 32th triplet (1/32T)
        SixtyForthDuet, ///< a 64th duole (1/64D)
        SixtyForth, ///< a 64th note (1/64)
        SixtyForthTriplet, ///> a 64th triplet 1/64T)

        numTempos
    };

[DanH]

@Natan thanks. It doesn’t make sense to put 128 below 1/1. Why don’t you put it at the end after 1/64t? And I would change the calculation to 0.125 * 0.25 and see if that works.
Did you make sure you changed the knob value to reflect the new amount of values / tempos?

[Natan]

@DanH Dan,
I tried that and placed it at the very end of list,
It has no effect, or maybe my calculations are wrong.

Thank you mate looking gorward to your Try

[DanH]

@Natan did you try my calculation? Did the slower speeds work? I’m not sure I have time to try it today

[Natan]

@DanH Like This?

  tempoNames.add("1/128"); tempoFactors[HundredTwentyEighth] = 0.125f * 0.25f;

[Natan]

@DanH @Christoph-Hart @ustk
Nope, no glory here,
I Guess Hise can Go over 1/64
I guess there is A limitation wall on speeding up the Tempo

2/1 as you Described works perfectly,
and Please pay attention to 1/64 and 1/128
Both sound the same :/

[Natan]

@DanH Dan, Mate have you seen The Video :up_arrow:

[ulrik]

@Natan try this, it's not so well commented but I guess you understand what happens, if not ask

HiseSnippet 1254.3oc4XstaaaCEVxNJnxcCXcnEa+j+XCvAMKPx0MqXsEIMwNsAsNwHNqs+qfQh1lKRjZTTYyXsui6QXOB6MX6PR4HoL2DGsKEaKAAv7bgmuygmaNCE7.RZJWXY6d7rDhk8G4LZFSNc2oXJyZ+dV12z4HhTPmLgHr1YVBNMkDZYa27oJArcWwR+yut0N3HLKfTPxx5kbZ.4EzXprf5vseNMJZObH4XZbIo6t89Ab1t7HdF.llNdVI3fSwSHGfUh0vwxd09gTIWLRhkjTK6U1gGNazT9OvLx+RZJ8jHh5fu0H3hLj2iGEpPr5yV6NkFENbtSmZYY6LrHDzzDBtsy.ZH8b5EghOQy.UnQ43gciKCd90Dd1kf2JF3cKmQABZhrfi4YZeljHFigmfxvxHqUiGshytbPBlbiX7oj8Dvgy0n8lddqitum2ZOrUKAYB5jjXziQ8YSnLxFSHxmwSk6jD2F3qXGvyXRP.OPb3UKUhNCKPR3AUTnVff.QB0qr3vS9NRfDzdbFKPR4LDmc.WRNj0dsV+TKWk1LFn5.vgf2bkIU7OHK9DhPYU2Vty4Qmv3BR+y.WosTjQLboiQsUWwiQa5gd6aQ4eta4OuVKWvXtZbtAMUCsixXLJaR60PaU3Vnuw3LajJwBoVt12SEbbemxV47HFN6hihNAxUaO24ZmaGEjzESfsdNYVOHU.BzqAb0r0d8XA46AK1ABjtFMLf3Ky4.fQIuQAWyskDgmohNvksN3sJXcNObXnNvNdbaeEy0Q9dd4h.XW+26CZcVHz5VOn04pfVmqCz5tPn8fGZT4ZCttWE359d.m1H28tpDASZG766ZgtXZMbK575BeQkPmEOTPT0kfakBIbOB4WIiLUxSL4ZZ6VpHy0MulBR0TFHUaAc5XUqqJwE7nH0cn.vEXme6KfSthsY5Jt0g54HnxZtfPumpM2Vc4ZtEX53TRPNaeFUdXBI+bQ6O+Ez9yJukE7ouc+dXIV0QLmFHWBQHoJ3X2ibFLpwzez0oGI8THVBCa9CMOgV37vrHrrZec0vrbFP7nRCTUSRVJUNq7vtqQyduE1regd6RB2a4LjJCltX71XA3EhZ+ci27QmerS+wigV8EfcEm8dccmSVOnbGCTtoyqvmQzUeZfbG84wbQL5oDFQnho9WxFM+7xtQSxRuQygAR.BGKvrzDdJwu7MeAdcJyqGQlwpJtgTEoTt2df6URtar8bhcJSbHlU4xfyUtoAzer33urUeFFdPFQ.uI7vz.vYUwtxkCCyhRIuhFJm5WVwBxcJS9YXQH7tDTIAsYs1dpZcaI4WvpTq9AXSu+5K9+y2qp4xA2qXYT24XbDMNIhzmcFIBZHqw3mBcfGiyhjyoVsNa.mwSlxYzJY.EeKiRXegNzSjRXcqBJ2d6iHQDbZoZuuX6W.iKwBHNQpYrve4iEW160m6XfKR0b.8eiYLM+e+LlKuBE5e9umW5OyA5o2AoetQe3euOhmIguO1.LzM.lB4.aMOBFfFP.DyXjHvPN1MTqFZN6oNqfyHBKTe32fexY5qNamyzeNy+QrQLNPveSfYsZUCiano.9MS+Ozv0Yf5Lx2RupMnmi2FdVwvXm2DDnxo+JH9rXc5TCctWMzoaMz490PmMqgNecMz4AWpNpI9OISxiM4+.gg80emCaayFP5RAqeGP9zvi

Sorry, wrong thread... 🤭

[DanH]

@Natan are you trying to do this in develop or master? I see the code is in different locations in each

[Natan]

@DanH I tried with Both :|
Can't go 1/128

[Natan]

On Master, The structure is the Same, and the Code is located on UtilityClasses.h
And on Develop are located on places that you mentioned.

My wild guess is that Hise Calculation can't go 1/128
and Christoph Has no Comment Yet :(

[DanH]

@Natan works for me

[Natan]

@DanH Really? No Way
Can You Send me The Cpp and .H Files?
And Let me know What Cranch You Use?

[DanH]

@Natan UtilityClasses.h.zip

[Natan]

@DanH Youre on master?

[DanH]

@DanH I had to set the project tempo to 60bpm to really hear the change in the arpeggiator, but the lfo was more clear at 120bpm

[DanH]

@Natan I did it for master, I don't see why it wouldn't work for dev too

[Natan]

@DanH So It works on Master?, Right? You hear the 1/128?

Building right now

[DanH]

@Natan Yes

[Natan]

@DanH :) <3 Excellent