Start/Stopp Arp

[MikeB]

@musictop said in Start/Stopp Arp:

Thank you but - I don't want to switch off the arp but start it, make it run, set it in motion with one button

[MikeB]

@d-healey If that is the only way, then yes

[d.healey]

@MikeB

is the only way,

Don't know if it's the only way, but it will give the results you've described, but might still not be what you want...

[MikeB]

@d-healey
And how do I do that?
Is there a description somewhere?

[d.healey]

@MikeB

My video about making drum pads should show you want you need.

The two functions are playNote and noteOffByEventId

[MikeB]

@d-healey
Great - thanks - was there a snippet on Patreon?

[d.healey]

@MikeB No, there was a full demo project. Search for Triggering samples with buttons

[MikeB]

@d-healey great - fantastic - found it - thank you very much David

What would we all do here without you :-)

[MikeB]

@d-healey

@d-healey said in Start/Stopp Arp:

@musictop That's the bypass button

By the way, it is NOT the Bypass-Button
Funnily enough you have two possibilities to switch the Arp on and off - see screenshot or snippet
Via Enabled and via Bypass

HiseSnippet 1429.3oc4X0kaaaDDdok2zH65D6TGzBzW3CEEInoBRJ+zVzGh7OxIpNJVvxwIukrlbnzBSsKC4RGKTTfdT5QoGghdB5QH2f1YIoDIsjUnU9CsUOoc1cl8a91YmYV1wWZAAARehQ4CF5ADiOk1cnP0eq9LtfzZahwUnsYAJv2LVzlC8XAAfMwvnzCzBLJuHgPdQ8v+79axbYBKHQTzuCkbK3Q7AbUpzNM1k65tCyFNfOHypuSiVVRwVRWYHhmRzpDOl0wrdviY5ks.kXbol1bkzuqhof.hwhaJsG1su7Uh30eHOfejKnGTizEMTr3cjt1ZDqkR1pO20tyH+NfPLncRYgRwrv5z1ba9X4orwpQSXlpQV9vXgYAuZuY3UcZvagLvawX3sFsqkO2SkNiFaKSaIvCJGFdDjEVwqkX76zsj3BDpJCXGC63iCFqvMtW0p2x7tUqdyezITXo3RgoT7XoB1SbiatzOuT4k9kkLO6TNNScN813KccA+oNs9T2eVJdCQ3fi.+aYdByMDFuPz8yyuzhwuVwdclEJEsDb0ddf37BJHITEx+kRPE9OUD6ekD1eyPkRJHbjjKSiGTiDA4zX5WeexX0WLV8qkndWWtM32ACwiLwJzTASXFBwloXDiujV6dUpTw4a1biJU9gc2tRkaG1IdLgbAvY8ofymzZa8dfQLI9NxGdfuhqoZisgSvaxwgekoaCAGqjdQjy.OoPyTFeRAnmSGuk+5SZLLc+eXCuQreKasM1v2C50iyvi6ZXd.eLE.Fp1JxXMEL7X1lnfSws8550ZJcbLOgyLGMGICvt7Ef3y.vmlAfMNrwq31p9iE7B+F8Adu9o409siloOjtIsD1voiB7tHzW8Ln60uLK88fhSeWgFmaHw9wb3543v3EfIpmHu3JYMbR4gbaUtzgkxecsTwttNyKieVABxOiGNiajmuMVgtOD.poaBx4eWK9TNxDWk93vAcUfWhryXjUaTDirLUagHrLenX0HCz8X94.ihQGnUj9pcggAuMLB5Ld.XuqPdzYMvWOIarZhAvqHGI2TdZjIv6vvKCArKiwhKtCkAJqP2yRwNA1mI5Aym2Tl1senii6EQ8LT5xIowNfCyeQi0Q5X.+.LCRlIlcsio8iT786PvUZwUCK798FpUM686ZzGAhdp9Ee2NVuaG9S3t8LYm3wjhEZsFEaySH.2tfKXoyu8lirlpg9b5dgJuP06HysFscmlXNT+QFbBJnf2ctp1PME1miYp1nHgsWh9Prc0oDxOYWpXuxR6PWcggrMPqe0PxDXWe4pXnaGUDfQWYYoKPW0UKbS+EEtqQ6vUV8mNdWXJ3U2v96Y7NtVbSGGLxJErKR24Yy6CRlOnb8XnrL8oXtznGNFAjqGM1Q5Ov7Af.7mr2fLOcD+8GE8oidE9oiwo2OvmIB7jAPsrV9LyUO6baCpPQ9kGKJ2pzt2Nn6kYcWtwHg0yJrCSjyX33bVpMOsmNxec+3ZBcAzar2KvBc1nNsxbcnSna.7Tcun0xpXp35YE+PluMdtXkK.sz6imodoOBuh9c+8829zSkJFbmBCZzYhuFClGmOvyEZJNAq6hRzX7Z3yubXgtpQRye0psTH85KE7bG56CJedudPtXoo5PanT55rikrdi8wJXrfLW29pFOhK.lOxSvbxE0JNWLqyqufFCWSc9.y+aTVoz+6KqL6anXJy+8bRiMCFXU2L5317i+489xPEWzqMCyFfEdhdhJVyDeNUbSg5uplwB5WvDOtpdrFNcAgczf+F+kLYM8XijIqMZxOH6w.lku74Vw8qpSXb4HIneKh9Xwkos0iMG+kznzpUpRFfkcdtkkNl9aQ9Y55TeNz41ygN2YNz4tygN2aNz46lCc99Ypith+FgJ4f33eTPmlQevQCiQeyN7p.4e.RjWbrB

[d.healey]

@MikeB The Bypass option and the Enabled option both control the MIDI processor's bypass (on/off) button. This is the same for all MIDI processors not just the arp, but the arp also has a separate bypass button of its own.

[ustk]

@MikeB Creating a button that plays a note so the ARP starts playing would have been easy, except if I remember well the ARP can only be triggered from external events, not internally generated ones. I reckon Christoph said it's a safeguard so the ARP is not triggering itself. I can't think about a solution to start your ARP...

[MikeB]

@ustk Thank you - it works so far with David's script from his video.

The next challenge is a button with the purpose to switch between internal start/stop and BPMs and external start/stop and BPM from the DAW - also sync with host.

[Christoph Hart]

@ustk no that is only true for sibling processors. But a script in a container will start the arp in the midi chain of a sound generator inside the container.

[ustk]

@Christoph-Hart ok my bad... I need more testing then, I surely made a mistake during my attempt

[MikeB]

and is there somewhere a description of how to use the Arp

a. run it internally (I already found this thanks to David)

b. externally synchronised with the DAW - tempo and start/stop.

[MikeB]

@d-healey said in Start/Stopp Arp:

@MikeB

My video about making drum pads should show you want you need.

The two functions are playNote and noteOffByEventId

As I said, it works fine so far.
The only thing is that something is still not right - at least according to the error bar.

[d.healey]

@MikeB I'm not sure why that error isn't reported in the tutorial video... The error is telling you the problem - the first parameter (eventId) has a value of undefined.

The solution is to set eventId to -99 and change the else to else if (eventId != -99) and after you turn off the note set eventId to -99.

[MikeB]

@d-healey I will try that - thanks David

[MikeB]

@d-healey reg eventID = -99; was already enough. - Thanks