last build (1.1.2) compilation errors
-
the first time i compiled in debug mode, and just after in release and it works.
for the dynamic: i didn't see it. Think it's not in this version. -
The latest version I had compiled from GitHub had a dynamic effect ... Compressor limiter gate.
Can not recompile from Github.
I had to take the link that is on itself.
-
-
Sorry guys, I am closing in on a HUGE rework of the interface designer, so I was working on another branch for the last week and the master branch got a bit neglected. I'll try to merge it within the next days so we're back on track.
-
Thanks for answering. So, I will be patient!
-
this version works for creating VST synths but no VST samplers/romplers.
VST using the sampler module are not readable in any DAW (crash and/or freeze when trying to load the vst plug). Standalone works.
am i alone with this problem ?
if i use the sampler module for vst test = i use 1.1.1.
for other cases i use 1.1.2 -
Yes samples are not supported anymore.
Just kidding, I've been working on a better way to hotswap samplesets without clicks but it might cause some issues in certain edge cases. Can you upload a minimal example that doesn't work on which DAW
-
Or can you check the Musicbox example from the repository? Last time I checked it worked.
-
To be precise my project has the same problem than this simple project (just a sampler module and an empty interface).
i created this simple project to test if i made mistake in my own project. but the twice works in standalone, but in VST No (in reaper, studio one -> freeze/crash, Bitwig and Sonar just refuse to load/show it)link (GDrive): link text
HiseSnippet 1046.3oc2W0saaaCElJ1bHNoaXsKWrK8E6hTzNC4zt0BzKp+IIEAKNQyJHn20wPQaSDIRAJJ24Nr2o8.zK5KwteOB8MX6PIKKpTuDarr0g5KLDOGdH+N+9I4ojTVRhTgb19rYwLjycv9yD5I8mP3BzQ6ib1D6oXILMp2rXRRBK.43T6EFsNMpix989m2iDRDTVoHD5bImxNlGw0kR857C7vvCIAry3QV69wcNhJE8kgxT.I0vtnXB8RxX1IDy11.ilxYuNA43hezdsTW19h2zsk4WOye8aM83V6adxyu0nrGZ05kGz5AO3TDMUoXB84f4HGryeB+bvGDv0RkulnYvYh6ICl4OQ9ZQ9UeNOgeQHyrnMxGvTt3CkgAFm277QBMSMhPYVlg5OgGF3UDPSPvI6UFdqkGd2AOfGvWHuLL+kYJZVZgc31YipPtdEH29lgb6kAOGK3UOGd2E6SU7XcoFC11Fuvgq.q78hbdKtuD1fP2JhbI6PErXgA61dOW2G17Itt2+YiRETMWJZJEmH0rSE6d+s9ksZr0ut0U0LZzxTYtEkLLjoVlVSIk5ZLaWQZzEL0CaNkDlxJ1GDcpFa2d0hszbO1ZiRwQBt9zX1701Q+BGtPqKZgiZKpzAskl4XKYakh9vjKZdFwzz8AYYnVSFjFRzUK.MM0yU.AtJYZS5Tjv0yra5WipR2UtpbUg6cwdbMcxxw6FKAuPA++13cdO9miOXzHFUWB153Ce4saCs6M.kcxgx8v9ZEiDwEi8IQwPgUFdZfKVcKLT+mV4g5.QRnjD3yei01dWmdoP3RUU5u0I6p5FISEUtq4.eHKlQzP1uvl+3q9weu6vguPISiupUu+4Y0Jmo.REHRXq3TgYFt11G6qjIIi.2I6rRrU4kpFahUkRFxlxTIUkcRZDj5EBVngcwwADki5Aj3Lxrqx.s4pk8Ay8HvoZsyd7wVGsQR0lXqstvsNi.msEw0MvR7YeDHwt8GW7Oe5VsUCt2.OaiBL5yMosCDSgVBPR9Hs8YiHog5ERsA4.oPFOQJ3zp0eZEe7XlxF5K0e5p0P4eojc5LjExHIVMceSmi4BFQY0Vstgh1qdn35RWeMNGtMMiTZ9oAoTsOgHkt8CcewbJolvsqz+OOOeGbF2PSCo2GKnNTlpAxrADX.vOCTJ.qiOvzRY1bOaX3yxW6ZVa.jOSD3V7wPyU1dAQEnrcgRDs3n.ea9y6SzD.SLggEI6csBAJvP6R5DfO2.IfoCkjkTiLrS0MQNPlOYJKeBSNd9aIsGvodRHXB8QlgN3m8eiSGQnJ4qn4uisw02LSBf.Q1Wi1.OvrtYaT1GRjmrh.duWQoltpuERWK2h8VaKdzZawiWaK9t01huess3IqsEO8Zrv7RFcS0xn7YrHze0MguwI -
Well, I need the samples to check this. You can simply send me a link to one of your samples to info@hise.audio if you don't want them out in the open :)
-
???
no problem for giving samples, but as i wrote before with and without samples it's the same thing. That's why i din't use samples for this simple example.are you just explain me that i must "remake" the samplemaps and hlac files ? not the same beetween 1.1.1 and 1.1.2 ?
for me the problem is not the samples. it's just the 1.1.1 vst compiled projects works in all DAWs, the same compiled project with 1.1.2 doesn't work; it crash DAWS
i miss something ?
-
No problem here to export with version 1.1.2! However, I still can not compile from GitHub....
-
ok, maybe my 1.1.2 version...
Is it possible to have a compiled 1.1.2 version (with standalone app for working) ?
will try with it my project -
Sorry guys, I am currently in over my head finalizing a huge project that is going to be released on Friday. I'll promise I'll clean up the codebase and make everything smooth again next week.
-
Good luck with your project Christoph!
-
Thanks, mate. BTW, you wanna beta-test? :)
-
apparently it was a problem of several circumstances.
1- bad compilation. recompilation done <- just repaired the sampler module problem.
2- the construction of the project with the settings and scripts of the 1.1.1, some of which have changed on 1.2.2: therefore incompatible.
3- presets made with 1.1.1 not compatible with 1.1.2 new settings. if used with new VST/project -> error/bug/crash/ shot down in flame.the samples are not in question because I just tested them in a new project created only with the version 1.1.2 recompiled and it works.
I think I'll have to start the project from the beginning (from scratch), not update it.
and again with that I'm not sure to solve the problem.seems that you changed the LFO speed steps, also same thing for arpeggiator, and few minor things in many modules. if using all of that in project, it must be redone, not updated.
I will try and keep you informed.
-
Yes, sounds fun
-
Wow, I'm looking forward to Friday!
P.S. Christoph Hart, I am sending you a message!
-
ok:
found problem with:-
background images (in OnInit because created with 1.1.1 and duplicated in UI JSON DATA with 1.1.2) -> so that create problem with vst.
-
presets problem (i already wrote this before) -> i must recreate it.
-
GUI size -> If i chosse height larger than 700+40 (708 or 710+40) -> vst crash/Daw freeze at vst analysis. So i kept 700+40.
-
last thing that everybody knows but me -> before compiling again = erase all folders in Binaries. i just erased the compiled folder. So made conflict.
for now, without new presets, it works (updated version from 1.1.1 with modified settings of new functions)
of course will test it again before saying "problem solved" until finished.
-
