Has anyone found a workaround for pitch bend amount?

[SteveRiggs]

Hi guys,

I've been stuck on this for a good while now and wondered if anyone else had found a workaround for it?

As there is no dedicated control on the pitch wheel modulator that snaps to actual notes to set the pitch bend amount range, is there another way of doing it?

Using this one doesn't work very well for a couple of reasons...

1, As the range is actually -24 & +24 notes when used with a pitch wheel, (not -12 & +12 like it says) it doesn't snap to the correct note even if the step size is set to 1.0 in properties.

2, If a slider is added on the interface assigned to the pitch wheel modulator intensity with these properties set:
linear,
1.0 step size,
min set to -12,
max set to 12 ,
and middle position set to 0..
...when you turn the slider on the interface +1 step, in the back end module it jumps all the way to +12 anyway which pitches it +24 notes on the pitch wheel.

The only way I can see this being a useable function is if we had the option to set the step size to 0.50 to compensate for the 12/24 difference.. or if there was a dedicated slider added onto the pitch wheel modulator that could be assigned.

If anyone else knows a workaround though I'd be very interested to hear, as I'm stuck as hell on this one

[d.healey]

Do you need to control the pitch bend with the pitch-wheel or can a knob on the interface be used instead?

[SteveRiggs]

@d-healey

The pitch bend I'd like to be controlled with the pitch wheel. It's setting the pitch bend amount with another slider that I'm struggling with.

Ideally, I'd like a slider on my interface assigned to the pitch wheel modulator intensity that snaps to the exact notes between 0 and 12 (or 0 and 24 would also be cool) ...but as the range on the pitch wheel modulators intensity control is actually 24 and not 12, there's no way to set in the slider's properties to move the step size at 0.50 (which would be 1 note)

Having the step size at 1.0 would move it 2 notes (but moving it 1 step on the interface jumps it all the way to 12 anyway)

If you set the step size to 0.1 and move it 1 step then it jumps to 1.20st,

.. and setting the step size to 0.01 makes it jump to 0.12st

Very confusing

This is set to 0.01...

This is set to 0.1...

...and this is it set to 1.0

The sliders properties are set like this...

[d.healey]

@SteveRiggs

I see what the problem is, the intensity slider has a range of -1 to + 1 when used a processor/parameter so you need to convert your knobs +-12 range to match. There is probably a simple way to do this. Give me 5 minutes.

[d.healey]

This seems to do it. I divide the knob value by 2 so the intensity range is -6 to + 6

HiseSnippet 1453.3oc2X0saaaCEVJNLs1qonsqWraFfPvtvAnK1t+Nfhg5DGmViVmZX49yUKiQh1lMRjBjzowqnuA6gYOBEXuP8MX6PJIKYWgzT2r0hlq74vyg7SG9c9gomf6QjRtvxt7foQDK6KgbmxTiaMFSYVc10x9xntXohHbhUsyzHrTR7srsK8PsB6xqZY968OXGb.l4QxTYY8bN0i7DZHUkosWyGSCB1C6SFPCyY8sa1wiyZwC3S.7TBU2JB6cDdDYer1rUPV1q01mp3BWEVQjV1qtC2ep6X9qYw1+bpjdX.QKzvxE1nX06wC70HV+aqVioA98R+tkVV1ndYQgRwQgqi5R8oyzmEMthYAmLOxGOrW4zfWikDdqjCdqFCuqhb8DzHU1JZr8cnNL3hZHFtBxCqXasV4usQs3fEL0Vg3iH6I.gYdT8t0qeCm6Tu9l2e8JqWAtHjJmiwBmdTk23WLlPB5x8mDfguuFN+pigkr0HhZl1paXL0wXqSlwaDuiTV.kQbFNg4onblCm8XF+vFZDI3AU83gQbFfsa.mZvDxlqW4MqWobQm9VRhA2LIUMspw5Z2by6Wd8Ju0bRoej.3ZktqU2vbZaro14jyrENH3PfgUcdnngaNTtOWQdJq5lUdSkxUdaEmEWZ3vBWKYyBHhBWVy7EmliUYSBOjHRiFoFBTf44Xqc13XdwwjbFxYcXT0SiHIxYrvFEvBsRBp.ezNAgfoJCa7xIrQ2.pOQXQgM4BHSD0x.970CrdVmcwJb51.6HbJQDghp+Xr2kbLTuHljWFsKQdjhGYrM4dDJP8QOzSlcfu62ZNclvuSaJUS0gl0LFZER88CH83.MBB84QITuKxk9GfoHTispaImLbH8DSIngzfPoBN4NgPkIK6qgdlj33SFhmDnbjGA0I.d9QD+Abi8g4KQV8cg3SxI1z5rla+8IZyp7znnbb6+D8l1ubP696u8SNvsU+N8F71ZgDeJtlO9XRsWvEG4znFrIuh3ojfL2+0TlurlKeHEePl7i531tV7tJqs.hj0jZqyL9X5gBH0zjr9HLChphsdk7C3pUNu3poYkoZpaMKYLuprbv7ZModEXVlpSi9uTD3BtlgFIoEzx2cQ2RMYAMmL+U7rRd4a49IzxodgsbJLY+LB2qhL23Ei2UJ.u5tY+Gi2jF3qiZObHPwy.6pn8d4x1sd4fxOFCkqgbUBBFJDLxEGFArQCdpfRjZbdLSUzYdlpdBR.G6GWdK0r20bGnDGQLu1+po4n1NjOgM2Ykf79jHBVO.PNetXy98enfOIZQud+CLjkABniKDJxuvSYDHtqx+M1RvkxgvmiYuj4Wp2DwHcrJSSexwDgbdc6OIDt6YLR.3Lx1Vm4JI56ZpWWLT.+j7VaNk5Cvl6anpsQtwBx2bA4asf7sWP9NKHe2EjuWlbb.sKNRyLzC5tPkyKb1FzE1fdX3SNGKdG5nYadrl4KwjyzYwbCtxcZELT5ZeAlY97u.1me81RmM3VPDzt2G71qqfbo5qp1rigbTPiFiWC5hXFtHU670K5xY7nwbF0a9LBfgOZDQjG6E9AssRAIjYZtdy9j.BVlKk9mZ9DXxcrX9D8OoXQiydr3ztu9ATLbczE4b91nOYoO29jeBOkLeb9hou2O6IVIw3heF2GGy6Pi3AXgt2OTpMo3V1xc.9qPMeUZ2PNWMd9VVzlmaDquRGL3z3JWNYr.G3zEpuxI1WBYZj4nm63KET6ymnf4IR6oifF+tvvNdj7s+WQORQrbcsrg6QX9Fg+A9KYwFoyJnWrQ5hVdoaE7sk7ayi.rKQXZZtYd2.XJjf4dEY1qF+eAkgXOA+.u3Wynw5EMZ.TxL+CzJi5pkcl8rbDpN73V3YvzC77zIB+LDgK1matD9bqkvmauD9bmkvm6tD9bukvme4T8QOWz1ST7v3tBfhdsiIV1smQrJY8uUxZzyA

[SteveRiggs]

@d-healey Brilliant mate! Thankyou! Thats been bugging me for ages!!!!
Works perfectly in the snippet. I'll get it added into the main project now and test it. Thanks man!

[ustk]

@d-healey @SteveRiggs I was trying to do the same by dividing the incoming message by 2.
But I encountered an issue I don't understand. When using Message.setControllerValue() in the onController CB, I get this error:

Interface:! onController() - Line 7, column 32: Call of setControllerValue() outside of onController callback

But I am in the onController CB...

[d.healey]

@ustk Post a snippet

[ustk]

@d-healey Just two lines in the onController CB throws the error:

HiseSnippet 702.3ocsU0tSaCCE0tTOszMjFR6AH+YREIVUBCXHMgfQ+XpZqP0BCs+gLNtsV3ZGk3.qBgzdu1iydA1av10IARfUPnJg6OZuebRN9dO2aGFqY7jDcLB6bzrHNB+RRvLkYR6ITgB0uCBuBIRXXStXBmKc8WOwf1eVDMIgGhv3k9jMMrScDB8y27qeu69TIUw3EtxNGqEL9WDSElRuC26yBorGMjejXZkr2Xu9LspsVpSAJsDwCEQYmQGyOfZSqFAgeV2PgQGGXnFdBBWeec3rfI5KT44erHQbpjaM7QAvCJ2cOsLzxXqWT6IBY3vqu5IH3oLrrPrTdg30jAhPwM9KKHuJKfaIhp0CbsGhd9Uom2imd3JzqdN8VgDvhEQlxHVt8BRekgGOhBsfpzJOWTsMvj1ZHCko0T5Y7dwfwMHZtkm2Zta54s5GVtAjVhVxawjbZbSqG6mQoJlQnUtZ0AZC+PUyUabYCmFW0v8tgFMZtwru9XsTxiyCKF41b.bAfdbqwbSY3CRmdpMI2c1Ajcau5kK2vwENEecMljpXNlJS4M8yuANWcmWsUpE+PjpoJ6ctl641myMIB07a2TI2eSsplikWoqjnV0WILGFwU2WqFUzdfe8s9cnFps6W3CxKhGaDVJf6vOGFqx0BNjN7jyL5HXv5+DJfbUGlJolaqgsCtEAfZvsDKVAgJQXlUNW9mceRD1OV5tBYncGz74as4vWnp8Ty2h0DKS5NZDmYJIacRuu+zuS.8UcpQnFOfZhE+.zjv7R.r0jwAlnTboUmhqYUT41dVaakIfqByL9KbJB5aswEA8uNHZJkEqOgkOcXWD87LO.mTY6icHCr1t9nrIF.GwqkGZJre7DFyVJdKv84iY8E.y6V.Lar.X1bAvr0Bf48K.lsePL1+Z5ioF8z7wDvwvtYqQv3tJJnxxTjn+AzcLB4

[d.healey]

I'm not getting any error from that snippet

[ustk]

@d-healey That's weird
Probably something broken in my Hise version...

[ulrik]

@ustk I get an error from your snippet, which Hise version are you running?
I'm running the latest scriptnode from today

[ustk]

@ulrik Hmm... That's really strange, mine is about 10 days old.
@d-healey, what's your version?

[Christoph Hart]

Interface:! onController() - Line 7, column 32: Call of setControllerValue() outside of onController callback

This usually happens if you've deferred the callbacks using Synth.deferCallbacks(true); The error message is technically correct (the callback will be executed in the timer callback of the UI and not the MIDI callback of the audio rendering), but admittedly a bit misleading :)

[d.healey]

@Christoph-Hart My first thought too, but the callbacks aren't deferred in the snippet.

[ustk]

@Christoph-Hart @d-healey Nope, they aren't, effectively...

[titosg]

I have the same problem, I want to make a pitch slider but it isn't working properly, is there any way to fix this?