Loop points sometimes don't get imported
-
I'm importing wav-files that has loop point set, and some, but not all, get's the loop points imported.
Here's one that Hise seems to miss:
https://www.dropbox.com/scl/fi/emni852izgkxmx3zfdg7a/1_-8.40_ClPu_E4.wav?rlkey=3wfpt45zbk9qsu6jyqlj0ev4y&st=4lboslq0&dl=0
Here's what it looks like in Wavwlab:
and here's the same file, imported into Hise:
I've checked the "Extract metadata for mapping" option, and also get the popup "Loop points found" window, but no loop points in the imported sample in Hise.
Any ideas?
-
@Sampletekk Have you tried enabling Looping on your selected samples?
-
@Chazrox That only sets loop points for the whole sample. Thing is, that all samples has loop points already set in another program. When importing to Hise, some of the samples still has loop points, others not.
-
@Sampletekk I tested your file and couldn't find any loop in it, tested with Zynaptiqs Triumph, Zynaptiqs Loop Editor and DSP Quattro, no loop
In Hise I didn't get the popup "Loop points found" -
@Sampletekk I loaded your sample into ocenaudio and a loop area was shown but it didn't actually loop on playback, even with Loop mode activated.
I loaded it into Zynaptiq Myriad and again, a Region was shown but not a Loop.
No loop was found when importing the audio into Logic's Sampler either.
-
@Sampletekk Could you also upload a file where the loop WAS successfully imported into HISE? So we can check for differences in the loop markers.
