Trying to make a template with 6 tabs / pages

[SteveRiggs]

@d-healey

Hi again mate,

I just watched the tutorial video through again and tried to follow along so I could apply the steps to making tabs and panels for the pages I need but I've made a total hash of it and I'm stuck again (sorry about this!)

I just joined up on your Patreon and voted for the tabs video, and I'm going to check out the scripting 101 video next, as its clear I have a lot of learning to do still on the scripting side.

I'll put a snippet below of what I have so far. It's probably total rubbish and loads of stuff missing but I can't work it out.

My script watch table list doesn't seem to be showing up either which has confused me a bit as I cant check if the right buttons and panels have been saved into array lists.

I've put all 6 of my buttons in radio group 1. Not sure if that's the correct thing to do but I figured I won't need all the buttons turned off at any point so maybe it was easier to do it that way around?

Heres the snippet anyway. Any idea what I'm doing wrong?

Thanks again

HiseSnippet 1046.3ocwW0saZbDEdVrW2.sTkH0K5ka8UfbpEfAZqb+g.FGgZ.iJ3jVEEYMr6fYjWlY0rylXTTjpTus2zWh9nzWkdaeCZOyN6BKDLJqiKgqXNmy278smYNybl9BtMw2mKPFYGNyifL9DyAyXxIslfoLTmSPFegY2.WpzykXMDOx2ZHwWZUwZLWXUOzBp4LOruOwAYXryiUvLxtKJ72+7CMwtXlMYgID5obpM4IzoT4Bq8a7iTW2SwNjgzoIhtZiN1bVKtKO.j3NlkPdX6qvWR5gUgkwDYrWaGpjKFHwRhOxX2lbmYClveESG+So9zQtD0fxnAvDoMeJ20QoXkUTqITWm9woBeDLK8WjX1QmX9LytTG5b6KRP2Ozg0BDIyGFY1j7JmTdkVq7JsN4YjPd6pk2CLGXKndxEdTZ6iM6vjDwXLrDjTV5XQY9iLls3PDL4gSwWQNU.Clinv2TpzCspWqTwiymKeNXg.V4eIVX067tWz77gCOq2.quyp9wIbMJPJgAf4m+B.UN01jBTXXoisnVeaRnfgCNnXtWmyB9Eg64zW.wFKoKIxV7odbFLnv9MCCYeqCfI7fxEKdbt2rhl5+ndsexaIIOLi3tYEoAtjfzn1jd5qhXY4nRSTlKkQrFGvrkTNyhyzBurZVDb2B1wSwCA44FPJlO2qymKKVHvyNjxbHWWPkvyFN+G5C6UhQpL+FEGaJAUd+hG5qrGhoE10cDTxTXUYnlqDZrGWRNiUP80mE9PV0y3wqyUzT4RDqyqpRVrAXEXASGQDwYgn3fMzKWwXdyULIKns0ojDAxYcXT4YdD1MUlihxiPE0dQhBBUFVO8oQ0S5rFhBkMYMiRgnPEm7XNTJfWIFtoQH5T.8naOzp2dn0t8PquBzy6bBVhUmfEk5gkCOhPRUqzFmPdIb0f97rrlmP7uRx8fqjluGGY7QuCqNWqn6ZfsYw79Jpibxh0qeowDB8xIIt+46aHvNT9iE7.uUVWSA0UzT+2e.n9HM0OyX6ScUM0+0G.pqootdlsO000T+m24Tuml57w2mqtEHj46YF9+v82K5lZ17A+ZyFKKf6+6qJfO+2ZjFppr8n5nsGUU2dTU6lnBcmSU82yup2tiRnuVtSfKVtbytpN7ib.WmuTWkpNGY9T4rj6seu6.ds2b+NJ2GX1mJsmrd8lYM5EtZ5+a8F8dh7lsGOlXKWH1cMO8muae7vZkxOwCjT1kcwRAUcFVufoCfmWYS.kvTM8pNNKi5dd83RwGuMfvbBG7uvuHmkUiMhbVN1IZJ1VvuvV2nf5EK2KzBnIV3C2xZ1UM1ZdqTJcOEdF0E11pDwWBJe8HpjZDGkZDUSMhZoFQ8Ti3qRMhudCHTuY8QAR9TcYAXne6vdyLLZyvvtpvcfn+CT.0Q7M

[Dan Korneff]

@SteveRiggs you're pretty close. You have successfully created arrays for 6 buttons and 6 panels, but your function script isn't quite right.

[d.healey]

HiseSnippet 1073.3ocwW80ahbCD2KIa5AsTcmTenOt8dBTth.BPaE8ZoPRNgZgfJjSW0oqolcMfUL1q10atfZOoVU025mi9b+H0OB8aP638OrKbjnroEwpnHlwyOO+7LdrGOvQXRbcENHsriVXSPZum9vEb4rNyvTNp6wHsORumGiJsYDiQ3wtFiHtRipFSDNFM70fZuvF65RrPZZ68LELsr6i7+96urMlg4ljXUHzyETSx2PmSkwZGz5qoL1oXKxH57DVWqUWSAuifI7.JtmdYjM17R7TRerxrL5HsCNwhJENCkXIwEoseag0hgyDulGX+yotzwLhRnBZHLQApOUvrTLVoE0YFkYMHJT3hfYYPbfYuf.yGn2iZQWpON.8P+ALhQjLdnk41nWkjzq7cmdZIn29Az6Q5CMcn1x3QTb6c06xkDmIXHEjjVA1hx7GYz6H.K3xRywWRN0ADVhnvmUt7SLZTubwl4ykOGjHfL+UXGi9m26h1mOZzY8GZ7TiFMSLzXOoDD.0u7UMShwFyIrk5yo19TfBhkaZPM97jSIn3vCKl6Gymy.9BmvWReEXbDWmRjcDysEbPnvia6axiMNDlwCqTTwVEx.Oda.Gnr3svE6wRtJy4RGAqClwFCa8JH3AtKTewl4dCDanbFkSLl3wMkTA2XMqJXF4zm.AClGoXd05KKSXhYFTqqAJF51RTtE45ylDCQwqrveqGxBVekXD9T4rffVvBHLxsRLnjKrmKhM9N7oFTf7Jidi+7C+OA86Kjjy3EfzPtrvJzX8glLYiiE5AFwYiCqJtctMfE3dyGSbhhRQFB6xWsLR+lKiRVkaFj1SXnf2kSkmYS32TwEJbuBTlcPHq.Sk9EYueXQVPxEQgZor5ABUP9TN4YenT.uZDbcMezo.5Q2en0t+Pqe+g1XMnm28XrDqNVKLzCoCahijpxzZGStBtuH3Ptr5GSbuTJrg6oVVGizdm6P1453Ly22ZQx6idM0RNKVw20ZFgNcVhKm9hVNXKp3YNBO60xuofBUSPg+hsSnvQInfs2NgB0RPge3m1ITndBJ7m+xNgBMRPgx+1VfBGDPg7QMEntFvmAOP2+2qTOfPwD3ma2ZUB7veecB7g+ZqMrZuQWU8+lqtJ5jcs8RiWOZm30Z6DuV+l7JZa50F++sVe6tYgdpEVdLrb0FsUutHb.nsgU5nU00J2kJWjrjXqz88cktORe.UZNay7MyF3KbC31lugukIu9ISlPLkwjce8Sew1+gKnuU3Io7o8vRGJr8Quu27gvS6LI.S3pVUUMEjQ0NQfb4nlDFR3V9B+C7ENXEkrV3fUhFDMGa5HtvLneD0qkdfuFfSb+GMlUumR1XYGaJdOGdB2Ellp.wGCLeyHplZDGkZD0RMh5oFQiTi3SRMhO8VPndu7W4IEyCJK.ECNwuEPMsS3XXWk+NPz+BPmvnPE

As @dustbro said you got pretty close. Since you have the same number of buttons as there are panels you can just use a single loop and constant for both.

[SteveRiggs]

@dustbro @d-healey Ah that makes much more sense! Amazing. Thanks guys. Good to know I wasn't a million miles away I'll keep on learning. Hopefully it will all click properly soon. This helps loads. Much appreciated fellas. That's made my day.

[Natan]

@d-healey Sir
What if we want to make the Buttons open n Close the panel and Do the radio Style Aswell?
Any idea?

[d.healey]

@Natan Don't rely on HISE's button groups for this, handle it yourself with a loop in the button callback.

[Natan]

@d-healey Have no idea,
I got 7 buttons, and each one Opens a specific Panel and Closes other ones, Also They set All the Other button's Values to Zero Once they Get Clicked.

It's A little Out of my Knowledge :/

[d.healey]

@Natan

Sounds like you have it already, what part is missing?

[Natan]

@d-healey
I write it down in a dirty Old-school Way.
Like if This = 1
This.setvValue(0);
That.setvValue(0);
That.setvValue(0);
That.setvValue(0);

And so on...

Tyring to clean Up and optimize some of My code parts, And need A example Like that to Study, And Translate it my Project.

Just one If This button=1 Others Value=0 And Hide Evrything = 1 , Expect the One That Connected to that Button.

[d.healey]

@Natan Did you see my video about creating a tabbed interface?

[Natan]

@d-healey Nope, Where is it :)

[d.healey]

@Natan Give you 3 guesses ;) It starts with a Y

Edit: Starts with a P :D

[Natan]

@d-healey Haha, Will Def Check it out Right now :) Been at your channel A Few minutes Ago, The New HISE SAUCE name Is Very Good :)

[d.healey]

Oh actually I was wrong, seems that video is still only for Patreon supporters.

[Natan]

@d-healey Yeah I'm At Your Patreon Site :)

[Natan]

@d-healey Well done Sir, the video And project on Patreon Is exactly what I was looking for :) Thank you