Trying to compile C++ DSP info in HISE/load into Scriptnode
-
@d-healey I'm working primarily on Mac, haven't looked at this in windows yet - do I need to compile this on windows first and then macOS?
-
@Lurch said in Trying to compile C++ DSP info in HISE/load into Scriptnode:
do I need to compile this on windows first and then macOS?
Nope.
@Lurch said in Trying to compile C++ DSP info in HISE/load into Scriptnode:
I built a totally different scriptnode project, still fails at 50%
Make a new project. Add one script fx, add a gain node to it. Save it, compile the DLL. Does it work?
-
@d-healey That worked - I've then moved clouds.dsp (my Faust granulator) into the Code Library/Faust folder, opened it in a scriptfx, compiled again and that was also successful. Clouds.h is what's throwing all these errors in the main project, so I reopened the main project, cleaned the build directory (deleted all the .h files etc) and then did compile DSP Networks as DLL again.
Same error, still tripping up on it's newly build Clouds.h file -
Downpour - Dynamic Library /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Builds/MacOSX/Downpour.xcodeproj The macOS deployment target 'MACOSX_DEPLOYMENT_TARGET' is set to 10.11, but the range of supported deployment target versions is 10.13 to 15.5.99. /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:72:46 No member named 'Clouds' in namespace 'project' /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:72:56 Expected ';' after alias declaration /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:73:50 Use of undeclared identifier 'NV' /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:73:53 Expected unqualified-id /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:77:39 No template named 'wet_path_t' /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:79:39 No template named 'wet_path_t' /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:83:50 Use of undeclared identifier 'wet_path_t' /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:84:52 Expected ';' after alias declaration /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:85:49 Use of undeclared identifier 'NV' /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:85:52 Expected unqualified-id /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:120:51 Use of undeclared identifier 'dry_wet1_t' /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:121:52 Expected ';' after alias declaration /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:122:49 Use of undeclared identifier 'NV' /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:122:52 Expected unqualified-id /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:127:37 Use of undeclared identifier 'wet_path6_t' /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:158:38 Use of undeclared identifier 'dry_wet5_t' /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:159:52 Expected ';' after alias declaration /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:160:49 Use of undeclared identifier 'NV' /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Clouds.h:160:52 Expected unqualified-id /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Main.cpp /Volumes/RHR Audio/Development/Clouds Test/DspNetworks/Binaries/Source/Main.cpp too many errors emitted, stopping now -
@Lurch Yeah it's what I suspected, something on the faust side of things. Is this faust code you wrote yourself?
-
@d-healey It's a granulator example from the Faust webpage! All works fine on the Faust IDE webpage.
/////////////////////////////////////////////////////////////////////////////////////////////////// // // Grain Generator. // Another granular synthesis example. // /////////////////////////////////////////////////////////////////////////////////////////////////// // // ANALOG IN: // ANALOG 0 : Population: 0 = almost nothing. 1 = Full grain // ANALOG 1 : Depth of each grain, in ms. // ANALOG 2 : Position in the table = delay // ANALOG 3 : Speed = pitch change of the grains // ANALOG 4 : Feedback // /////////////////////////////////////////////////////////////////////////////////////////////////// import("all.lib"); // FOR 4 grains - MONO // UI ////////////////////////////////////////// popul = 1 - hslider("population[BELA: ANALOG_0]", 1, 0, 1, 0.001); // Coef 1 = maximum; 0 = almost nothing (0.95) taille = hslider("taille[BELA: ANALOG_1]", 250, 10, 500, 0.001 ); // Size in milliseconds decal = 1 - hslider("decal[BELA: ANALOG_2]",0,0,1,0.001); // Read position compared to table write position speed = hslider("speed[BELA: ANALOG_3]", 1, 0.125, 4, 0.001); feedback = hslider("feedback[BELA: ANALOG_4]",0,0,2,0.001); freq = 1000/taille; tmpTaille = taille*ma.SR/ 1000; clocSize = int(tmpTaille + (tmpTaille*popul*10)); // duration between 2 clicks // CLK GENERAL ///////////////////////////////// // 4 clicks for 4 grains generators. // (idem clk freq/4 and a counter...) detect1(x) = select2 (x < 10, 0, 1); detect2(x) = select2 (x > clocSize*1/3, 0, 1) : select2 (x < (clocSize*1/3)+10, 0, _); detect3(x) = select2 (x > clocSize*2/3, 0, 1) : select2 (x < (clocSize*2/3)+10, 0, _); detect4(x) = select2 (x > clocSize-10, 0, 1); cloc = (%(_,clocSize))~(+(1)) <: (detect1: trig),(detect2: trig),(detect3: trig),(detect4: trig); // SIGNAUX Ctrls Player //////////////////////// trig = _<:_,mem: >; envelop = *(2*PI):+(PI):cos:*(0.5):+(0.5); rampe(f, t) = delta : (+ : select2(t,_,delta<0) : max(0)) ~ _ : raz with { raz(x) = select2 (x > 1, x, 0); delta = sh(f,t)/ma.SR; sh(x,t) = ba.sAndH(t,x); }; rampe2(speed, t) = delta : (+ : select2(t,_,delta<0) : max(0)) ~ _ with { delta = sh(speed,t); sh(x,t) = ba.sAndH(t,x); }; // RWTable ////////////////////////////////////// unGrain(input, clk) = (linrwtable(wf , rindex) : *(0.2 * EnvGrain)) with { SR = 44100; buffer_sec = 1; size = int(SR * buffer_sec); init = 0.; EnvGrain = clk : (rampe(freq) : envelop); windex = (%(_,size) ) ~ (+(1)); posTabl = int(ba.sAndH(clk, windex)); rindex = %(int(rampe2(speed, clk)) + posTabl + int(size * decal), size); wf = size, init, int(windex), input; }; // LINEAR_INTERPOLATION_RWTABLE ////////////////////////////////// // read rwtable with linear interpolation // wf : waveform to read (wf is defined by (size_buffer,init, windex, input)) // x : position to read (0 <= x < size(wf)) and float // nota: rwtable(size, init, windex, input, rindex) linrwtable(wf,x) = linterpolation(y0,y1,d) with { x0 = int(x); // x1 = int(x+1); // d = x-x0; y0 = rwtable(wf,x0); // y1 = rwtable(wf,x1); // linterpolation(v0,v1,c) = v0*(1-c)+v1*c; }; // FINALISATION ///////////////////////////////////////////////////////////////////////////////////// routeur(a, b, c, d, e) = a, b, a, c, a, d, a, e; processus = _, cloc : routeur : (unGrain, unGrain, unGrain, unGrain) :> fi.dcblockerat(20); process = _,_: ((+(_,_) :processus) ~(*(feedback))),((+(_,_) :processus) ~(*(feedback))); -
@Lurch said in Trying to compile C++ DSP info in HISE/load into Scriptnode:
It's a granulator example from the Faust webpage!
You'll have to debug it in HISE, or perhaps someone else on the forum has already tried this in HISE and can tell you what you need to do.
-
@d-healey It compiles fine in HISE, what further debug steps can I take in HISE to see the issues?
-
@Lurch said in Trying to compile C++ DSP info in HISE/load into Scriptnode:
hat further debug steps can I take in HISE to see the issues
I'm not sure, I haven't worked with faust in HISE. A forum search might turn up something useful.
-
@Lurch said in Trying to compile C++ DSP info in HISE/load into Scriptnode:
@d-healey It's a granulator example from the Faust webpage! All works fine on the Faust IDE webpage.
/////////////////////////////////////////////////////////////////////////////////////////////////// // // Grain Generator. // Another granular synthesis example. // /////////////////////////////////////////////////////////////////////////////////////////////////// // // ANALOG IN: // ANALOG 0 : Population: 0 = almost nothing. 1 = Full grain // ANALOG 1 : Depth of each grain, in ms. // ANALOG 2 : Position in the table = delay // ANALOG 3 : Speed = pitch change of the grains // ANALOG 4 : Feedback // /////////////////////////////////////////////////////////////////////////////////////////////////// import("all.lib"); // FOR 4 grains - MONO // UI ////////////////////////////////////////// popul = 1 - hslider("population[BELA: ANALOG_0]", 1, 0, 1, 0.001); // Coef 1 = maximum; 0 = almost nothing (0.95) taille = hslider("taille[BELA: ANALOG_1]", 250, 10, 500, 0.001 ); // Size in milliseconds decal = 1 - hslider("decal[BELA: ANALOG_2]",0,0,1,0.001); // Read position compared to table write position speed = hslider("speed[BELA: ANALOG_3]", 1, 0.125, 4, 0.001); feedback = hslider("feedback[BELA: ANALOG_4]",0,0,2,0.001); freq = 1000/taille; tmpTaille = taille*ma.SR/ 1000; clocSize = int(tmpTaille + (tmpTaille*popul*10)); // duration between 2 clicks // CLK GENERAL ///////////////////////////////// // 4 clicks for 4 grains generators. // (idem clk freq/4 and a counter...) detect1(x) = select2 (x < 10, 0, 1); detect2(x) = select2 (x > clocSize*1/3, 0, 1) : select2 (x < (clocSize*1/3)+10, 0, _); detect3(x) = select2 (x > clocSize*2/3, 0, 1) : select2 (x < (clocSize*2/3)+10, 0, _); detect4(x) = select2 (x > clocSize-10, 0, 1); cloc = (%(_,clocSize))~(+(1)) <: (detect1: trig),(detect2: trig),(detect3: trig),(detect4: trig); // SIGNAUX Ctrls Player //////////////////////// trig = _<:_,mem: >; envelop = *(2*PI):+(PI):cos:*(0.5):+(0.5); rampe(f, t) = delta : (+ : select2(t,_,delta<0) : max(0)) ~ _ : raz with { raz(x) = select2 (x > 1, x, 0); delta = sh(f,t)/ma.SR; sh(x,t) = ba.sAndH(t,x); }; rampe2(speed, t) = delta : (+ : select2(t,_,delta<0) : max(0)) ~ _ with { delta = sh(speed,t); sh(x,t) = ba.sAndH(t,x); }; // RWTable ////////////////////////////////////// unGrain(input, clk) = (linrwtable(wf , rindex) : *(0.2 * EnvGrain)) with { SR = 44100; buffer_sec = 1; size = int(SR * buffer_sec); init = 0.; EnvGrain = clk : (rampe(freq) : envelop); windex = (%(_,size) ) ~ (+(1)); posTabl = int(ba.sAndH(clk, windex)); rindex = %(int(rampe2(speed, clk)) + posTabl + int(size * decal), size); wf = size, init, int(windex), input; }; // LINEAR_INTERPOLATION_RWTABLE ////////////////////////////////// // read rwtable with linear interpolation // wf : waveform to read (wf is defined by (size_buffer,init, windex, input)) // x : position to read (0 <= x < size(wf)) and float // nota: rwtable(size, init, windex, input, rindex) linrwtable(wf,x) = linterpolation(y0,y1,d) with { x0 = int(x); // x1 = int(x+1); // d = x-x0; y0 = rwtable(wf,x0); // y1 = rwtable(wf,x1); // linterpolation(v0,v1,c) = v0*(1-c)+v1*c; }; // FINALISATION ///////////////////////////////////////////////////////////////////////////////////// routeur(a, b, c, d, e) = a, b, a, c, a, d, a, e; processus = _, cloc : routeur : (unGrain, unGrain, unGrain, unGrain) :> fi.dcblockerat(20); process = _,_: ((+(_,_) :processus) ~(*(feedback))),((+(_,_) :processus) ~(*(feedback)));where have you put all.lib ???
-
@Lindon It's one of the Faust standard libraries, it'll be in my Faust directory - other Faust work I've done has referenced stdfaust.lib and I've never had to include that in source or anything, even in the project as a whole?
