Mark notes that contain samples by coloring keyboard keys

[gorangrooves]

@d-healey Hey man, thanks for much for the script! It is greatly appreciated. Can't wait to try it :)

I am aware of the settings for the keyboard in the interface designer. However, I am not able to change anything. Actually, I make an edit, but as soon as I rebuild the interface the changes revert to default. Not sure what the deal is. Am supposed to do something else as well?

Thank you.

[d.healey]

@gorangrooves You need to press F5 once you've edited the data

[gorangrooves]

@d-healey Thank you!

[Christoph Hart]

Ok this was one time too much that people stumble over this. I‘ll add a button and a discard warning ;)

[gorangrooves]

@gorangrooves I tested the script and it works for a sampler :) Yay!

Is there a way to specify that it uses the master container that contains all of the samples instead of a single sampler? Or do I need to replicate the script for each sampler?

[d.healey]

@gorangrooves If there is more than one sampler you will need to modify the code. Put all of the samplers in an array and loop through all of them, test if any of them have a sample mapped to i and if so colour the key - so you will have a loop inside another loop.

[gorangrooves]

@d-healey Thank you! I spent the last couple of days thinking of your answer. While I understand every word individually, I can't say I do when they are combined in such a way I am sorry.
Could you please give me some pointers with regards to "array and loop"? I assume I am supposed to do this with code and not with the way they are arranged within sampler container, no?

[d.healey]

@gorangrooves Yes code.

So you need to use this part of the code which gets the sampler const var Sampler1 = Synth.getChildSynth("Sampler1");

But instead of storing one sampler in one variable you need to store all of the samplers you are interested in using in an array. There are several ways to do this but the simplest is manually one line at a time.

const var samplers = []; //Declare the array
samplers[0] = Synth.getChildSynth("Sampler1"); //Add sampler 1 to the array (index is 0)
samplers[1] = Synth.getChildSynth("Sampler2"); //Add sampler 2 to the array (index is 1)
samplers[2] = Synth.getChildSynth("Sampler3"); //Add sampler 3 to the array (index is 2)

Then you need to loop through all of the samplers. Again there is more than one way to do this, here is how I would probably do it.

for (s in samplers)
{
}

Then inside this loop you have the original loop I posted that checks every key and colours the right one, only this time it will do this for every sampler in the samplers array.

reg i;

for (s in samplers)
{
    for (i = 0; i < 127; i++)
    {
        if (s.asSampler().isNoteNumberMapped(i)) //s is the sampler being checked, we get s from the outer loop
            Engine.setKeyColour(i, Colours.withAlpha(Colours.blue, 0.3));
    }
}

[gorangrooves]

@d-healey Thanks so much for your kindness and for teaching me! I will be playing around with this and hopefully will manage to get it going :) I'll report back.

[gorangrooves]

@d-healey I got it working! Thank you sooo much! I still don't fully understand how you came up with the logic for the code. Good on you. Quite simple and most importantly, it works :) Thank you. Thank you. Thank you!

[d.healey]

@gorangrooves No problemo

I still don't fully understand how you came up with the logic for the code.

By reading lots of code and writing lots of code ;)

[Jerems134]

@d-healey I've many sample maps on one sampler and all keys are coloured at the same time, have an idea to do with sample map ?

//I've try replace 
const var Sampler1 = Synth.getChildSynth("Sampler1");

reg i;

for (i = 0; i < 127; i++)
{
    if (Sampler1.asSampler().isNoteNumberMapped(i))
        Engine.setKeyColour(i, Colours.withAlpha(Colours.blue, 0.3));
}
//by
const var Sampler1 = Synth.getChildSynth("Sampler1");
const var sampleMaps = Sampler.getSampleMapList();

reg i;

for (i = 0; i < 127; i++)
{
if (Sampler.getSampleMapList().isNoteNumberMapped(i))
        Engine.setKeyColour(i, Colours.withAlpha(Colours.blue, 0.3));
}

Not working

[d.healey]

@Jerems134 I don't understand the question, could you rephrase it?

[ustk]

@Jerems134 It is not the SampleMap you need to check but the sampler itself Sampler1.asSampler() assuming your sampler is called "Sampler1"
Perform this each time you load a new sampleMap

[Jerems134]

@d-healey @ustk On Sampler1 I have 2 sample maps loaded and I switch with presets/combo box.
How to color keys only for samplemap1 and match coloured keys on samplemaps2 when I switch presets ?
Actualy all keys from all sample maps are coloured no matter different sample maps mapping.
They are layered.

Full code :

Content.makeFrontInterface(1200, 370);

const var Panel1 = Content.getComponent("Panel1");
const var Panel2 = Content.getComponent("Panel2");
const var Button1 = Content.getComponent("Button1");

//Tab button callback function
inline function onButton1Control(component, value)

{
    if (value == 1) 
	    Panel2.showControl(true);
	    else
	    Panel2.showControl(false);
	};

Content.getComponent("Button1").setControlCallback(onButton1Control);

//Presets ComboBox Function
//Sampler
const var Sampler1 = Synth.getChildSynth("Sampler1");

//Sample maps array
const var sampleMaps = Sampler.getSampleMapList();

//Combo box
const var cmbSampleMap = Content.getComponent("cmbSampleMap");
cmbSampleMap.set("items", sampleMaps.join("\n"));


inline function oncmbSampleMapControl(component, value)
{
	Sampler1.asSampler().loadSampleMap(sampleMaps[value-1]);
};

Content.getComponent("cmbSampleMap").setControlCallback(oncmbSampleMapControl);

//Coloured Keys
//const var Sampler1 = Synth.getChildSynth("Sampler1");//(Repetiton)

reg i;

for (i = 0; i < 127; i++)
{
    if (Sampler1.asSampler().isNoteNumberMapped(i))
        Engine.setKeyColour(i, Colours.withAlpha(Colours.blue, 0.3));
}

[ustk]

Add a hidden panel on the interface. Wrap your key colour code in the panel callback.
Don't forget to enable saveInPreset so when you change preset the callback is called

[ustk]

@Jerems134 sorry you already have sample map selection in a callback so just place your code after that, no need for another panel…

[Jerems134]

@ustk Key color code is working, but I use 1 sampler with 2 sample maps, I would like color each sample maps on the same sampler when I switch sample maps

[d.healey]

@Jerems134 You mean you want to color blue keys to match the range of the loaded sample map? If so I'd use two hidden knobs, or a range slider, to set the range of keys to be colored and save this with your preset.

[Jerems134]

@d-healey I’ve to set the range with knob or it’s just for saving preset ?
Its possible to make it automatic ?
I already have the code to save a preset. For now just the first samplemaps color the keys, when I change samplemap/preset, keyboard stay coloured like samplemap1, it dosent match with samplemap2.