Delay Effect Produces Static In Compiled FX Plugin. Need Help!

[Matt_SF]

@Mwins hard to tell without taking a look at you project. The delay effect works fine, the noise is probably coming from something in your project.
Try to build a plugin with only the delay module and see if the noise is still here.

[Mwins]

@Matt_SF thanks, that's a good thought, trying that now. Lets see.

[Mwins]

@Matt_SF said in Delay Effect Produces Static In Compiled FX Plugin. Need Help!:

@Mwins hard to tell without taking a look at you project. The delay effect works fine, the noise is probably coming from something in your project.
Try to build a plugin with only the delay module and see if the noise is still here.

So I just compiled a fresh plugin with nothing other than a delay in it and I am still getting the same static. I'm using the same cpu I load hundreds of other plugins through with no issue so I know its not my setup. I'm thinking its either a setting or a bug. I haven't messed with the plugin settings at all.

HiseSnippet 953.3ocuV0raaaDDdWYQ2HmeZSPPQOJTfB3.jFHYmlVfbvL1xpUH1NBgNA8VvZxgVKzxcYHWlX1hBzi8Vek56P.549Hz2f1YHkHoiUsUEZpNHv4OteyOeyxwIFeHM0jv3cNNOFX7a33kqsS1ahPpYiFv3ejy.PIxY6lGKRSg.Fmu12RF4cZyJ98m6rqPIz9PsJF6kFoObfLRZq0N18oRkZnH.NVF0v6G5Nx2n2ynLYHPVyoGKV3OUbJbjfbqkCiu99ARqIwyJrPJ5ytlfbuIl2pK8+kxT4IJfD5y7vWToZ1dSjpfwySxTFi2dbcJuVYJeWmCkAxJ80o9mTXnacDMqA7VWFj5+u.R7FPpcIjtsimehL1Vagvy0cFosPRn.K0MgRouL9u4rmAcPaePjXJLLAEpBXyG0q286h+cuGGlo8sRitqQejwBOSu4813G2nyF+zFceeSggKzFcLIFkBRVnYp6lbYAtoNK5DH49ceiPkAUNho+4qoqub0T+xrtgiF8Hsz9rXXl7PiJfpUzyWrCvlU1vdQqYHDc0VzIt0rNgmRF.ILY.wHdp1bReVA3aNyyV5f2ZAA+hQCDVAMOLCNHDigDqjpD7AvaPBU4zQGjRlN0ZhKvaTrQSfmeyqDwmw3N7eEOqb5geGeH0lS0y0KbfEICBTvXSpj5W0n6ycSsPrm7Gflr9HwY0ha4FJUQoV7jGEgTWF+NNuHE5F.ghLksa5TjToj5oPvwlBNc77NvHDgWqbKSej4mfjdbnkz9wkZo4oCfPKKxD.DM3X.SZbOkOUxqx+abkE8Z75l4lWI7yScWt5verSZVXn7LZP5KXe.R3a4LDffSvseMx2O04HSRjPgk+fwPhOlrz4wt3ZCbgkIHSIrmeKFstdlAJcZt5f1OnwzLuYi88Ws09elF1qAM7JHYKIbusyXo0exhwaqEfWh09AFuytn3lN6GFB91Zv11Y32eo2Jzd41fUCkq7FhqWhk4WKSnnZVpIRNOyopZ8YtUFdt7zIMrbW2yM6Up2c6se2Ny02LfBCGXd6X7.Gl.ut587Kuy86jWPKaf6gxyZxjp4vMm7V6+nKUYO2jYk5SOTfDTZs2QYQd3mW3CXySqAUJsArEsytTtGISfvCzAEB+E9alw9jLelw9yM9+xYDI7SLuxu7hEZV3ZEZv7VW7wQcbNjj6VccjiSuGzi1fIekuOMg9k3z8hiYqUHlsWgXd3JDyWsBw7nUHludEh4atzXnuY7IYVST41KTw38KtYmy2WKvo2B5I6u0RlKHM

[Soundavid]

@Mwins Hi, what kind of noise do you have? Is permanent or when you move a parameter? What version of HISE are you using?

[orange]

@Mwins

Which Hise branch are you using to build your plugin? master or development?

With the delay, are you using IR samples with the convolution at the same time?

[Mwins]

@orange Yes. It is a delay and it has IR samples in a reverb. @Soundavid I'm Using the latest develop branch just before this last update released a few days ago. The static seems to be happening on the delayed signal.

Weird discovery: if I turn the feedback on the delay to 0 on both left and right channels, the static actually goes away... It has to stay on zero or its right back

[orange]

@Mwins Is the IPP enabled? When the IPP is on, convolution reverb can cause distortion acording to the IR sample. Maybe the issue is not related to the delay. I suggest compiling the plugin again with IPP disabled.

[Soundavid]

@Mwins I had a similar problem with the FX before, but the problem was only in Logic Pro and only when using Send Containers. However I don't like the build in Delay FX very much, not really smoothed parameters and too much Scripting to using it in a Stereo mode, you can build a really functional and Simple Delay in Scriptnode like this:

[Adam_G]

This post is deleted!

[Adam_G]

@Soundavid this works incredibly well, thanks for sharing