controlling Sliderpack idx from a different OnControl??

[d.healey]

vol.set("vol", (value) ); //ERROR!!

What are you trying to do here? And what do you think vol.set does?

[ten7kur]

@ten7kur said in controlling Sliderpack idx from a different OnControl??:

Im trying to control each index of the sliderpack via other Knob/button.

Want to control each index of a Sliderpack via other knob/button.
My snippet already controls the Sliderpack items/Indexes but the Simple Gain module/component does not take effect from my knob.
I know i can do this in the Property Editor but i want to do it from a Sliderpack.

@d-healey said in controlling Sliderpack idx from a different OnControl??:

vol.set("vol", (value) ); //ERROR!!
What are you trying to do here? And what do you think vol.set does?

Trying for my knob to push its value.. So that SimpleGain responds/re-acts/takes effect
At the moment only the Slidepack takes effect

[d.healey]

@ten7kur I think the problem is you are not familiar enough yet with sliderpacks. I don't have time to debug your code at the moment. Until I do, or someone else does make a simple project with 2 sliderpacks and play around with it so you have a good grasp of what everything does.

[ten7kur]

@d-healey said in controlling Sliderpack idx from a different OnControl??:

@ten7kur I think the problem is you are not familiar enough yet with sliderpacks. I don't have time to debug your code at the moment. Until I do, or someone else does make a simple project with 2 sliderpacks and play around with it so you have a good grasp of what everything does.

Probably not! Ok. will try. Got shitload of web develop to do. Havent even ate today! no gf :))
So @Lindon s advice of a missing attribute is a no?

[d.healey]

@ten7kur Well the sliderPack doesn't have a property called vol

[ten7kur]

Something strange is happening!
Could i have found another BUG?!

inline function onS__VolumeControl(component, value)
{
    	if (value)
        {   
	    vol.setSliderAtIndex(0, (value));
	    //vol.setAllValues(value);
	    vol.changed();
        }
};
Content.getComponent("S__Volume").setControlCallback(onS__VolumeControl);

This works! It adjusts/controls "S0"(the first sampler) volume. But if change the index to 1 or 2,
eg vol.setSliderAtIndex(1, (value)); ,it doesnt work anymore!
Same goes for if using: vol.setAllValues(value);
It only adjusts index 0.

??

[d.healey]

@ten7kur

eg vol.setSliderAtIndex(1, (value)); ,it doesnt work anymore!

What do you mean by doesn't work?

[ten7kur]

@d-healey said in controlling Sliderpack idx from a different OnControl??:

What do you mean by doesn't work?

vol.setSliderAtIndex(1, (value)); 

This should adjust S1's(sampler1) Volume , but it does not. Only index 0 responds.

[d.healey]

I just took a look at your project. Are you putting each mic position in a separate sampler?

[ten7kur]

@d-healey said in controlling Sliderpack idx from a different OnControl??:

I just took a look at your project. Are you putting each mic position in a separate sampler?

I dont quite understand what you mean...
Im not specifically doing this for multi-mic samples. Just want to get the functionality working.

As you can see the SimpleGain's are in separate samplers.

[d.healey]

That's not how multi-mic samples work in HISE. You only need to use one sampler. You can read about it here - https://forum.hise.audio/topic/75/multimic-samples. I also have videos on my Patreon page about working with multi-mic samples in HISE.

[ten7kur]

@d-healey said in controlling Sliderpack idx from a different OnControl??:

That's not how multi-mic samples work in HISE. You only need to use one sampler. You can read about it here - https://forum.hise.audio/topic/75/multimic-samples. I also have videos on my Patreon page about working with multi-mic samples in HISE.

Yes i know about that. Like i said "Im not specifically doing this for multi-mic samples. Just want this functionality that your script does." ie, the searching of a specific term in modules, and the grouping of all controls in sliderpacks.

The question is when using vol.setSliderAtIndex(1, (value)); , why wont it respond.

[d.healey]

In the on control callback you are setting the simple gain[value] - so check what value is. But I wouldn't do it that way, I'd use individual control callbacks.

	switch(number)
	{
		case vol:
			if (mute.getSliderValueAt(value) == 0) //Channel isn't muted
			{
				gainFx[value].setAttribute(0, vol.getSliderValueAt(value));
			}	
		break;

[ten7kur]

@d-healey

Appreciate the code but where would i insert this? im guessing in the muteSolo() function? bit overwhelming!

[Lindon]

@ten7kur said in controlling Sliderpack idx from a different OnControl??:

The question is when using vol.setSliderAtIndex(1, (value)); , why wont it respond.

It does respond - correctly - the second slider in vol moves... but if you dont connect vol to the samplers then nothing else is going to happen.

I looked at your project snippet - you dont have a call back for vol

[d.healey]

@ten7kur

Appreciate the code but where would i insert this? im guessing in the muteSolo() function? bit overwhelming!

This is already in your snippet.

It seems to me you just want a knob to control the gain knob of three simple gain effects. So why are you using slider packs at all?

@Lindon said in controlling Sliderpack idx from a different OnControl??:

I looked at your project snippet - you dont have a call back for vol

It's in the master on control callback :)

[Lindon]

@d-healey said in controlling Sliderpack idx from a different OnControl??:

@ten7kur

Appreciate the code but where would i insert this? im guessing in the muteSolo() function? bit overwhelming!

This is already in your snippet.

It seems to me you just want a knob to control the gain knob of three simple gain effects. So why are you using slider packs at all?

@Lindon said in controlling Sliderpack idx from a different OnControl??:

I looked at your project snippet - you dont have a call back for vol

It's in the master on control callback :)

-- which is full of bugs..

so if you delete the on control code and put it in the init like a "normal" approach it works fine:

HiseSnippet 4022.3oc6bs0aabbEdojVaS5nTmKsHnnAXBQAxRDYJRJKaG6FDpqNLwRhPT1NANB1q1cD4FsbW1cWJYl.Aze.EHu0m5i8GP+CT.i9Tdo.8mRdnO09P54LyrW4RpUxxFVIjIPl6b4b9NWl4bNyNRMcr0ntt1NR4xuyfdTobugbqAVdcVoipgkTiUkxcY4MZ7kqsszxC5o55R0kxka56gclK+LRrO+3mtrpopkFMrIIoGZanQuuQWCuvVaV+KLLMWWUmtiQ2Hi9F0anYashsoce.HSKWQpmp1ApsoaphCaJYobWZMcCOamVdpdTWobyrrs9fVcrOxhO9GZ3ZrmIEenpTKfP7lW21TGQL1pzJcLL0a5KvtRR4tRyPweZt3+txaXnaDzdnZ3ZrNHgyHp9H2TiCdUiBuJYGd4h.uY3v6sjao4XzyKrGDaWUtgkG0YeUvDDEV7wJM0Q+F4UrgQX4Utq5Az0cfGBlgxh2rxbjEqTozcms.++.igqG4PUGxJ1c2ydY6mQ9DhOET008aUon+2JNGoVEfL0VDHy7ySd7m2ZqMCl8tyVve1tTD68nNdFTW.HcwAFiNe2rEJ5QelWw6PJ1zgBSvs3bPaGYn60AZr5s+X7w8Zy8WfVtQsac6pebkJ2tB1ggGs6I1UMVeUqV41UqU8lXe8L621vpopC3xAZFzyKIBvo6hMVb1BGiZKTPmOojh+27yuM0ywfdHk3ZzsmIkzF7iHq+kjiL75PJ10PqHAZvqC0vgzXUhpkNwEbfnXq3Xggp53nNHpwfSJbsWCcWvhvVnVtM0qg98Mb8TJ1hyKbDEKcWx7yeOpGPcWh89Iww0IUIfUf.HIJKXrFs1OdWl2v91NDk1Hnhw7RyV.LS4M1mn7AqYA5MJ3X4o0g5tMsM8YJsmiKikJQ.Z6YX0mhvo0AF8HvjL7H51TWqOzi0MBo.UhgmK.Yf3bnTtWe2NJAR5Z6uOUySocIT8ebRUsJBQG23ZyvVGRex6YTJSduCqHEzKEJ4lPw4Fg+gZM+AmPzD7SwMT178pvUMJB2u4hPvxeisgkRwuFr17EuD3igkIXOH622Ryyv1hfarxICtFzw1TQytaOaKX03b.3M6SKwmH946B+JXt3LprospN+6an1Sw0+anZp5iYT35U2szcyGN2iCPSTQPv+UTMM2C1eWYHjgBANog9IaolC0quikKtng.qQU0U8TIptj8LZSXKBs26a.mixjCnCPqMkMRvpMGyg.efAVhAzqXvPqpdjA18IZpVjd185aB6fyWkpZMvqigUa9Xv92ih9qGBadQA5YCTgwWWv+ypcYDjgtDAHDbsD5w.iLn71PzMyWia7hNas9NNfAZiPh3SuGGgZqvGU.QanqTZWAs.0kpNA2oUEcCtCAVcpc.SK3o1lf9m32ELxb.AsxfXwMucU6wjGi8UR.kGWDltawcKKV45pTripitFrZqXIbJBWH.AsrAPiZvxkYDSrdkbjC3JGBMljmNSv0SE2AfaUvum8kZ9eYghARZw8MgUREYxSBZWlrSGvbeDj1AnPPQjMpd11lQkUhhp6.KsNPfQ69tlCJwvqullQSenobB5+4RZ6R2olC868fFQ2F4PaSPhcMMzoNMgUHqqpA6hMPABrB+eQnaL9Hu+k5Z22x6Nw1VtrI0psWm4fc0sty0qhAj6p9r6rvMgMM7n8ZY7sz6TobkprfWgrUmZpNHUFW8FBVyFxof4BNuHBgwwZVP8TYcsaKXMOt+ol00NIV2CVPmFiuQMAigAblT2UOIN2sO3hNB6b0ZKhwNgQjQdGvnjbwERzYzFUNevw7hxmd8cZSGsIjyH1fNabJJuLU2iZFDkk+DOLZjrSuO1rRwGZa1uKxS.D2tBK.43mvpBebl9ISy3QBWSlfloYzj4Swbwxz32f6HfYVWYwLL9VbCJSDx1LZJrLLYveJ3dSq+fMWYmFasYqYKjLkhgM0OaNxf4HVPRyygQVEY5vhjwCsGu.hVADPgOGb9bFmG12k5ELsdAEK.cwRp5.LoJjGPHl0T05fg6EMAAzgQgbNuX9rLmNfgoGevtHGxCQgfLUhM.H.hpamk.g6PTUrupoKUfFdRG9vASLi0dRMBtfE08JBI2g1ls.bKbOFF8vrHW2DBbA4MXXoang4Y.4BCoVXRUA+aHiLHFspkE0DyPAmMUmi04meUrljtHKwoXMvej77b3ikoDb.8JxBPr7A.Hbs8UdF.bpbWhA4OHR0WrpCZ5i9n.MJaqCtQF0m4QLvR1G6fkFCquGhYSsjmhQIxm7IjpkvQwT94CDcOm9QjbLOpwKu44eXDA0on4gyrkfJV0gRKLfUCrTx2wtcanfF1lotXc23jNVXfYjHCRbn3M+7M.M6vHhoIOjsWBl8Oj6Jwx155hNCLCfJGV+.5HK6TnATDIqbjP5fz.gdHIB0xLAejZ4XUT0nsER23ThI+Y0nADYkT75DFRtJ6wF6hFhk7fDc2CXEFnBDkzHJaI1Y21kGfOMNjrr8FBV9hE5iwcxP4nQFVM4SgwHYXjbFJwMe4IIyIDahbuKAL2zNzC3zvhQp7xikyx8UDD9CcEdMgbW3jer+w0.6Xt082hL7tR1VK+jmfaKMlJ+7qimWZjXcrnTP153gMiUminTsDSEYnC6bu0lyu05qym0w7+A0OhxQiR6JgzF+mQSdL1HNBeZB5E9f6Xejuvvk.wVx9AWvrx8ERkhBwuXozK+Lt1w+7ule9Gt08SSY15IOgmTw3UmHjCUoQKtNH+eQ80rimKLVXJKXr7vfETPIqa2eOSZ.exij3Pd7qgUe7Qgpv4m+Qas8Wz5C9fPFiyBctZS0YUdleznQoEqzV+nvC1jErlUpBiCwJpgSFAlh.CheEPwGfnbF3m7yPX2wONzxxVonDmfGON6efEaTd.IMogmA5vle.Gmv5HnavKkVtGnz.tuBSIy1AAqzjZ5vNPnNTGJTQbwRAYSjN3Q4dDvNDJHQhfwMs8naYoTpv2UHegiKPR1096mZeBhgG+TZcimVuy3lnhU+t6Qc70F9CTJ2LwOWb4Qet3QO1dMt9Hx.ssZXY3sUOp0nNsbIgRTRJWAAp.16wN072VNoysjgNfFYPOJwfbj2bQcrncob+Z4p0J29OduiJ6du0dXi6CVr1M4bICj9xxrJlGh3RQHd7OKr0of3rZhSR7e7SiQ78WYkkJW9a+7Ugu9MYG4xxPcuiUofz9ifer7mAjdU6CyLoujLFv+TnSJW9TPaL9vInRNiz9xxrxWOIfyTJk+3URZLmlS7qIHt+YdxHcA4fGGB5CQg2LF7Xy+pxA6fEi.O86+me9yGIAVtummsEi.4kEAAGV5jdPiUQATJWNwZqv2bCz1pzCMzn7WKUd4UotG3Y2SJ2aErCFftLr76YvWxgbaf+WhdDAXaSCs0UEFW9K86EHKR8Z9yhujvG9O+o06PMZ2IxKebm5cYuzxK8W+I9G+tJ86tEppBPc9Lsxlg6+bFw8+I2KBtOMfiSNF3dubYCb+fz4E3JjgcVXP6uchPKtoRfTcoWMpQwFUwcMOdDP0+3pP.l6UF.Y61E2G70I.5ukYbGwWsHTlivYEHjcdWLvcEYwNlwMvMSiEQI3LihfWVd0T1S.oWFm9iRYUalmtrbygVWkbxiTWbI4MF1U+ecRZhwPtVC6Xd1I2kkalhazIRu2HaQbYT8G7Q4+0eGQtOIdEDv.ahK.P.Cuz+P3f5eADv1fG+IrsvKXP5sVSz7+CaNkabPTFxdcuHdaUoPqpEZUKlA8RYJkfmEMd9ffGdZ+57cTE8srHzn3wu54o32M1bGBo0y2qdHejNrtzv2gkqIugsN9dVie8ZvWCfnCn1hX2iE7tpX4Z3MHZ5QuTtyMYEtukbSCOsNoi2oRAuPVTurwq3FLMqL+RRDB1YjW+Ke4eckhBk2eG+fCdNTUv4ps3slJvSqJmGWmrdY95j0j+teEwXDC640WtOnobh25euNiU9AnB4kPB1l1ip5AF9Hy4J02d664X2uWxY8ieJyMYGGHtHnDh1wVVTPi6EUFWww10cePbXzxMZWrsA0i1x1zCoNtwaay9cEGbJVqcNbC8G3RQqrg1FpdNFw1OfwkJ6nxrzSIyetZhmqk34ER77MR77hId9lId9VgOG9ZyWkeG+RbXAWNaGV.P.H9G0LxHW1nc.w4sD00MPMyfRjKQXJWAuK8x5FBNc1Vx8hbq.eGQqgHpZp2Nv0mRNxsyikJhxsVnRo6F8R68YrTsTvq2WgHuP1Cr1ac7Xxh8189BK68TJJ5h+1KwoIZfendra32bjhrYuSeXbIGgKr3z.uPfE07Rz4134povei67ejbxcMz0MoMsgMggMmKxAPbbuhsJr9YDHm2I9lTWLD87FiieAUhHAQGUnL35MT29RQM7kjGHCQmdZRwEmC6qv40g84Ko9sTQJP.i1TnbEsUl3jxvBaZrmk3TY3PXxKK78R4LTxzY3DX1OuNDloFtn7wh6gODl3tdQQTjh0BBlkH8wXIW9U04qBv39Zdh7pupbvBeIoLA1nZIFb+KmSvUINbUh.WWe3Nqbj04Ru5xo87IJQdeLxuevqYcHjMDzBhw2FbZ1WsuomeqwiQrgskcuN1VFZwy8.xkncapSTrmp.sjmGdj.As7t02lhuf1Hliee86CtBpNwSo5ToKpdpiXlp858j4vkf6YP94QsHSeQqVjyGW9qD7KyRvULS3tG4NxWEu86ipPj5e82+d04GqSDE2iherCp0GpTEbg.dCgaZap5jTsO84kK8LY12.EoKN9xuM+jztHAXlKwEG.eM7zBeM.taa22CJI1urTYn10VP85ZznUvNElAE+4J9g5aQszYOfuX.QmU8K2E6rpemYUk.YavpVj.Rni2q41u2PlUGMAO1ieNa67uWU3F6huyRDN2zTKrtc1AsYRgjVhksmH2sojOcmGU0ImG0jyi5WxmG0q3XPW.KLp1jBilTXzuLJLp13JLhceYNgBi9SObnBipWu9jBilTXzjBilTXzjBit3TXTsIEFMovnIun9WzztDP5pLNi23NGwdVAOG+DHN2RHJKuJyHWoq2T1f8aTnnor+9LiPiekLrSSKu9ZGfujV2THxOmKSbgIkINoLweYTl3BisLQ7ZkFuLwmpUOdYhRZCUlHY6mOoLwIkINoLwIkINoLwWaJSTDN32JeOS68TMCUq7+FfIxl88EcSB5mDLfw8B192m+0QlLRwLYKRwI7GjyY9Ywae4cFxL4NICsKb+1V7pXOjWE7nqpli8SD+8Uh8GkWVKfbaI9EhZC7YRU+5HkkqTtBdgOMdhlFptudUIozmSsyvbV3LLmabFlyhmg4byyvbt0YXN2dryA2Wao9d1c4KEgFZtFOzRt0BBsLsz+Gv3.S1I

[ten7kur]

@d-healey said in controlling Sliderpack idx from a different OnControl??:

In the on control callback you are setting the simple gain[value] - so check what value is. But I wouldn't do it that way, I'd use individual control callbacks.

	switch(number)
	{
		case vol:
			if (mute.getSliderValueAt(value) == 0) //Channel isn't muted
			{
				gainFx[value].setAttribute(0, vol.getSliderValueAt(value));
			}	
		break;

OMG! i am completely lost! My heads about to blow up!

@Lindon , the snippet doesnt open anything..

[Lindon]

@ten7kur said in controlling Sliderpack idx from a different OnControl??:

@Lindon , the snippet doesnt open anything..

How do you mean "open anything"?

[d.healey]

@d-healey said in controlling Sliderpack idx from a different OnControl??:

It seems to me you just want a knob to control the gain knob of three simple gain effects. So why are you using slider packs at all?