Scriptnode modchain issue.
-
@lalalandsynth The skewFactor is not necessarily set to 1 (linear) like for frequency values or like here, time values
Because you want precision at lower values -
@ustk I see , But I would need them all to be identical or I will get a slight pan.
I can save a curve but only to use for that particular curve, cannot copy between them.Or something ...I am getting a slight tilt on the stereo image , not sure why ?
Having said that , I am getting closer to it sounding correct again.
Obviously I am making a stereo ensemble so its a bit "extreme" or "modern" but man does it liven up the strings. :) -
@lalalandsynth Are you modulating them with a peak node? I was having issues modulating the panner with a peak module. It seemed to never get fully right. I think I got better results with an xfader node.
-
@crd Yep LFo into Peak node.
Much better after I set the response to linear. -
@lalalandsynth Yep linear skewFactor is what you need.
-
@lalalandsynth said in Scriptnode modchain issue.:
cannot copy between them
yep, only solution is to setup one of them and duplicate
-
Sounds great I think , needs some tweaks.
Will have to check for any phase issues , but does not sound like that will be a problem.
https://youtu.be/hGT39Cm_5xQ
