Collaborative project!

[hisefilo]

@ustk well I did some tweaks. Regarding new leslie makes click noise too much evident. also bypassed gain4 hoping you to just lower it down. but.... IMHO this is sounding so so nice, I'm good to compile

[ustk]

@hisefilo Was on it, let check what is gain4...

[ustk]

@hisefilo Are you really sure it's gain4? It's the node that makes level deviation of the horn's left doppler

[ustk]

@hisefilo If you do that you risk to kill the left/right balance... What do you want to achieve in the end?

[ustk]

@hisefilo Please do not use the smoothing in the gain node, very important!
Better to change the mod range value here!

[hisefilo]

@ustk I did't touch anything. just turned off this guy.

But I get the same (or similar result backing stereo with to 100% for main gain module. (was 200%)

[ustk]

@hisefilo If you do that it's only modulating the right channel now...

[ustk]

@ustk Do you just want to reduce the overall horn level deviation? (stereo amount)
If it's the case there's a much better way ;)

[hisefilo]

@ustk yes!! I guess turning back width to 100% does the trick, right?

[ustk]

@hisefilo Yes of course! if you don't turn off gain4... please don't do that...

[hisefilo]

@ustk Deal!

just turning back this width to 100%

[ustk]

@ustk In my opinoin the 200% width was the cause of many issues, like @lalalandsynth mentioned for the click/perc

[ustk]

@hisefilo To be honest in the tests I realized, 200% was a bit too much but 140-150 is a good compromise. Maybe not necessary to go back to 100%...

[hisefilo]

@ustk great!!!! I just did that some time ago to improve width. Now leslies does it :)

[hisefilo]

@ustk said in Collaborative project!:

@hisefilo To be honest in the tests I realized, 200% was a bit too much but 140-150 it a good compromise. Maybe not necessary to go back to 100%...

Okidoki

[ustk]

@hisefilo And in the garageband plugin, I noticed that the stereo is enhanced quite a lot... Too much? I don't know because it sounds good anyway...

[hisefilo]

@ustk Yes, noticed the same.... but I like it.... maybe it's better to test on Logic

[ustk]

@hisefilo Absolutely ;)
Also when working with stereo and phase, we quickly lose objectivity, therefore, it's important to check often in mono in order to reset the ears.
I compulsively hit my mono button on the monitoring controller

[hisefilo]

@ustk said in Collaborative project!:

Also when working with stereo and phase, we quickly lose objectivity, therefore, it's important to check often in mono in order to reset the ears.

Noted that now!!! hehhehehehe

[ustk]

@hisefilo Do you push a new version with gain4 back and new gain width?