<![CDATA[Pitch Bend Amount Interface Control?]]>Hi guys,

I'm trying to work out how to have a pitch bend amount on my interface that changes the value between 0 to 12.

(This is the parameter I'm trying to link..)

Screen Shot 2019-08-04 at 14.28.14.png

I tried it on a slider but I couldn't get it to work as I only have these options in the drop-down menu...

Screen Shot 2019-08-04 at 14.28.57.png

I also noticed that the pitch bend at -12 is actually 24 notes, as its set in steps, not notes. I'd like to keep the 2 octaves but hopefully change the values on whatever we link it to so it reads as 0 - 24 on the interface... if possible? I'm not sure how that would work as the knob step sizes only move in 0.01, 0.1, or 1.0 and there is no 0.5. Any ideas?

Screen Shot 2019-08-04 at 14.42.56.png

Thanks in advance.

]]>https://forum.hise.audio/topic/1665/pitch-bend-amount-interface-controlRSS for NodeTue, 10 Mar 2026 09:34:46 GMTSun, 04 Aug 2019 13:46:07 GMT60<![CDATA[Reply to Pitch Bend Amount Interface Control? on Wed, 16 Oct 2019 14:15:50 GMT]]>Thought I'd give this a bump as I've still not found a way to get this working.

@Christoph-Hart Would it be possible to add a slider onto the Pitch Wheel Modulator module so that pitch bend amount parameters can cleanly go from 0 to 12 (or 0 to 24)? At the moment it's unusable ☹

]]>https://forum.hise.audio/post/14614https://forum.hise.audio/post/14614Wed, 16 Oct 2019 14:15:50 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:50:11 GMT]]>@Tod-Slaughter

Definitely. I'll try a few things and share my findings later on...

]]>https://forum.hise.audio/post/12478https://forum.hise.audio/post/12478Sun, 04 Aug 2019 14:50:11 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:48:00 GMT]]>@SteveRiggs said in Pitch Bend Amount Interface Control?:

@d-healey

I'm liking having the full 24 notes. Just unsure how it would work getting a readout on an animation / knob to be accurate only having step sizes only move in 0.01, 0.1, or 1.0.

As it's not going to match the parameters you'll need to experiment

]]>https://forum.hise.audio/post/12477https://forum.hise.audio/post/12477Sun, 04 Aug 2019 14:48:00 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:40:29 GMT]]>@d-healey

I'm liking having the full 24 notes. Just unsure how it would work getting a readout on an animation / knob to be accurate only having step sizes only move in 0.01, 0.1, or 1.0.

]]>https://forum.hise.audio/post/12476https://forum.hise.audio/post/12476Sun, 04 Aug 2019 14:40:29 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:37:00 GMT]]>Yes I have a pitch bend wheel. And it appears there is a bug... with a constant modulator or a CC modulator the pitch change is correct but when using a pitch-wheel modulator it's doubled. @Christoph-Hart

]]>https://forum.hise.audio/post/12475https://forum.hise.audio/post/12475Sun, 04 Aug 2019 14:37:00 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:36:42 GMT]]>@Tod-Slaughter @d-healey

Just recorded a quick video to show you. That's definitely 24 notes up and down. I knew I wasn't going crazy 😂

https://youtu.be/UkgfRNyGjRg

]]>https://forum.hise.audio/post/12474https://forum.hise.audio/post/12474Sun, 04 Aug 2019 14:36:42 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:29:25 GMT]]>@Tod-Slaughter

Yeah I'm using the pitch bend on my Roland RA06

]]>https://forum.hise.audio/post/12473https://forum.hise.audio/post/12473Sun, 04 Aug 2019 14:29:25 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:28:54 GMT]]>I'll do a quick video in a sec. It's definitely going up and down 2 octaves 😂

]]>https://forum.hise.audio/post/12472https://forum.hise.audio/post/12472Sun, 04 Aug 2019 14:28:54 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:28:49 GMT]]>@d-healey have you got a pitch wheel? Mine's currently broken

]]>https://forum.hise.audio/post/12471https://forum.hise.audio/post/12471Sun, 04 Aug 2019 14:28:49 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:27:52 GMT]]>@Tod-Slaughter

HiseSnippet 1841.3oc0Y8zbabaEGqnWaIEam33jzdIo6LMcF6IoVjx+KYZmw7uxhSIsX4RG2dHiGncAIQzt.a1EqjYxjYxgdneLx4dHSu2CQeGxGfjdr27odM8AfkbwRQ4PlQ10lGzr3A7.9geuGd38f5Ey8HII7Xj0FClDQPVWz1cBSLtwXLkgZ2DY8ar69vNCZ63VqauNsbFzxc.78ib5zpVSmJNn5ShvIIDejkUo6KUxZiygT+d58piCvLORtHD5S3TORGZHUjKsW0+DMHXGrOY.MzXz2pZaONqAOfmB.rjcYTD16.7HxCvxgslMx57s7oBdrq.KHIHqyUm6OwcL+Hld7eBMgte.Q1nBxElHs3c3A9RDKkhZLlF32aJQjfPV18xokRZZ4sr6R8oyjmSOugpCmbML4Cq0dVvqhI7Ju7vyx.dmSCuqX65ESiD48Hw1qY2lIHwCwfIvDV5whr9W1M3v.XhaDhOfrSLzXlBW6NkK+gN2tb4q+GFlx7DTNygyd.WP1icsqu4Wt4Fa9UaNeOCGtntjKRLOHfDundkl73mgZWikFtOI9CcNDGjRlNNXmWjZsOcp0zx6o2vFCjyZynh8hHrSivQYrDP8kx.E33ITD+amQ70R8o7GgOjLjGGhn9ROl9jCIw66ztuyrNT6AyiCwX1HBrGhAygs0LIsX9x1+v6uNZHMHye+as25gIj3js7GiiO.XpCFuUStWZHfsjs1ssaKoa3mQ7DINaWtxGu0G3z8u5LXu853tE.h9jjHNKgj3bMXWbHOHUQzZTd8hi.7EBcTABbZAdMLAEGbJ5QiebBNLJfjrUiZC1sUy905biivGpoMEWURyUWNiqbCn9jXEIcU6dTg2Xm5DluSsPdJvxywQO8dm5DUOUH3rrIpMCvivIe9NIYidX6lXAVdDJyjB7UDnEU5AY0jbHDaRefZC6ljjCD7HkMODnEoCf0E+EY0eRNHXUmLqgy3pGQ8EimI3aBqNlPGMNOz3w9Uil5I11WtvmzDTAk.dy6LyMAXIxSDSiZtw4u5U+U+jbtnBRnV51Rwu268amSrTpkkkR59ixkcoOyQICcRhXIMo4DvO94FD.pybDfyn4Ifu9OWklzKHcDk0CGC6OH7DrEWq.q7qyVxGMlPBb5x8SCvPngJv0EYpHGkNZHKgJlfhJNiZh6BfM2COAER88CH83vHAV1zAJDaXJe52YRHquRtlOwbVmX1nHgb7mNOgfta0eA68Myv.D+GcxaOf6vlpm4Eaxayy5PxCl2fjyjFmSetba2xB2qn4gEi20V.dgn.OuwaVtCWxt0vgPT4bvdN6c9KO+STvDJuqFJuosqHlfCorQtpf15DE1zNqUkyhz4hV5z45ESB3XeW5WXLriqVOE3q3hR+mUUKUV.Ei0JC48IQDr.L+F5rd098ueLOMZdsd58TNKChgzIApvri8XDf2El6wFw7jjgv1QMWIlc0KMdjjqxknhImTT1CRCAaOiQBjIpXIulGtHWZqodcwhXZgvApUo7.rxd+6r29V2n3uC2C9yvOP94G2P0VqRkUWksWcUt4pqxsVcUt8pqxcVcUt6Joh1QqKNRdh4cfSLG4zgf8gZf5Wq7cbFPRDmHqzKrbYkBSZOL3dXLx5zQyVPsj7C6kycIU6.iBdVP4Bm+k5pYdwccTokyV7yTv0qqw3ErqsaS29YW8n91oEbEa.jOYwfnc4LdzXNi5ULLAbrezHYxL4HdgaiZBADkpQZ7gEB7pRU4DR0C9jR5.QkBLEuKXTxa+9U0Y9XL.2zDQgv+RLGPvI4q2+8eTskGuXH2yRZ2dIcMtjsdS5ntt4k6zTt7TrpsHubC1KpSH9UAd80sybXekfXurc1YoWEn1mYl0kVpLqOaB8t9zWnTgGUAOJ.dpk.8yxq0oQ7.rpfRHgrrrAx2FypYxLtXHmKFajX62b++Co5Y1F9ro7gyF99JSWei2bPs9K9UHLq2pY7DihGpdyat0wOhHLD4f95+3wc.zx7JXQZGFkFjP5PXiLJCVlvtFWsYQoERjGra0g3oif74X9CFCE23WTMhOIn3Ua6RaXLG+8uuZSHQqBkAT43cdU8U2BkTr9kDUuVg9QDC37nBuxnTfwiLZU5rx+sOG.JazzxZrgZebg587HlU.slrpJc6xSQjKg4qZ7SvurNqLsbIYmUl14xGkUmAsidm+x9cspRRbjkM++Kn9hv14Mcpf8V12p2j0pDgIi+pBeDLe5pIoCGJgzZ1uXPYH1Kl+XO86NKw55JI.JYpfBaX2U11oxzGYVxtgPoSO1ySFe92WAgVrFauxZbyUViasxZb6UVi6rxZb2UViO5YngrN0ZoBdnNkjrmzW+uYBY8ZlMrsdihmCM++hoVo1LexSlZ7yhSl67ohSle1amzffSLFov4Fm6Ajilu5tXXCIk8ku02d++8W72jE2ES2OUPV76lmm.hUIT2dszmTrZM6jRIz+CXRRViF
]]>https://forum.hise.audio/post/12470https://forum.hise.audio/post/12470Sun, 04 Aug 2019 14:27:52 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:26:37 GMT]]>@SteveRiggs said in Pitch Bend Amount Interface Control?:

@d-healey

This one is just a quick test project I'm using to work out a few things away from my main project so there is just a sampler, ADHSR Envelope, Pitch Wheel Modulator, and a Convolution Reverb.

I've got a feeling it's because this is all the way up...

Screen Shot 2019-08-04 at 15.22.10.png

Post a snippett

]]>https://forum.hise.audio/post/12469https://forum.hise.audio/post/12469Sun, 04 Aug 2019 14:26:37 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:26:10 GMT]]>@d-healey

This one is just a quick test project I'm using to work out a few things away from my main project so there is just a sampler, ADHSR Envelope, Pitch Wheel Modulator, and a Convolution Reverb.

I've got a feeling it's because this is all the way up...

Screen Shot 2019-08-04 at 15.22.10.png

]]>https://forum.hise.audio/post/12468https://forum.hise.audio/post/12468Sun, 04 Aug 2019 14:26:10 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:22:56 GMT]]>@SteveRiggs said in Pitch Bend Amount Interface Control?:

@d-healey said in Pitch Bend Amount Interface Control?:

HiseSnippet 723.3oc2V0saSCCE1osFwXvz.Mg3xbA2hTCL94BjVW6ZmlXcD0TFb2jI4rVKbrCNNk02Fdv3gXuAfcR6RpHr0TFvD4pb9rOwe967WbkBeHNVHQVqMbZDfrtK1aJWMtyXBkiNXOj0F39jXEHsyfZOMhDGCAHKq56a.rVqAJ847cZSXDtOjCgPGKn9vgzPpJG0s0anLVOR.LjFVX2a25.eAuifIRz7oNtIJh3+IxH3HhYa0vHqa0MfpDROEQAwHqFsEAS8FK9BOa+GSioejAFCGjm9CkA2SvBLL17NpyXJKvc98NFgrvt4pP8LUXKbeZ.8B7b0XyzEry8nndXU6xnmyUSOmRnGp.6ZjwNMIDAILhZQlYBGyVfJVLRc.WA7XpZZwvUEnayqc5derKU4Otb9VqD9pCT+o46rf+8vcO8TvWkS1F3deXUizqFU1HiJqi8nbHshLkHOL0198jIf89.GjFQ04WUT15aM+5xVTFszEku0WoO9gRBONRDuvG1CBoCEbihjC9tXnmD97.STtHdGAQV5RmuSO8krTe7HpDYZ5xtghDtZgzi5qT02hUME1eIcJZ7OnSQyafcJpubzsDEzx8ml3roNmNLhAc4S.lPiX33Cv6AmRRXp4nKlj2WvEQiEbpewLfAfRRGMBjE4doWncUJ8nkbjsZM.X.oX17iacnNKjH05DrhZgyxqEWV75Q3L5ZapLs++nCe8e2N7UX9dQcFmQ36f6H3wJhtChgpqegoyUQxydcaZjfQjlwTWa4B2jlBMPjnn7Q8I5hoyzJ1QIgd5l+9flIbNvzGD1ploAdlcSicV2edPpw20OyVzwXaMaQm4K9W4LBI9RwI5gWJofYxCtcJh9dyS+ex0z+Xq111AMgvRloRg5d1m36aD6mnUmx83oU1imUYO1txd77J6wKprGurxd7pKwCy.xcSThvr1CZ.2t6QTDctcWNQm4llki9AN0kD5

Very strange. The one in the snippet is only 1 octave. I have mine on a sampler and it's definitely doing 2 octaves up and down on mine. Weird!! I'm still on HISE 1.6.0 at the minute. Maybe it was changed in one of the higher versions since?

I have all versions and they all use -12 +12

]]>https://forum.hise.audio/post/12467https://forum.hise.audio/post/12467Sun, 04 Aug 2019 14:22:56 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:21:38 GMT]]>@SteveRiggs Do you have anything else in your project other than a sampler and a pitch mod?

]]>https://forum.hise.audio/post/12466https://forum.hise.audio/post/12466Sun, 04 Aug 2019 14:21:38 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:20:57 GMT]]>@d-healey said in Pitch Bend Amount Interface Control?:

HiseSnippet 723.3oc2V0saSCCE1osFwXvz.Mg3xbA2hTCL94BjVW6ZmlXcD0TFb2jI4rVKbrCNNk02Fdv3gXuAfcR6RpHr0TFvD4pb9rOwe967WbkBeHNVHQVqMbZDfrtK1aJWMtyXBkiNXOj0F39jXEHsyfZOMhDGCAHKq56a.rVqAJ847cZSXDtOjCgPGKn9vgzPpJG0s0anLVOR.LjFVX2a25.eAuifIRz7oNtIJh3+IxH3HhYa0vHqa0MfpDROEQAwHqFsEAS8FK9BOa+GSioejAFCGjm9CkA2SvBLL17NpyXJKvc98NFgrvt4pP8LUXKbeZ.8B7b0XyzEry8nndXU6xnmyUSOmRnGp.6ZjwNMIDAILhZQlYBGyVfJVLRc.WA7XpZZwvUEnayqc5derKU4Otb9VqD9pCT+o46rf+8vcO8TvWkS1F3deXUizqFU1HiJqi8nbHshLkHOL0198jIf89.GjFQ04WUT15aM+5xVTFszEku0WoO9gRBONRDuvG1CBoCEbihjC9tXnmD97.STtHdGAQV5RmuSO8krTe7HpDYZ5xtghDtZgzi5qT02hUME1eIcJZ7OnSQyafcJpubzsDEzx8ml3roNmNLhAc4S.lPiX33Cv6AmRRXp4nKlj2WvEQiEbpewLfAfRRGMBjE4doWncUJ8nkbjsZM.X.oX17iacnNKjH05DrhZgyxqEWV75Q3L5ZapLs++nCe8e2N7UX9dQcFmQ36f6H3wJhtChgpqegoyUQxydcaZjfQjlwTWa4B2jlBMPjnn7Q8I5hoyzJ1QIgd5l+9flIbNvzGD1ploAdlcSicV2edPpw20OyVzwXaMaQm4K9W4LBI9RwI5gWJofYxCtcJh9dyS+ex0z+Xq111AMgvRloRg5d1m36aD6mnUmx83oU1imUYO1txd77J6wKprGurxd7pKwCy.xcSThvr1CZ.2t6QTDctcWNQm4llki9AN0kD5

Very strange. The one in the snippet is only 1 octave. I have mine on a sampler and it's definitely doing 2 octaves up and down on mine. Weird!! I'm still on HISE 1.6.0 at the minute. Maybe it was changed in one of the higher versions since?

]]>https://forum.hise.audio/post/12465https://forum.hise.audio/post/12465Sun, 04 Aug 2019 14:20:57 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:14:57 GMT]]>@Tod-Slaughter

It is weird. Seems to be set in steps, not actual notes, so 0.50st is 1 note

]]>https://forum.hise.audio/post/12463https://forum.hise.audio/post/12463Sun, 04 Aug 2019 14:14:57 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:14:36 GMT]]>Yes it only goes +- 1 octave. You can test with a constant modulator

HiseSnippet 723.3oc2V0saSCCE1osFwXvz.Mg3xbA2hTCL94BjVW6ZmlXcD0TFb2jI4rVKbrCNNk02Fdv3gXuAfcR6RpHr0TFvD4pb9rOwe967WbkBeHNVHQVqMbZDfrtK1aJWMtyXBkiNXOj0F39jXEHsyfZOMhDGCAHKq56a.rVqAJ847cZSXDtOjCgPGKn9vgzPpJG0s0anLVOR.LjFVX2a25.eAuifIRz7oNtIJh3+IxH3HhYa0vHqa0MfpDROEQAwHqFsEAS8FK9BOa+GSioejAFCGjm9CkA2SvBLL17NpyXJKvc98NFgrvt4pP8LUXKbeZ.8B7b0XyzEry8nndXU6xnmyUSOmRnGp.6ZjwNMIDAILhZQlYBGyVfJVLRc.WA7XpZZwvUEnayqc5derKU4Otb9VqD9pCT+o46rf+8vcO8TvWkS1F3deXUizqFU1HiJqi8nbHshLkHOL0198jIf89.GjFQ04WUT15aM+5xVTFszEku0WoO9gRBONRDuvG1CBoCEbihjC9tXnmD97.STtHdGAQV5RmuSO8krTe7HpDYZ5xtghDtZgzi5qT02hUME1eIcJZ7OnSQyafcJpubzsDEzx8ml3roNmNLhAc4S.lPiX33Cv6AmRRXp4nKlj2WvEQiEbpewLfAfRRGMBjE4doWncUJ8nkbjsZM.X.oX17iacnNKjH05DrhZgyxqEWV75Q3L5ZapLs++nCe8e2N7UX9dQcFmQ36f6H3wJhtChgpqegoyUQxydcaZjfQjlwTWa4B2jlBMPjnn7Q8I5hoyzJ1QIgd5l+9flIbNvzGD1ploAdlcSicV2edPpw20OyVzwXaMaQm4K9W4LBI9RwI5gWJofYxCtcJh9dyS+ex0z+Xq111AMgvRloRg5d1m36aD6mnUmx83oU1imUYO1txd77J6wKprGurxd7pKwCy.xcSThvr1CZ.2t6QTDctcWNQm4llki9AN0kD5
]]>https://forum.hise.audio/post/12462https://forum.hise.audio/post/12462Sun, 04 Aug 2019 14:14:36 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:13:44 GMT]]>@SteveRiggs the modulator has a max of -12 to 12 so I've no idea how it's bending 24.

Knobs use the min and max values that you set

]]>https://forum.hise.audio/post/12461https://forum.hise.audio/post/12461Sun, 04 Aug 2019 14:13:44 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 14:08:11 GMT]]>@Tod-Slaughter

Awesome. Just added a button to toggle inverted. Works properly now. Cheers :)

I'm still slightly confused about the settings though, as when its set to +12.00st it's actually pitch bending 24 notes.

Trying to figure out how to have the knob animation so that I can make a read out on the interface that goes from 0 to 24.. and which mode and step size and frame amounts I would need. Confusing! 😓

]]>https://forum.hise.audio/post/12460https://forum.hise.audio/post/12460Sun, 04 Aug 2019 14:08:11 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 13:58:54 GMT]]>@SteveRiggs said in Pitch Bend Amount Interface Control?:

@Tod-Slaughter

Ah! That worked. Thanks. The pitch wheel seems to be inverted though now on my midi controller. When I pitch it up, the pitch goes down and vice versa

Also, what would be the best mode and settings for the knob to achieve the 0 - 24 range?

Would the knobs animation have to be 24 frames too?

Screen Shot 2019-08-04 at 14.54.02.png

You may have the parameter inverted so just invert it again.

You don't need 24 frames, just set the parameter range to your prefernce. e.g.. -6 and 6 .You can't have more than -12 to +12

]]>https://forum.hise.audio/post/12459https://forum.hise.audio/post/12459Sun, 04 Aug 2019 13:58:54 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 13:57:56 GMT]]>To invert the value click use table and flip the high and low points.

]]>https://forum.hise.audio/post/12458https://forum.hise.audio/post/12458Sun, 04 Aug 2019 13:57:56 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 13:55:52 GMT]]>@Tod-Slaughter

Ah! That worked. Thanks. The pitch wheel seems to be inverted though now on my midi controller. When I pitch it up, the pitch goes down and vice versa

Also, what would be the best mode and settings for the knob to achieve the 0 - 24 range?

Would the knobs animation have to be 24 frames too?

Screen Shot 2019-08-04 at 14.54.02.png

]]>https://forum.hise.audio/post/12457https://forum.hise.audio/post/12457Sun, 04 Aug 2019 13:55:52 GMT<![CDATA[Reply to Pitch Bend Amount Interface Control? on Sun, 04 Aug 2019 13:48:08 GMT]]>Use the intensity parameter

]]>https://forum.hise.audio/post/12456https://forum.hise.audio/post/12456Sun, 04 Aug 2019 13:48:08 GMT